BS EN 15416-3-2007 负荷轴承木结构用粘结剂.试验方法.带弯曲剪切载荷的试样在循环气候条件.pdf
《BS EN 15416-3-2007 负荷轴承木结构用粘结剂.试验方法.带弯曲剪切载荷的试样在循环气候条件.pdf》由会员分享,可在线阅读,更多相关《BS EN 15416-3-2007 负荷轴承木结构用粘结剂.试验方法.带弯曲剪切载荷的试样在循环气候条件.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15416-3:2007 Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear ICS 83.180 +A1:2010 National foreword This British Standard is the UK
2、implementation of EN 15416-3:2007+A1:2010. It supersedes BS EN 15416-3:2007 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CE
3、N amendment A1 is indicated by . The UK participation in its preparation was entrusted to Technical Committee PRI/52, Adhesives. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provision
4、s of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 15416-3:2007+A1:2010 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007
5、BSI 2010 Amendments/corrigenda issued since publication Date Comments 31 July 2010 Implementation of CEN amendment A1:2010 ISBN 978 0 580 63860 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15416-3:2007+A1 February 2010 ICS 83.180 Supersedes EN 15416-3:2007 English Version Adhesives for loa
6、d bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear Adhsifs pour structures portantes en bois, de type autre que phnolique et aminoplaste - Mthodes dessai - Partie 3: Essa
7、i de dformation par fluage dans des conditions climatiques cycliques avec des prouvettes charges en cisaillement par flexion Klebstoffe fr tragende Holzbauteile ausgenommen Phenolharzklebstoffe und Aminoplaste - Prfverfahren - Teil 3: Prfung der Kriechverformung unter zyklischen Klimabedingungen an
8、Prfkrpern bei Biege- Scherbeanspruchung This European Standard was approved by CEN on 23 September 2007 and includes Amendment 1 approved by CEN on 4 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa
9、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,
10、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, C
11、yprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION
12、 COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15416-3:2007+A1:2010: E EN 15416-3:2007+A1:2010 (E) 2 Contents
13、 Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Principle 5 5 Apparatus .5 5.1 Test jig 5 5.2 Climate chamber 6 5.3 Measuring gauge .6 6 Preparation of test samples 6 7 Test procedure, evaluation and expression of results 8 7.1 Test procedure .8 7.2 Evaluation and ex
14、pression of results 9 8 Test report . 10 BS EN 15416-3:2007+A1:2010 EN 15416-3:2007+A1:2010 (E) 3 Foreword This document (EN 15416-3:2007+A1:2010) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the sta
15、tus of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2010, and conflicting national standards shall be withdrawn at the latest by August 2010. Attention is drawn to the possibility that some of the elements of this document may be the subj
16、ect of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-01-04. This document supersedes EN 15416-3:2007. The start and finish of text introduced or altered by amendment is indica
17、ted in the text by tags !“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greec
18、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Safety statement Persons using this document should be familiar with the normal laboratory practice, if applic
19、able. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. !Environmental statement It is understood th
20、at some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard shall take c
21、are to carry out an appropriate disposal of the wastes, according to local regulation.“ BS EN 15416-3:2007+A1:2010 EN 15416-3:2007+A1:2010 (E) 4 1 Scope This European standard specifies a method for determining the creep deformation of bonded specimens loaded in bending shear. It is applicable to ad
22、hesives used in load-bearing timber structures. It is suitable for the following applications: a) for assessing the compliance of adhesives to !EN 15425“ Adhesives, One component polyurethane, for load bearing timber structures - Classification and performance requirements; b) for assessing the suit
23、ability and quality of adhesives for load-bearing timber structures. This test is intended primarily to obtain performance data for the classification of adhesives for load bearing timber structures according to their suitability for use in defined climatic environments. This method is not intended
24、to provide numerical design data and does not necessarily represent the performance of the bonded member in service. It is not applicable for assessing the suitability of adhesives for the manufacture of wood- based panels 2 Normative references The following referenced documents are indispensable f
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15416-3-2007 负荷轴承木结构用粘结剂.试验方法.带弯曲剪切载荷的试样在循环气候条件 15416 2007 负荷 轴承 木结构 粘结 试验 方法 弯曲 剪切 载荷 试样 循环 气候
链接地址:https://www.31doc.com/p-3647043.html