BS EN 60745-2-18-2009 手持式电动工具.安全性.打包工具的特殊要求.pdf
《BS EN 60745-2-18-2009 手持式电动工具.安全性.打包工具的特殊要求.pdf》由会员分享,可在线阅读,更多相关《BS EN 60745-2-18-2009 手持式电动工具.安全性.打包工具的特殊要求.pdf(14页珍藏版)》请在三一文库上搜索。
1、- - - Hand-held motor-operated electric tools Safety Part 2-18: Particular requirements for strapping tools BS EN 60745-2-18:2009 National foreword This British Standard is the UK implementation of EN 60745-2-18:2009. It was derived by CENELEC from IEC 60745-2-18:2003 . It supersedes BS EN 60745-2-1
2、8:2004+A1:2008, which will be withdrawn on 1 April 2011. The CENELEC common modifications have been implemented at the appro- priate places in the text and are indicated by tags (e.g.). The UK participation in its preparation was entrusted to Technical Committee CPL/116, Portable motor-operated tool
3、s. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 64799 4 ICS 25.140.20 Compliance w
4、ith a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2010 Amendmentscorrigenda issued since publication Amd. No. Date Text affected BRITISH STANDARDBS EN 60745-2-18:200
5、9 - - - - - - EUROPEAN STANDARD EN 60745-2-18 NORME EUROPENNE EUROPISCHE NORM September 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 100
6、0 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60745-2-18:2009 E English version Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modi
7、fied + A1:2008) Outils lectroportatifs moteur - Scurit - Partie 2-18: Rgles particulires pour les outils de cerclage (CEI 60745-2-18:2003, modifie + A1:2008) Handgefhrte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-18: Besondere Anforderungen fr Umreifungswerkzeuge (IEC 60745-2-18:2003, mo
8、difiziert + A1:2008) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
9、 and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the res
10、ponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germa
11、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. ICS 25.140.20 Supersedes EN 60745-2-18:2004 + corr. Dec.2005 + A1:2008 + A11:2007 BS EN 60745
12、-2-18:2009 Foreword The text of the International Standard IEC 60745-2-18:2003, prepared by SC 61F (transformed into IEC TC 116, Safety of hand-held motor-operated electric tools), together with the common modifications prepared by the Technical Committee CENELEC TC 61F (transformed into TC 116) was
13、 submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60745-2-18 on 2004-03-01. A draft amendment (prAA) was prepared to align Subclause 6.2 with the new Subclause 6.2 in EN 60745-1. Moreover, vibration values determined with the new 6.2 are complying with the requirements
14、of the Physical Agents Directive Vibration 2002/44/EC. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment A11 to EN 60745-2-18:2004 on 2007-06-01. The text of document 61F/677/CDV, future amendment 1 to IEC 60745-2-18:2003 was submitted to
15、 the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as amendment A1 to EN 60745-2-18:2004 on 2008-04-01. A further draft amendment (prAB), extending Annex ZZ to include the new MD 2006/42/EC, was submitted to the formal vote. The combined texts were approved by CENELEC
16、as a new edition of EN 60745-2-18 on 2009-07-01. This European Standard supersedes EN 60745-2-18:2004 + corrigendum December 2005 + A11:2007 + A1:2008. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard
17、 or by endorsement (dop) 2010-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-04-01 This standard is divided into two parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of thi
18、s standard referred to simply as tools) which could come within the scope of this standard; Part 2: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Eu
19、ropean Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and supports the essential requirements of EC Directive 98/37/EC (Machinery Directive), amended by EC Directive 98/79/EC, and of EC Directive 2006/42/EC. See Annexes
20、ZZA and ZZB. Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements and other EC Directives can be applicable to the products falling within the scope o
21、f this standard. This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2. BS EN 60745-2-18:2009 EN 60745-2-18:2009 (E) - 3 - This Part 2-18 is to be used in conjunction with EN 60745-1:2009. When this standard states “addition“, “modification“ or “replacement“, the releva
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60745-2-18-2009 手持式电动工具.安全性.打包工具的特殊要求 60745 18 2009 手持 电动工具 安全性 打包 工具 特殊要求
链接地址:https://www.31doc.com/p-3647829.html