BS EN 840-3-2004 Mobile waste containers — Part 3 Containers with 4 wheels with a capacity up to 1 300 l with.pdf
《BS EN 840-3-2004 Mobile waste containers — Part 3 Containers with 4 wheels with a capacity up to 1 300 l with.pdf》由会员分享,可在线阅读,更多相关《BS EN 840-3-2004 Mobile waste containers — Part 3 Containers with 4 wheels with a capacity up to 1 300 l with.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 840-3:2004 Mobile waste containers Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices Dimensions and design The European Standard EN 840-3:2004 has the status of a British Standard ICS 13.030.40 ? Licensed
2、copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 26/03/2009 08:59, (c) BSI BS EN 840-3:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 18 March 2004 BSI 18 March 2004 ISBN 0 580 43567 9 National forew
3、ord This British Standard is the official English language version of EN 840-3:2004. It supersedes BS EN 840-3:1997 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee B/508, Waste management, to Subcommittee B/508/1, Waste containers and associated lifti
4、ng devices, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalo
5、gue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corr
6、ect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests inf
7、ormed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright notice displayed in this document in
8、dicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 26/03/2009 08:59, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 840-3 March 2004 ICS 13.0
9、30.40Supersedes EN 840-3:1997 English version Mobile waste containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design Conteneurs roulants dchets - Partie 3: Conteneurs 4 roues de capacit infrieure ou
10、gale 1300 l couvercle(s) bomb(s), pour lve-conteneurs par tourillon et/ou peigne - Dimensions et conception Fahrbare Abfallsammelbehlter - Teil 3: Behlter mit 4 Rdern und einem Nennvolumen bis 1300 l mit Schiebedeckel(n), fr Schttungen fr Zapfenaufnahme und/oder fr Kammschttungen - Mae und Formgeb T
11、his European Standard was approved by CEN on 10 December 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref
12、erences concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member
13、into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan
14、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rig
15、hts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 840-3:2004: E Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 26/03/2009 08:59, (c) BSI EN 840-3:2004 (E) 2 Contentspage Foreword. 3 1Scope . 4 2No
16、rmative references. 4 3Terms and definitions. 4 4Volumes. 5 5Dimensions and design 5 6Nominal Load 6 7Safety and health requirements 6 8Testing . 6 9Marking 6 10Designation 7 Annex A (informative) Recommendations for manufacturers of lifting devices . 18 Annex B (informative) A-Deviations . 20 Licen
17、sed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 26/03/2009 08:59, (c) BSI w w w . b z f x w . c o m EN 840-3:2004 (E) 3 Foreword This document (EN 840-3:2004) has been prepared by Technical Committee CEN/TC 183 “Waste management”, the secretariat of which is
18、 held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2004, and conflicting national standards shall be withdrawn at the latest by September 2004. This document supersedes EN 840
19、-3:1997. This draft European Standard is one part of the series of standards of EN 840 about “Mobile waste containers“ comprising the following parts: Part 1:Containers with 2 wheels with up to 400 l for comb lifting devices - Dimensions and design. Part 2:Containers with 4 wheels with a capacity up
20、 to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design. Part 3:Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design. Part 4:Containers with 4 wheels with a capacity up to 1 70
21、0 l with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices - Dimensions and design. Part 5:Performance requirements and test methods. Part 6:Safety and health requirements. Annexes A and B are informative. According to the CEN/CENELEC Internal Regulations, the national standards
22、organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovaki
23、a, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 26/03/2009 08:59, (c) BSI w w w . b z f x w . c o m EN 840-3:2004 (E) 4 1 Scope This European Standard specifies dimensions and design requiremen
24、ts of mobile waste containers with 4 wheels, with dome lid(s) and capacity up to 1300 l to be used by trunnion and/or comb lifting device. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cit
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 840-3-2004 Mobile waste containers Part with wheels capacity up to 300 840 2004
链接地址:https://www.31doc.com/p-3648280.html