EN 10209-1996 涂釉低碳钢制冷轧扁平制品.交货技术条件.pdf
《EN 10209-1996 涂釉低碳钢制冷轧扁平制品.交货技术条件.pdf》由会员分享,可在线阅读,更多相关《EN 10209-1996 涂釉低碳钢制冷轧扁平制品.交货技术条件.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10209:1996 Cold-rolled low carbon steel flat products for vitreous enamelling Technical delivery conditions The European Standard EN 10209:1996 has the status of a British Standard BS EN 10209:1996 This British Standard, having been prepared under the direction of the Iron and
2、 Steel Sector Board, was published under the authority of the Standards Board and comes into effect on 15 July 1996 BSI 12-1998 The following BSI references relate to the work on this standard: Committee reference ISM/10 Draft for comment 92/37552 DC ISBN 0 580 22873 8 Committees responsible for thi
3、s British Standard The preparation of this British Standard was entrusted to Technical Committee ISM/10, upon which the following bodies were represented: British Railways Board British Steel Industry Cold Rolled Sections Association Society of Motor Manufacturers and Traders Ltd. The following bodi
4、es were also represented in the drafting of the standard, through subcommittees and panels: British Welded Steel Tube Association Coated Metals Limited Department of the Environment (Property Services Agency) International Tin Research Institute Metal Roof Deck Association National Association of St
5、eel Stockholders National Centre of Tribology Paintmakers Association of Great Britain Ltd. Zinc Development Association Amendments issued since publication Amd. No.DateComments BS EN 10209:1996 BSI 12-1998i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text
6、 of EN 10209 3 BS EN 10209:1996 ii BSI 12-1998 National foreword This British Standard has been prepared under the direction of the Iron and Steel Standards Policy Committee and is the English language version of EN 10209:1994, Cold-rolled low carbon steel flat products for vitreous enamelling Techn
7、ical delivery conditions, published by the European Committee for Standardization (CEN). It supersedes BS 1449-1.3:1991 which is withdrawn. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct applicat
8、ion. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding British Standard BS EN 10002 Tensile testing of metallic materials EN 10002-1:1990Part 1:1990 Method of test at ambient temperature EN 10002-2:1992
9、Part 2:1992 Verification of the force measuring system of the tensile testing machine EN 10020:1988BS EN 10020:1991 Definition and classification of grades of steel BS EN 10027 Designation systems for steel EN 10027-1:1992Part 1:1992 Steel names, principal symbols EN 10027-2:1991Part 2:1992 Steel nu
10、mbers EN 10079:1992BS EN 10079:1993 Definition of steel products EN 10131:1991BS EN 10131:1991 Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming Tolerances on dimensions and shape EN 10204:1991BS EN 10204:1991 Metallic products Types of inspection documents
11、 Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 18, an inside back over and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendmen
12、t table on the inside front cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10209 April 1996 ICS 77.140.50 Descriptors: Iron and steel products, cold rolled products, metal plates, low carbon steels, vitreous enamels, cupping, folding, delivery condition, surface condition, quality, chem
13、ical composition, mechanical properties, tests English version Cold-rolled low carbon steel flat products for vitreous enamelling Technical delivery conditions Produits plats lamins froid, en acier doux pour maillage par vitrification Conditions techniques de livraison Kaltgewalzte Flacherzeugnisse
14、aus weichen Sthlen zum Emaillieren Technische Lieferbedingungen This European Standard was approved by CEN on 1995-03-21. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho
15、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma
16、de by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy
17、, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No
18、. EN 10209:1996 E EN 10209:1996 BSI 12-1998 2 Foreword This European Standard has been prepared by Technical Committee ECISS/TC 13, Flat products for cold working Qualities, dimensions, tolerances and specific tests, the secretariat of which is held by IBN. This European Standard shall be given the
19、status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 1996, and conflicting national standards shall be withdrawn at the latest by October 1996. According to the CEN/CENELEC Internal Regulations, the following countries are bound to imp
20、lement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1Scope 3 2Normative references 3 3Definitions 3 4Designation 3 5
21、Requirements 4 6Tests 5 7Marking 7 8Packaging 7 9Disputes 7 10Information to be supplied by the purchaser at the time of ordering 7 Annex A (normative) Method for determining the coefficient of plastic anisotropy r 8 Annex B (normative) Method for determining the resistance to fish scaling of a stee
22、l sheet for enamelling 9 Annex C (normative) Method for determining mass loss (iron loss) due to pickling for steel grades for direct enamelling in accordance with 5.4.2 13 Annex D (normative) Method for determining the adherence level of enamel applied to a steel sheet 14 Annex E (informative) Char
23、acteristics for the selection of enamelling steel grades 18 Annex F (informative) List of national standards corresponding to EURONORMs quoted in reference (see clause 2) Inside back cover Figure B.1 Permeation curve11 Figure B.2 Apparatus for recording the hydrogen permeability of sheets12 Figure D
24、.1 Impact testing machine16 Figure D.2 Enamel adherence test: impact test17 Table 1 Surface finishes and standard roughness5 Table 2 Characteristics6 Table A.18 Table D.1 Drop height h14 Table F.1 EURONORMs and corresponding national standardsInside back cover EN 10209:1996 BSI 12-19983 1 Scope This
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- EN 10209-1996 涂釉低碳钢制冷轧扁平制品.交货技术条件 10209 1996 低碳钢 制冷 扁平 制品 交货 技术 条件
链接地址:https://www.31doc.com/p-3655480.html