BS EN 61310-3-1999 Safety of machinery-Indication, marking and actuation- Part 3 Requirements for the location and operation of actuators.pdf
《BS EN 61310-3-1999 Safety of machinery-Indication, marking and actuation- Part 3 Requirements for the location and operation of actuators.pdf》由会员分享,可在线阅读,更多相关《BS EN 61310-3-1999 Safety of machinery-Indication, marking and actuation- Part 3 Requirements for the location and operation of actuators.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61310-3:1999 IEC 61310-3:1999 Safety of Machinery Indication, marking and actuation Part 3: Requirements for the location and operation of actuators The European Standard EN 61310-3:1999 has the status of a British Standard ICS 13.110; 29.020 Licensed Copy: Institute Of Techno
2、logy Tallaght, Institute of Technology, Sat May 12 17:22:04 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 61310-3:1999 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes i
3、nto effect on 15 June 1999 BSI 04-2000 ISBN 0 580 32557 1 National foreword This British Standard is the English language version of EN 61310-3:1999. It is identical with IEC 61310-3:1999. The UK participation in its preparation was entrusted to Technical Committee GEL/44, Safety of machinery Electr
4、otechnical Aspects, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developm
5、ents and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of t
6、ime during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with thei
7、r corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electr
8、onic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This doc
9、ument comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 10, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside fro
10、nt cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat May 12 17:22:04 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 61310-3:1999 BSI 04-2000i Contents Page National forewordInside front cover Foreword2 Text
11、 of EN 61310-33 Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat May 12 17:22:04 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat May 12 17:22:04 GMT+00:00 2007, Uncontrolled Copy, (c) BSI w
12、 w w . b z f x w . c o m EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61310-3 April 1999 ICS 13.110; 29.120.60 English version Safety of machinery Indication, marking and actuation Part 3: Requirements for the location and operation of actuators (IEC 61310-3:1999) Scurit des machines Indicat
13、ion, marquage et manoeuvre Partie 3: Spcifications sur la position et le fonctionnement des organes de service (CEI 61310-3:1999) Sicherheit von Maschinen Anzeigen, Kennzeichen und Bedienen Teil 3: Anforderungen an die Anordnung und den Betrieb von Bedienteilen (Stellteilen) (IEC 61310-3:1999) This
14、European Standard was approved by CENELEC on 1999-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer
15、ences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC m
16、ember into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherla
17、nds, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC
18、 All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61310-3:1999 E Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat May 12 17:22:04 GMT+00:00 2007, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 61310-3:19
19、99 BSI 04-2000 2 Foreword The text of this European Standard has been developed by IEC TC 44, Safety of machinery Electrotechnical aspects, from the document prepared as prEN 50099-3 by the Technical Committee CENELEC TC 44X in collaboration with the Technical Committee CEN TC 114. It was submitted
20、to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61310-3 on 1999-04-01. The following dates were fixed: This standard has the status of a horizontal standard (type B standard in CEN as defined in subclause 3.2 of EN 414:1992) and may be used, e.g. as a reference standard, by techni
21、cal committees in CEN and CENELEC preparing product family or dedicated product standards (type C standards in CEN as defined in subclause 3.1 of EN 414:1992) for machines. The requirements of this standard can also be applied by suppliers for machines for which no product family or dedicated produc
22、t standard exists. Where a product family or dedicated product standard exists, its requirements take precedence. Machinery designed and constructed in accordance with the safety requirements of this European Standard will be presumed to conform to the corresponding essential safety requirements (ES
23、Rs) of the Machinery Directive 89/392/EEC and associated EFTA Regulations. The extent to which the ESRs are covered is indicated in the Scope of this standard. This European Standard also fulfils the requirements of the Low Voltage Directive 73/23/EEC. Endorsement notice The text of the Internationa
24、l Standard IEC 61310-3:1999 was approved by CENELEC as a European Standard without any modification. In the official version, for Annex B, Bibliography, the following note has to be added for the standard indicated: Contents Page Foreword2 1Scope3 2Normative references3 3Definitions3 4General requir
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61310-3-1999 Safety of machinery-Indication marking and actuation- Part Requirements for the location 61310
链接地址:https://www.31doc.com/p-3647947.html