BS EN 60384-14-2-2004 电子设备用固定电容器.空白详细规范.抑制电磁干扰和电源网络连接用固定电容器.安全试验专用2.pdf
《BS EN 60384-14-2-2004 电子设备用固定电容器.空白详细规范.抑制电磁干扰和电源网络连接用固定电容器.安全试验专用2.pdf》由会员分享,可在线阅读,更多相关《BS EN 60384-14-2-2004 电子设备用固定电容器.空白详细规范.抑制电磁干扰和电源网络连接用固定电容器.安全试验专用2.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60384-14-2:2004 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Safety tests only The European Standard EN 60384-14-2:2004 has the status of
2、a British Standard ICS 31.060.10 ? BS EN 60384-14-2:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 14 January 2005 BSI 14 January 2005 ISBN 0 580 45236 0 National foreword This British Standard is the official English language version o
3、f EN 60384-14-2:2004. It is identical with IEC 60384-14-2:2004. This standard together with BS EN 60384-14-3:2004 supersedes BS EN 132421:1997 which will be withdrawn on 2007-11-01. The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for ele
4、ctronic equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Ca
5、talogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its
6、correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests
7、 informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed in this document indicates when the d
8、ocument was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD EN 60384-14-2 NORME EUROPENNE EUROPISCHE NORM November 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elek
9、trotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60384-14-2:2004 E ICS 31.060.10 Partially supersedes EN 132421:1997 English version Fixed capaci
10、tors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Safety tests only (IEC 60384-14-2:2004) Condensateurs fixes utiliss dans les quipements lectroniques Partie 14-2: Spcification p
11、articulire cadre Condensateurs fixes dantiparasitage et raccordement lalimentation Essais de scurit seulement (CEI 60384-14-2:2004) Festkondensatoren zur Verwendung in Gerten der Elektronik Teil 14-2: Vordruck fr Bauartspezifikation Kondensatoren zur Unterdrckung elektromagnetischer Strungen, geeign
12、et fr Netzbetrieb Nur Sicherheitsprfungen (IEC 60384-14-2:2004) This European Standard was approved by CENELEC on 2004-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa
13、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other
14、 language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Es
15、tonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 68304-41-22:400 - - 2 Foreword The text of document 40/1463/FDIS, future editi
16、on 1 of IEC 60384-14-2, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-14-2 on 2004-11-01. This European Standard, together with EN 60384-14-3:2004, supersedes EN 132421:1997. This Europ
17、ean Standard should be read in conjunction with EN 60384-1:2001. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-08-01 latest date by which the national standards conflic
18、ting with the EN have to be withdrawn (dow) 2007-11-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60384-14-2:2004 was approved by CENELEC as a European Standard without any modification. _ Page 2 EN 60384142:2004 w w w . b z f x w . c o m 2 06
19、3-4814-2 CEI :0240(E) INTRODUCTION Blank detail specification This blank detail specification forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 60384-14, requires a declaration of design for parameters relevant
20、 to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design. In comparison with IEC 60384-14-1 which provides quality conformance and safety tests, this specification is restricted to safety tests
21、 only. The use of IEC 60384-14-1 may be more appropriate for components manufactured in mass production, whereas the employment of this specification may be necessary in those cases where approval and requalification tests contribute considerably to the costs of the product. A blank detail specifica
22、tion is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications, nor should they
23、so be described. In the preparation of detail specifications the content of 1.4 of the sectional specification should be taken into account. Identification of the detail specification The first page of the detail specification should have the layout recommended on the next page of this blank detail
24、specification. The numbers between square brackets correspond to the following information which should be inserted at the position indicated: 1 The “International Electrotechnical Commission“ or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60384-14-2-2004 电子设备用固定电容器.空白详细规范.抑制电磁干扰和电源网络连接用固定电容器.安全试验专用2 60384 14 2004 电子 备用 固定 电容器 空白 详细
链接地址:https://www.31doc.com/p-3647728.html