BS EN 61076-3-114-2009 电子设备用连接器的产品要求.矩形连接器,工业环境用频率低于600MHz的8通道屏蔽和非屏蔽连接器的防护箱.pdf
《BS EN 61076-3-114-2009 电子设备用连接器的产品要求.矩形连接器,工业环境用频率低于600MHz的8通道屏蔽和非屏蔽连接器的防护箱.pdf》由会员分享,可在线阅读,更多相关《BS EN 61076-3-114-2009 电子设备用连接器的产品要求.矩形连接器,工业环境用频率低于600MHz的8通道屏蔽和非屏蔽连接器的防护箱.pdf(28页珍藏版)》请在三一文库上搜索。
1、- - - - Connectors for electronic equipment Product requirements Part 3-114: Rectangular connectors Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interf
2、ace Variant 11 related to IEC 61076-3-106 Bayonet coupling type BS EN 61076-3-114:2009 National foreword This British Standard is the UK implementation of EN 61076-3-114:2009. It is identical to IEC 61076-3-114:2009. The UK participation in its preparation was entrusted to Technical Committee EPL/48
3、, Electromechanical components and mechanical structures for elec- tronic equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i
4、ts correct application. BSI 2009 ISBN 978 0 580 56741 4 ICS 31.220.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2009 Amendments issued since
5、publication Amd. No. Date Text affected BRITISH STANDARDBS EN 61076-3-114:2009 EUROPEAN STANDARD EN 61076-3-114 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrote
6、chnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-3-114:2009 E ICS 31.220.10 English version Connectors for electronic equipment - Product requirem
7、ents - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet co
8、upling type (IEC 61076-3-114:2009) Connecteurs pour quipement lectroniques - Exigences de produits - Partie 3-114: Connecteurs rectangulaires - Spcification particulire pour botiers de protection utiliss avec des connecteurs blinds et non blinds 8 voies pour des frquences infrieures ou gales 600 MHz
9、 dans des environnements industriels incorporant linterface srie CEI 60603-7 - Variante 11 lie la CEI 61076-3-106 - Type daccouplement baonnette (CEI 61076-3-114:2009) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 3-114: Rechteckige Steckverbinder - Bauartspezifikation
10、fr Schutzgehuse fr die Anwendung mit 8-poligen geschirmten und ungeschirmten Steckverbindern fr Frequenzen bis 600 MHz fr industrielle Umgebungen zur Aufnahme der Schnittstelle der Reihe IEC 60603-7 - Ausfhrung 11 zu IEC 61076-3-106 - Bajonettausfhrung (IEC 61076-3-114:2009) This European Standard w
11、as approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning su
12、ch national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own
13、language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
14、 Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61076-3-114:2009 EN 61076-3-114:2009 - 2 - Foreword The text of document 48B/1995/FDIS, future edition 1 of IEC 61076-3-114, prepare
15、d by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-3-114 on 2009-07-01. The following dates were fixed: latest date by which the EN has to be im
16、plemented at national level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Internati
17、onal Standard IEC 61076-3-114:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 61076-3-114:2009 - 3 - EN 61076-3-114:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenc
18、ed documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modi
19、fications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-581 2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment - - IEC 60068-1 -1) Environmental testing - Part 1: General and guidance E
20、N 60068-1 19942) IEC 60068-2-14 -1) Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 20092) IEC 60068-2-30 -1) Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 20052) IEC 60512-1 -1) Connectors for electroni
21、c equipment - Tests and measurements - Part 1: General EN 60512-1 20012) IEC 60512-1-100 -1) Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications EN 60512-1-100 20062) IEC 60529 -1) Degrees of protection provided by enclosures (IP Code) EN 6052
22、9 + corr. May 19912) 1993 IEC 60603-7 -1) Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors - - IEC 60603-7-2 -1) Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, f
23、or data transmissions with frequencies up to 100 MHz - - IEC 60603-7-3 -1) Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz - - IEC 60603-7-4 -1) Connectors for electronic equipme
24、nt - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz EN 60603-7-4 20052) 1) Undated reference. 2) Valid edition at date of issue. BS EN 61076-3-114:2009 EN 61076-3-114:2009 - 4 - Publication Year Title EN/HD Year
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61076-3-114-2009 电子设备用连接器的产品要求.矩形连接器 工业环境用频率低于600MHz的8通道屏蔽和非屏蔽连接器的防护箱 61076 114 2009 电子 备用 连接器
链接地址:https://www.31doc.com/p-3647861.html