BS EN 812-1997+A1-2001 Industrial bump caps.pdf
《BS EN 812-1997+A1-2001 Industrial bump caps.pdf》由会员分享,可在线阅读,更多相关《BS EN 812-1997+A1-2001 Industrial bump caps.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 812:1998 Incorporating Amendment No. 1 Industrial bump caps The European Standard EN 812:1997, with the incorporation of amendment A1:2001, has the status of a British Standard ICS 13.340.20 ? BS EN 812:1998 This British Standard, having been prepared under the direction of th
2、e Health and Environment Sector Board, was published under the authority of the Standards Board and comes into effect on 15 February 1998 BSI 30 July 2002 The following BSI references relate to the work on this standard: Committee reference PH/6/1 ISBN 0 580 28832 3 National foreword This British St
3、andard is the English language version of BS EN 812:1997, including amendment A1:2001, published by the European Committee for Standardization (CEN). It supersedes BS 4033:1966 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags ?. Tag
4、s indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by ?. The UK participation in its preparation was entrusted by Technical Committee PH/6, Head protection, to Subcommittee PH/6/1, Industrial safety helmets, which has th
5、e responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section en
6、titled “ International Standards Correspondence Index” , or by using the “ Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appliation. Compl
7、iance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related
8、 international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 15 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. A
9、mendments issued since publication Amd. No.DateComments 1366630 July 2002See national foreword EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 812 October 1997 + A1 December 2001 ICS 13.340.10 Descriptors: Industries, helmets, accident prevention, safety, specifications, physical properties, sh
10、ock resistance, perforating strength, tests, marking English version Industrial bump caps (includes amendment A1:2001) Casquettes anti-heurt pour l industrie (inclut l amendement A1:2001) Industrie-Anstokappe (enthlt nderung A1:2001) This European Standard was approved by CEN on 8 October 1997. Amen
11、dment A1 was approved by CEN on 4 November 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer
12、ning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own l
13、anguage and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Swede
14、n, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Me
15、mbers. Ref. No. EN 812:1997 + A1:2001 E EN 812:1997 BSI 30 July 2002 ii Foreword This European Standard has been prepared by Technical Committee CEN/TC 158, Head protection, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by pu
16、blication of an identical text or by endorsement, at the latest by April 1998, and conflicting national standards shall be withdrawn at the latest by April 1998. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association,
17、and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impleme
18、nt this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This amendment EN 812:1997/A1:2001 to the EN 812:199
19、7 has been prepared by Technical Committee CEN/TC 158, Head protection, the Secretariat of which is held by BSI. This amendment to the European Standard EN 812:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2
20、002, and conflicting national standards shall be withdrawn at the latest by June 2002. This amendment to the European Standard EN 812:1997 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Dire
21、ctive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, N
22、orway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Forewordii 1Scope3 2Normative references3 3Definitions3 4Physical requirements4 5Performance requirements 5 6Test requirements6 7Marking and information11 Annex A (informative) Recommendations for materials and constru
23、ction13 Annex B (informative) Artificial ageing14 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives15 ? EN 812:1997 BSI 30 July 2002 3 1 Scope This European Standard specifies physical and performance requirements, methods
24、 of test and marking requirements for industrial bump caps. Industrial bump caps are intended to provide protection to the wearer against the effects of striking his head against hard, stationary objects with sufficient severity to cause laceration or other superficial injuries. They are not intende
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 812-1997+A1-2001 Industrial bump caps 812 1997 A1 2001
链接地址:https://www.31doc.com/p-3648284.html