BS EN 61800-7-1-2008 可调速电力传动系统.通用接口和电力驱动系统断面的使用.接口定义.pdf
《BS EN 61800-7-1-2008 可调速电力传动系统.通用接口和电力驱动系统断面的使用.接口定义.pdf》由会员分享,可在线阅读,更多相关《BS EN 61800-7-1-2008 可调速电力传动系统.通用接口和电力驱动系统断面的使用.接口定义.pdf(104页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61800-7-1:2008 Adjustable speed electrical power drive systems Part 7-1: Generic interface and use of profiles for power drive systems Interface definition ICS 29.200; 35.100.05 BS EN 61800-7-1:2008 This British Standard was published under the authority of the Standards Polic
2、y and Strategy Committee on 30 September 2008 BSI 2008 ISBN 978 0 580 56071 2 National foreword This British Standard is the UK implementation of EN 61800-7-1:2008. It is identical to IEC 61800-7-1:2007. The UK participation in its preparation was entrusted to Technical Committee PEL/22, Power elect
3、ronics. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immu
4、nity from legal obligations. Amendments/corrigenda issued since publication DateComments EUROPEAN STANDARD EN 61800-7-1 NORME EUROPENNE EUROPISCHE NORM April 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr El
5、ektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61800-7-1:2008 E ICS 29.200; 35.100.05 Partially supersedes EN 61491:1998 English version Adju
6、stable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition (IEC 61800-7-1:2007) Entranements lectriques de puissance vitesse variable - Partie 7-1: Interface et utilisation gnriques de profils pour les entranements lec
7、triques de puissance - Dfinition de linterface (CEI 61800-7-1:2007) Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 7-1: Generisches Interface und Nutzung von Profilen fr Leistungsantriebssysteme (PDS) - Schnittstellendefinition (IEC 61800-7-1:2007) This European Standard was
8、approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such
9、national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lan
10、guage and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La
11、tvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 22G/183/FDIS, future edition 1 of IEC 61800-7-1, prepared by SC 22G, Adjustable speed electric drive systems in
12、corporating semiconductor power converters, of IEC TC 22, Power electronic systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61800-7-1 on 2008-02-01. This European Standard, together with its companion parts for Profile type 4 (SERCOS), partially
13、 replaces EN 61491:1998 which is at present being revised (to be issued as a Technical Report). The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-11-01 latest date by which
14、 the national standards conflicting with the EN have to be withdrawn (dow) 2011-02-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61800-7-1:2007 was approved by CENELEC as a European Standard without any modification. _ BS EN 61800-7-1:2008 2 C
15、ONTENTS INTRODUCTION. 1 Scope.1 2 Normative references .1 3 Terms, definitions and abbreviated terms .1 3.1 Preamble.1 3.2 General definitions 1 3.3 Specific definitions 1 3.3.1 Common definitions.1 3.3.2 Definitions for Annex A1 3.3.3 Definitions for Annex B1 3.3.4 Definitions for Annex C1 3.3.5 De
16、finitions for Annex D 3.4 Abbreviated terms .2 3.4.1 Common abbreviations 2 3.4.2 Abbreviations for Annex A .2 3.4.3 Abbreviations for Annex B .2 3.4.4 Abbreviations for Annex C .2 3.4.5 Abbreviations for Annex D .2 3.5 Conventions 2 4 General architecture.2 4.1 Generic PDS interface.2 4.2 Typical s
17、tructure of automation systems2 4.3 Structure of the logical PDS 2 4.4 Use cases of the PDS . 4.4.1 General . 4.4.2 Use case engineering3 4.4.3 Use case operation-control3 5 Functional elements .3 5.1 Device identification FE.3 5.1.1 General .3 5.1.2 Parameters3 5.2 Device Control FE .3 5.2.1 Genera
18、l .3 5.2.2 I/O data .3 5.2.3 States3 5.2.4 Parameters3 5.3 Communication FE 5.3.1 General .3 5.3.2 I/O data .3 5.3.3 States3 5.3.4 Parameters3 5.4 Basic drive FE.3 5.4.1 General .3 5.4.2 I/O data .3 BS EN 61800-7-1:2008 3 5.4.3 States 5.4.4 Parameters4 5.5 Optional application FE .4 6 Application mo
19、des 4 6.1 General .4 6.2 Torque control.4 6.3 Velocity control4 6.4 Position control .4 7 Profile specific extensions 4 8 Structure for annexes .4 8.1 General .4 8.2 Structure of the annexes .4 Annex A (normative) Mapping to Profile CiA 402 drive and motion control . Annex B (normative) Mapping to p
20、rofile CIP Motion6 Annex C (normative) Mapping to profile PROFIdrive 7 Annex D (normative) Mapping to Profile SERCOS .8 Bibliography. Figure 1 Structure of IEC 61800-71 Figure 2 Definition of power drive system.2 Figure 3 Example of system structures for position-control applications.2 Figure 4 Exam
21、ples of system structures for velocity-control applications2 Figure 5 Examples of system structures for torque-control applications .2 Figure 6 Typical structure of automation systems (adapted from IEC/TR 62390)2 Figure 7 Structure of the PDS with functional elements2 Figure 8 Functional Elements (F
22、E) in the logical PDS Figure 9 Use case for the generic PDS interface3 Figure 10 The generic interface in the use case operation .3 Figure 11 Device control FE state-chart diagram3 Figure 12 Device control FE state transition table 3 Figure 13 Communication FE state-chart diagram Figure 14 Communica
23、tion FE state transition table 3 Figure 15 Optional communication FE state-chart diagram.3 Figure 16 Optional communication FE state transition table .3 Figure 17 Basic drive FE state-chart diagram. Figure 18 Basic drive FE state transition table . Figure 19 Optional basic drive FE state-chart diagr
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61800-7-1-2008 可调速电力传动系统.通用接口和电力驱动系统断面的使用.接口定义 61800 2008 调速 电力 传动系统 通用 接口 驱动 系统 断面 使用 定义
链接地址:https://www.31doc.com/p-3647954.html