BS EN 695-2005 厨房洗涤池.连接尺寸.pdf
《BS EN 695-2005 厨房洗涤池.连接尺寸.pdf》由会员分享,可在线阅读,更多相关《BS EN 695-2005 厨房洗涤池.连接尺寸.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN Kitchen sinks Connecting dimensions The European Standard EN 695:2005 has the status of a British Standard ICS 91.140.70; 97.040.99 695:2005 BS EN 695:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 December 200
2、5 BSI 13 December 2005 ISBN 0 580 47370 8 National foreword This British Standard is the official English language version of EN 695:2005. It supersedes BS EN 695:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/503, Sanitary appliances, which h
3、as the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the
4、 UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “Internation
5、al Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British
6、Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document
7、was last issued. Amendments issued since publication Amd. No. DateComments W - - - - - - - - - $-$ -A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - W W D - - w - - - - EN 695:2005 (E) 2 Contents Foreword 3 1 Scope.4 2 Normative references .4 3 Terms and definitions.4 4 Waste outl
8、et holes 4 5 Fitting area for tap holes 7 6 Overflow holes 9 Bibliography.12 EN 695:2005 (E) 3 Foreword This European Standard (EN 695:2005) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the s
9、tatus of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2006, and conflicting national standards shall be withdrawn at the latest by February 2006. This document supersedes EN 695:1997. According to the CEN/CENELEC Internal Regulations, t
10、he national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol
11、and, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 695:2005 (E) 4 1 Scope This European Standard specifies connecting dimensions for kitchen sinks used for domestic purposes, regardless of the material from which they are manufactured. NOTE 1 For the purposes of thi
12、s standard the term “domestic purposes“ includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. NOTE 2 The figures are given by way of example; other designs are possible. This European Standard does not apply to indus
13、trial kitchen sinks. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13
14、310:2003, Kitchen sinks Functional requirements and test methods 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 13310:2003 and the following apply. 3.1 integral overflow overflow arrangement which is a part of the kitchen sink formed during
15、its manufacture 4 Waste outlet holes The connecting dimensions for waste outlet holes shall comply with the requirements given in Table 1 except when the waste outlets are supplied by the manufacturer together with the kitchen sink. EN 695:2005 (E) 5 Table 1 Connecting dimensions for waste outlet ho
16、les (see Figures 1 and 2) Designation Symbol Value mm Reference diameter D3 a mm Remarks 3 2 52 70 For all kitchen sinks 1 0 60 70 For kitchen sinks made of stainless steel, enamelled steel and plastics materials 3 2 62 85 For kitchen sinks made of ceramics and plastics materials Diameter of waste o
17、utlet hole or punched grill D2 3 2 90 115 For all kitchen sinks 2 to 25 _ For kitchen sinks without integral overflow Distance between the reference diameter of the waste outlet and the underside of the waste outlet hole h2 45 to 65 _ For kitchen sinks made of ceramics with an integral overflow Dist
18、ance between the bottom of the bowl and the reference diameter of the waste outlet e 2 _ _ Waste outlet hole-sealing surface for the upper side S1b _ _ _ Waste outlet hole-sealing surface for the underside S2 3 _ _ a D3 is a reference diameter from which e and h2 are measured (see external flange di
19、ameter E in EN 274-1). b S1 is intended to provide proper sealing between the waste outlet and waste outlet hole. EN 695:2005 (E) 6 Key a) waste outlet hole for kitchen sinks made of stainless steel and enamelled steel b) waste outlet hole for kitchen sinks made of stainless steel c) waste outlet ho
20、le for kitchen sinks made of ceramics and plastics materials d) waste outlet hole for kitchen sinks made of plastics materials NOTE For explanation of symbols see Table 1. a The tolerance allowed for the planarity of the surface is 1. Figure 1 Shapes for waste outlet holes EN 695:2005 (E) 7 NOTE For
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 695-2005 厨房洗涤池.连接尺寸 695 2005 厨房 洗涤 连接 尺寸
链接地址:https://www.31doc.com/p-3648043.html