BS EN 716-2-2008 Furniture — Children’s cots and folding cots for domestic use — Part 2 Test methods.pdf
《BS EN 716-2-2008 Furniture — Children’s cots and folding cots for domestic use — Part 2 Test methods.pdf》由会员分享,可在线阅读,更多相关《BS EN 716-2-2008 Furniture — Children’s cots and folding cots for domestic use — Part 2 Test methods.pdf(36页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 716-2:2008 Furniture Childrens cots and folding cots for domestic use Part 2: Test methods ICS 97.140; 97.190 ? Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 13/03/2009 01:14, (c) BSI BS EN 716-2:2008 This British Standard was p
2、ublished under the authority of the Standards Policy and Strategy Committee on 31 July 2008 BSI 2008 ISBN 978 0 580 58654 5 National foreword This British Standard is the UK implementation of EN 716-2:2008. It supersedes BS 7423:1999 and BS EN 716-2:1996, which are withdrawn. BSI, as a member of CEN
3、, is obliged to publish EN 716-2 as a British Standard. However, attention is drawn to the fact that during the development of this European Standard, the UK committee voted against its approval as a European Standard. The reason for this disapproval was that, in the opinion of the UK Committee, BS
4、EN 716-2 does not address the safety issues related to the interaction of other products that might be supplied and intended to be attached to cots. In these instances, an additional risk assessment should be undertaken. The UK participation in its preparation was entrusted to Technical Committee CW
5、/41, Child use and care articles. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British S
6、tandard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 13/03/2009 01:14, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 716-2 March
7、 2008 ICS 97.140; 97.190Supersedes EN 716-2:1995 English Version Furniture - Childrens cots and folding cots for domestic use - Part 2: Test methods Meubles - Lits nacelle fixes et pliants usage domestique pour enfants - Partie 2 : Mthodes dessai Mbel - Kinderbetten und Reisekinderbetten fr den Wohn
8、bereich - Teil 2: Prfverfahren This European Standard was approved by CEN on 2 February 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-dat
9、e lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th
10、e responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hung
11、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centr
12、e: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 716-2:2008: E Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 13/03/2009 01:14, (c) BSI EN 71
13、6-2:2008 (E) 2 Contents Page Foreword4 1Scope 5 2Normative references5 3General test conditions.5 3.1Preliminary preparation 5 3.2Test equipment 5 3.3Application of forces.6 3.4Tolerances6 3.5Test sequence6 3.6Prevention of movement during test.6 4Test apparatus .6 4.1Measuring probes6 4.2Bottom imp
14、actor7 4.3Test mattress8 4.4Side impactor.8 4.5Loading pad9 4.6Stops.9 4.7Floor surface10 4.8Test chain and mass .10 4.9Small parts cylinder.10 4.10Test mass .11 4.11Bite tester .11 4.12Retaining block12 4.13Foothold template13 4.14Head probes.13 4.14.1Small head probe.13 4.14.2Large head probe.14 4
15、.15Template for V-shaped openings.14 4.16Test dummy15 5Test procedures.15 5.1Assembly and inspection .15 5.2Footholds16 5.2.1Determination of a foothold16 5.2.2Tests for footholds 17 5.2.3Measurement of distance between footholds and/or top of cot sides and ends19 5.2.4Flexible materials.20 5.3Measu
16、rements20 5.3.1Holes, gaps and openings inside the cot20 5.3.2Holes, gaps and openings on the outside of the cot.21 5.4Small parts23 5.4.1General23 5.4.2Torque test .23 5.4.3Tension test24 5.5Bite test.24 5.6Strength of cot base and mattress base (impact test).24 5.7Strength of sides and ends.25 5.7
17、.1Static load test of side slats (bending test) 25 5.7.2Strength of sides or side slats (impact test).26 5.7.3Strength of corners (impact test).27 BS EN 716-2:2008 Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 13/03/2009 01:14, (c) BSI ? EN 716-2:2008
18、 (E) 3 5.7.4Strength of mesh and flexible sides and ends (static load test)27 5.8Strength of frame and fastenings28 5.8.1Vertical static load test .28 5.8.2Durability test.29 5.9Snag points30 5.10Stability.30 5.11Locking mechanisms31 5.11.1Durability31 5.11.2Strength31 6Test report31 Bibliography32
19、BS EN 716-2:2008 Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 13/03/2009 01:14, (c) BSI ? EN 716-2:2008 (E) 4 Foreword This document (EN 716-2:2008) has been prepared by Technical Committee CEN/TC 207 “ Furniture” , the secretariat of which is held b
20、y UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2008. Attention is drawn to the possibility
21、that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 716-2:1995. According to the CEN/CENELEC Internal Regulations, the national standards organizati
22、ons of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania
23、, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Significant technical differences between this edition and EN 716-2:1995 are as follows: a) Following items were made more concrete or introduced: Test equipment (3.2), Application of forces (3.3), Tolerances (3.4) and under Te
24、st equipment (4), Test mattress (4.3), Device for bite test (4.11), Template for foot hold (4.13), Head probes (4.14), Testing device for V-shaped openings (4.15) and Retaining block (4.12); b) Elaboration and specification of the test procedures (5), Assembly and inspection (5.1), for the measureme
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 716-2-2008 Furniture Childrens cots and folding for domestic use Part Test methods 716 2008 Children
链接地址:https://www.31doc.com/p-3648086.html