BS EN 61534-22-2009 Powertrack systems — Part 22 Particular requirements for powertrack systems intended for on floor or under floor installation.pdf
《BS EN 61534-22-2009 Powertrack systems — Part 22 Particular requirements for powertrack systems intended for on floor or under floor installation.pdf》由会员分享,可在线阅读,更多相关《BS EN 61534-22-2009 Powertrack systems — Part 22 Particular requirements for powertrack systems intended for on floor or under floor installation.pdf(24页珍藏版)》请在三一文库上搜索。
1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI British Standards WB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1 Powertrack systems ? Part 22: Particular requirements for powertrack systems intended for on floor or under f
2、loor installation BS EN 61534-22:2009 National foreword This British Standard is the UK implementation of EN 61534-22:2009. It is identical to IEC 61534-22:2009. The UK participation in its preparation was entrusted to Technical Committee PEL/213, Cable management. A list of organizations represente
3、d on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2009 ISBN 978 0 580 57041 4 ICS 29.060.10; 29.120.20 Compliance with a British Standard can
4、not confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 3 2009 Amendments issued since publication Amd. No. Date Text affected BRITISH STANDARDBS EN 61534-22:2009 June0 EUROPEAN STANDARD EN 61534-22 NORME E
5、UROPENNE EUROPISCHE NORM April 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in a
6、ny form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61534-22:2009 E ICS 29.060.10; 29.120.20 English version Powertrack systems - Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation (IEC 61534-22:2009) Systmes de conducte
7、urs prfabriqus - Partie 22: Exigences particulires pour les systmes de conducteurs prfabriqus destins au montage sur le sol ou sous le sol (CEI 61534-22:2009) Stromschienensysteme - Teil 22: Besondere Anforderungen fr Stromschienensysteme fr Fubodeninstallationen (IEC 61534-22:2009) This European St
8、andard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conce
9、rning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into
10、its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland
11、, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61534-22:2009 EN 61534-22:2009 - 3 - Foreword The text of document 23A/580/FDIS, future edition 1 of IEC 61534-22, prepared
12、by SC 23A, Cable management systems, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61534-22 on 2009-04-01. This standard is to be used in conjunction with EN 61534-1:2003, Powertrack systems Part 1: General requirements. The cl
13、auses of the particular requirements of this Part 22 add to or modify the corresponding clauses in Part 1. Where the text of Part 22 indicates an “addition” or a “deletion” or a “replacement” of the relevant requirement, test specification or explanation of Part 1, these changes are made to the rele
14、vant text of Part 1, which then becomes part of the standard. Where no change is necessary, the words: “This clause of Part 1 is applicable” are used in Part 22. Subclauses, tables and figures which are in addition to those in Part 1 are numbered starting with 101. The following dates were fixed: la
15、test date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-04-01 _ Endorsement notice The text of the Interna
16、tional Standard IEC 61534-22:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 61534-22:2009 w w w . b z f x w . c o m 4 61534-22 IEC:2009 CONTENTS 1 Scope.5 2 Normative references .5 3 Terms and definitions .5 4 General requirements.6 5 General notes on tests .6
17、6 Ratings.6 7 Classification6 8 Marking and documentation7 9 Construction.7 10 Clearances, creepage distances and solid insulation8 11 Protection against electric shock 8 12 Terminals and terminations 8 13 Screws, current-carrying parts and connections8 14 Mechanical strength .8 15 Insulation resist
18、ance test and dielectric strength test13 16 Normal operation13 17 Temperature rise13 18 Resistance to heat13 19 Fire hazard.14 20 External influences.14 21 Electromagnetic compatibility .14 Annex AA (informative) Illustrations of under floor and on floor installations 19 Figure 101 External load tes
19、t .15 Figure 102 Traffic load test for flush floor service units applied to a small surface area16 Figure 103 Traffic load test for flush floor service units applied to a large surface area17 Figure 104 Test arrangement for fixing apparatus mounting device according to 14.101.1 .18 Figure AA.1 Illus
20、trations of under floor installations .19 Figure AA.2 Example of installation on floor.20 BS EN 61534-22:2009 w w w . b z f x w . c o m 61534-22 IEC:2009 5 POWERTRACK SYSTEMS Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation 1 Scope This clause
21、 of Part 1 is applicable except as follows: This standard applies to PT systems which are intended to be mounted on, or under the floor level and floor service units which are mounted on the floor, under the floor or flush with the floor. NOTE 1 Types and applications are shown in Figures AA.1a, AA.
22、1b and AA.2 NOTE 2 Flush floor PT systems, with the exception of flush floor service units, are not covered by this standard. 2 Normative references This clause of Part 1 is applicable. 3 Terms and definitions This clause of Part 1 is applicable except as follows: Additional terms and definitions: 3
23、.101 under floor PT system PT system whose components, except flush floor service units, are intended for installation beneath the finished floor and in normal use are not exposed to traffic loads NOTE Examples are shown in Figures AA.1a and AA.1b 3.102 on floor PT system PT system whose components
24、are mounted on the floor surface NOTE An example is shown in Figure AA.2. 3.103 finished floor floor which carries the traffic load and which may be made of concrete, wood, or the like and which may or may not be completed with floor covering material such as carpet, tile, paint, parquet or similar
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61534-22-2009 Powertrack systems Part 22 Particular requirements for intended on floor or under 61534
链接地址:https://www.31doc.com/p-3647936.html