BS EN 60352-7-2002 Solderless connections — Part 7 Spring clamp connections — General requirements, test methods and practical guidance1.pdf
《BS EN 60352-7-2002 Solderless connections — Part 7 Spring clamp connections — General requirements, test methods and practical guidance1.pdf》由会员分享,可在线阅读,更多相关《BS EN 60352-7-2002 Solderless connections — Part 7 Spring clamp connections — General requirements, test methods and practical guidance1.pdf(30页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60352-7:2002 Incorporating Corrigendum No. 1 Solderless connections Part 7: Spring clamp connections General requirements, test methods and practical guidance The European Standard EN 60352-7:2002 has the status of a British Standard ICS 31.220.10 ? Licensed Copy: :FULLNAME, :
2、 DATE, Uncontrolled Copy, (c) BSI BS EN 60352-7:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 6 November 2002 BSI 13 November 2002
3、ISBN 0 580 40687 3 National foreword This British Standard is the official English language version of EN 60352-7:2002. It is identical with IEC 60352-7:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures f
4、or electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or Europ
5、ean publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include al
6、l the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries o
7、n the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 27 and a back cover.
8、The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 14239 Corrigendum No. 1 13 November 2002Corrections to inside front cover and shoulder headings Licensed Copy: :FULLNAME, : DATE, Uncontrolled Copy
9、, (c) BSI EUROPEAN STANDARD EN 60352-7 NORME EUROPENNE EUROPISCHE NORM October 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Bruss
10、els 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60352-7:2002 E ICS 31.220.10 English version Solderless connections Part 7: Spring clamp connections - General requirements, test methods and practical guidance (IEC 60352-7
11、:2002) Connexions sans soudure Partie 7: Connexions ressort - Rgles gnrales, mthodes dessai et guide pratique (CEI 60352-7:2002) Ltfreie Verbindungen Teil 7: Federklemmverbindungen - Allgemeine Anforderungen, Prfverfahren und Anwendungshinweise (IEC 60352-7:2002) This European Standard was approved
12、by CENELEC on 2002-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
13、standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and
14、 notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Po
15、rtugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: :FULLNAME, : DATE, Uncontrolled Copy, (c) BSI Foreword The text of document 48B/1228/FDIS, future edition 1 of IEC 60352-7, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical struct
16、ures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60352-7 on 2002-10-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsemen
17、t (dop) 2003-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-10-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text
18、 of the International Standard IEC 60352-7:2002 was approved by CENELEC as a European Standard without any modification. _ 2 egaP 2002:725306 OSI NE Page 2 EN 603527:2002 Licensed Copy: :FULLNAME, : DATE, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m -253067 ? (2002:CEI)E 3 CONTENTS INTRODUCT
19、ION.4 1Scope and object5 2Normative references5 3Definitions 6 4Requirements .8 4.1Workmanship 8 4.2Tools.8 4.3Spring-clamp terminations .8 4.4Design features .8 4.5Wires 8 4.6Spring-clamp connections9 5Tests9 5.1Testing9 5.2Test methods and test requirements 10 5.3Test schedules 17 6Practical guida
20、nce 23 6.1Current-carrying capacity.23 6.2Tool information.23 6.3Termination information.23 6.4Wire information24 6.5Connection information26 Figure 1 Examples of spring-clamp connections .7 Figure 2 Example of a spring-clamp terminal 7 Figure 3 Information for the wire deflection test 13 Figure 4 T
21、est arrangement, vibration 14 Figure 5 Test arrangement, current method15 Figure 6 Basic test schedule (see 5.3.2).21 Figure 7 Full test schedule (see 5.3.3)22 Figure 8 Correctly stripped wire25 Figure 9 Examples of stripping faults25 Table 1 Values of tensile strength.11 Table 2 Values for wire def
22、lection test 12 Table 3 Vibration, test severities.14 Table 4 Rated current of the wires, initial and final contact resistance.16 Table 5 Number of specimens required 18 Annex ZA (normative) Normative references to international publications with their corresponding European publications 27 3 egaP 2
23、002:725306 OSI NE Page 3 EN 603527:2002 Licensed Copy: :FULLNAME, : DATE, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m 4 -253067 ? (2002:CEI)E INTRODUCTION This part of IEC 60352 includes requirements, tests and practical guidance information. Two test schedules are provided. a) The basic te
24、st schedule applies to spring-clamp connections which conform to all require- ments of clause 4. These requirements are derived from experience with successful applications of such spring-clamp connections. b) The full test schedule applies to spring-clamp connections which do not fully conform to a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60352-7-2002 Solderless connections Part Spring clamp General requirements test methods and practical 60352
链接地址:https://www.31doc.com/p-3647735.html