BS EN 706-1997 Agricultural machinery Vine shoot tipping machines - Safety.pdf
《BS EN 706-1997 Agricultural machinery Vine shoot tipping machines - Safety.pdf》由会员分享,可在线阅读,更多相关《BS EN 706-1997 Agricultural machinery Vine shoot tipping machines - Safety.pdf(20页珍藏版)》请在三一文库上搜索。
1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 706 : 1997 The Euro
2、pean Standard EN 706 : 1996 has the status of a British Standard ICS 65.060.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Agricultural machinery Vine shoot tipping machines Safety BS EN 706 : 1997 This British Standard, having been prepared under the direction of the Engi
3、neering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 February 1997 BSI 1997 The following BSI references relate to the work on this standard: Committee reference AGE/32 Draft for comment 92/74751 DC ISBN 0 580 26810 1 Amendments issued since publ
4、ication Amd. No.DateText affected Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee AGE/32, Agricultural implements and trailers, upon which the following bodies were represented: Agricultural and Allied Workers National Tr
5、ade Group Agricultural Engineers Association Department of Transport Fertilizer Manufacturers Association Ltd. Health and Safety Executive National Farmers Union Silsoe College, Cranfield Institute of Technology Co-opted member BS EN 706 : 1997 BSI 1997i Contents Page Committees responsibleInside fr
6、ont cover National forewordii Foreword2 Text of EN 7063 ii BSI 1997 BS EN 706 : 1997 National foreword This British Standard has been prepared by Technical Committee AGE/32 and is the English language version of EN 706 : 1996 Agricultural machinery Vine shoot tipping machines Safety, published by th
7、e European Committee for Standardization (CEN). EN 706 : 1996 was produced as a result of international discussions in which the United Kingdom took an active part. No current British Standard is superseded. Cross-references Publication referred toCorresponding British Standard EN 165 : 1995BS EN 16
8、5 : 1996 Personal eye protection Vocabulary EN 166 : 1995BS EN 166 : 1996 Personal eye protection Specifications BS EN 292 Safety of machinery Basic concepts General principles for design EN 292-1 : 1991Part 1 : 1991 Basic terminology, methodology EN 292-2 : 1991Part 2 : 1991 Technical principles an
9、d specifications EN 294 : 1992BS EN 294 : 1992 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs EN 10025 : 1990BS EN 10025 : 1990 Hot rolled products of non-alloy structural steels Technical delivery conditions EN 25353 : 1988BS EN 5631 : 1978 Specificati
10、on for earth moving machinery and tractors and machinery for agriculture and forestry seat index point Compliance with a British Standard does not of itself confer immunity from legal obligations. CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r
11、 Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN 706 : 1996 E EUROPEAN STANDARDEN 706 NORME EUROPE ENNE EUROPA ISCHE NORM August 1996 ICS 65.060.60 Descriptors: Agricultural machinery, vine shoot tipping machines, safety of machines
12、, accident prevention, safety requirements, specifications, design, inspection, hazards, technical notices, utilization, marking English version Agricultural machinery Vine shoot tipping machines Safety Mate riel agricole Rogneuses a vignes Se curite Landmaschinen Reblaubschneidegera te Sicherheit T
13、his European Standard was approved by CEN on 1996-07-11. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference
14、s concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into i
15、ts own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switz
16、erland and United Kingdom. Page 2 EN 706 : 1996 BSI 1997 Foreword This European Standard has been prepared by Technical Committee CEN/TC 144, Tractors and machinery for agriculture and forestry, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national
17、 standard, either by publication of an identical text or by endorsement, at the latest by February 1997, and conflicting national standards shall be withdrawn at the latest by February 1997. This European Standard has been prepared under a mandate given to CEN by the European Commission and the Euro
18、pean Free Trade Association, and supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany,
19、Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 Introduction3 1Scope3 2Normative references3 3Safety requirements and/or measures4 3.1General4 3.2Protection whilst handling and during storage4 3.3P
20、rotection against hazards associated with moving power transmission parts4 3.4Protection against unintentional contact with the cutting tools4 3.5Protection against ejection of vegetable waste4 3.6Protection against breakage of the cutting tools4 3.7Balancing of the cutting tools4 3.8Locking of late
21、ral movement4 4Verification of safety requirements and/or measures7 4.1General7 4.2Impact test7 5Information for use9 5.1Instruction handbook9 5.2Marking9 Annex A(normative) List of hazards10 Page 3 EN 706 : 1996 BSI 1997 Introduction The extent to which hazards are covered is indicated in the scope
22、 of this standard. These hazards are specific to vine shoot tipping machines. The hazards that are common to all the agricultural and forestry machines will be dealt with in a general standard currently in preparation. Machines shall comply as appropriate with EN 292 for hazards which are not dealt
23、with and especially with annex A of EN 292-2 : 1991/A1 : 1995 when EN 292 does not give precise requirements. 1 Scope This standard specifies safety requirements and their verification for design and construction of self-propelled, mounted or semi-mounted vine shoot tipping machines. These mobile ma
24、chines are used for trimming vineyard and other fruit trees that grow in the same way (trellising plants) and similar applications. Their cutting tools are either: high speed rotative blades (which cut by impact); or rotative blade and counter blade (which cut by shearing); or reciprocating cutting
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 706-1997 Agricultural machinery Vine shoot tipping machines Safety 706 1997
链接地址:https://www.31doc.com/p-3648067.html