BS EN 288-5-1995 金属材料焊接工艺规范和认可 第5部分:使用已认可焊条的电弧焊的认可.pdf
《BS EN 288-5-1995 金属材料焊接工艺规范和认可 第5部分:使用已认可焊条的电弧焊的认可.pdf》由会员分享,可在线阅读,更多相关《BS EN 288-5-1995 金属材料焊接工艺规范和认可 第5部分:使用已认可焊条的电弧焊的认可.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 288-5: 1995 Specification and approval of welding procedures for metallic materials Part 5: Approval by using approved welding consumables for arc welding The European Standard EN 288-5:1994 has the status of a British Standard UDC 621.791.75:669:621.791.04:658.562 BS EN 288-5
2、:1995 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 February 1995 BSI 12-1998 The following BSI references relate to the work on this standard: Committee reference
3、WEE/36 Draft for comment 92/82570 DC ISBN 0 580 23694 3 Cooperating organizations The European Committee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the following countries: AustriaOesterreichisches Normung
4、sinstitut BelgiumInstitut belge de normalisation DenmarkDansk Standard FinlandSuomen Standardisoimisliito, r.y. FranceAssociation franaise de normalisation GermanyDeutsches Institut fr Normung e.V. GreeceHellenic Organization for Standardization IcelandTechnological Institute of Iceland IrelandNatio
5、nal Standards Authority of Ireland ItalyEnte Nazionale Italiano di Unificazione LuxembourgInspection du Travail et des Mines NetherlandsNederlands Normalisatie-instituut NorwayNorges Standardiseringsforbund PortugalInstituto Portugus da Qualidade SpainAsociacin Espaola de Normalizacin y Certificacin
6、 SwedenStandardiseringskommissionen i Sverige SwitzerlandAssociation suisse de normalisation United KingdomBritish Standards Institution Amendments issued since publication Amd. No.Date Comments BS EN 288-5:1995 BSI 1998i Contents Page Cooperating organizationsInside front cover National forewordii
7、Foreword2 Text of EN 288-53 National annex NA (informative) Committees responsible6 National annex NB (informative) Cross-referencesInside back cover BS EN 288-5:1995 ii BSI 1998 National foreword This British Standard has been prepared under the direction of the Engineering Sector Board and is the
8、English language version of EN 288 Specification and approval of welding procedures for metallic materials Part 5: Approval by using approved welding consumables for arc welding, published by the European Committee for Standardization (CEN). EN 288-5 was produced as a result of international discuss
9、ions in which the United Kingdom took an active part. There has previously been no direct British Standard equivalent to this standard. It is assumed that the execution of the provisions of this document is entrusted to suitably qualified and experienced persons. A British Standard does not purport
10、to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover
11、, pages i and ii, the EN title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCH
12、E NORM EN 288-5 August 1994 UDC621.791.75:669:621.791.04:658.562 Descriptors: Welding, arc welding, metals, procedure, qualification English version Specification and approval of welding procedures for metallic materials Part 5: Approval by using approved welding consumables for arc welding Descript
13、if et qualification dun mode opratoire de soudage pour les matriaux mtalliques Partie 5: Qualification par utilisation de produits consommables de soudage agrs pour le soudage larc Anforderung und Anerkennung von Schweiverfahren fr metallische Werkstoffe Teil 5: Anerkennung durch Einsatz anerkannter
14、 Schweizustze fr das Lichtbogenschweien This European Standard was approved by CEN on 1994-08-17. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to
15、-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under
16、the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherland
17、s, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1994 Copyright reserved to CEN members Ref. No. EN 288-5:1994 E EN 288
18、-5:1994 BSI 1998 2 Foreword This European Standard has been prepared by the Technical Committee CEN/TC 121, Welding, the secretariat of which is held by DS. This standard consists of the following parts: Part 1: General rules for fusion welding; Part 2: Welding procedure specification for arc weldin
19、g; Part 3: Welding procedure tests for the arc welding of steels; Part 4: Welding procedure tests for the arc welding of aluminum and its alloys; Part 5: Approval by using approved welding consumables for arc welding; Part 6: Approval related to previous experience; Part 7: Approval by a standard we
20、lding procedure for arc welding; Part 8: Approval by a pre-production welding test. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 1995, and conflicting national standards shall be withd
21、rawn at the latest by February 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Swede
22、n, Switzerland and United Kingdom. Contents Page Foreword2 0Introduction3 1Scope3 2Normative references3 3Definitions4 4Preliminary welding procedure specifications (pWPS)4 5Approval of the welding procedure4 6Range of approval4 6.1General4 6.2Related to the manufacturer4 6.3Related to the material4
23、 6.4Common to all welding processes5 6.5Specific to each welding process5 7Validity5 8Documentation5 Table 1 Applicable welding processes3 Table 2 Applicable groups of materials4 EN 288-5:1994 BSI 19983 0 Introduction In EN 288-1, one of the methods of welding procedure approval is by using approved
24、 welding consumables. 1 Scope This standard simplifies the approval of welding procedures especially for repetitive operations. The standard gives the necessary information to explain the requirements referenced in EN 288-1 about the approval of welding procedures using approved consumables. In addi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 288-5-1995 金属材料焊接工艺规范和认可 第5部分:使用已认可焊条的电弧焊的认可 288 1995 金属材料 焊接 工艺 规范 认可 部分 使用 焊条 电弧焊
链接地址:https://www.31doc.com/p-3647104.html