GE-FANUC全套资料(英文)之OPENSYS.pdf
《GE-FANUC全套资料(英文)之OPENSYS.pdf》由会员分享,可在线阅读,更多相关《GE-FANUC全套资料(英文)之OPENSYS.pdf(1837页珍藏版)》请在三一文库上搜索。
1、GE Fanuc Automation Computer Numerical Control Products Windows 95 and Windows NT 32-Bit Drivers and Libraries for Open CNC Systems Reference Manual GFK-1365BNovember 1997 GFL-001 Warnings, Cautions, and Notes as Used in this Publication Warning Warning notices are used in this publication to emphas
2、ize that hazardous voltages, currents, temperatures, or other conditions that could cause personal injury exist in this equipment or may be associated with its use. In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used. Caution Caution no
3、tices are used where equipment might be damaged if care is not taken. Note Notes merely call attention to information that is especially significant to understanding and operating the equipment. This document is based on information available at the time of its publication. While efforts have been m
4、ade to be accurate, the information contained herein does not purport to cover all details or variations in hardware or software, nor to provide for every possible contingency in connection with installation, operation, or maintenance. Features may be described herein which are not present in all ha
5、rdware and software systems. GE Fanuc Automation assumes no obligation of notice to holders of this document with respect to changes subsequently made. GE Fanuc Automation makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the acc
6、uracy, completeness, sufficiency, or usefulness of the information contained herein. No warranties of merchantability or fitness for purpose shall apply. Copyright 1997 GE Fanuc Automation North America, Inc. All Rights Reserved. 1 Introduction _ 8 1. Extended Libraries_ 9 1.1 CNC/PMC Data Window Li
7、brary for Windows 95 _ 9 1.1.1 Outline _9 1.1.2 General Description_10 1.1.3 Library Handle _12 (1) Library Handle Description. _ 12 (2) Library Handle Cautions. _ 13 1.1.4 Return Status of Data Window Function_14 1.1.5 Function List _18 CNC: Multi-Connection of HSSB_ 18 CNC: Functions Related to Co
8、ntrolled Axis/Spindle_ 18 CNC: Functions Related to CNC Program_ 19 CNC: Functions Related to CNC File Data _ 20 CNC: Functions Related to Tool Life Management Data_ 22 CNC: Functions Related to History Data _ 23 CNC: Functions Related to Servo/Spindle _ 23 CNC: Functions Related to Data Server, DNC
9、1, DNC2, OSI-Ethernet_ 24 CNC: Functions Related to PUNCH PRESS_ 25 CNC: Functions Related to LASER _ 26 CNC: Functions Related to Servo Learning Data_ 27 CNC: Functions Related to Others _ 27 CNC: Functions Related to PMC _ 28 1.1.6 Multi-Connection of HSSB_29 Structure of library for multi-connect
10、ion _ 29 (1) Allocate the Library Handle (for Multi-Connection) (Version 1.2 and newer) _ 30 (2) Read the Number of Node (Version 1.2 and newer)_ 31 (3) Read the Node Information (Version 1.2 and newer)_ 32 (4) Set the Default Node Number (Version 1.2 and newer) _ 34 1.1.7 Function Reference Related
11、 to Controlled Axes/Spindle _35 (1) Read Actual Axis Feedrate (F) _ 35 (2) Read Absolute Axis Position_ 37 (3) Read Machine Axis Position_ 39 (4) Read Relative Axis Position _ 41 (5) Read Distance to Go _ 43 (6) Read Skip Position_ 45 (7) Read Servo Delay Value _ 47 (8) Read Acceleration/Deceleratio
12、n Delay Value_ 49 (9) Read All Dynamic Data_ 51 (10) Set Origin / Preset Relative Axis Position_ 56 (11) Preset Work Coordinate_ 58 (12) Read Manual Overlapped Motion Value_ 60 (13) Cancel Manual Overlapped Motion Value _ 63 (14) Read Actual Spindle Speed (S) _ 65 (15) Read Load Information of Seria
13、l Spindle _ 67 (16) Read Maximum RPM Ratio of Serial Spindle _ 69 (17) Read Gear Ratio of Serial Spindle_ 71 (18) Read tool tip coordinates for 3-dimensional handle feed(Version 1.3 and newer)_ 73 (19) Read handle interrupt pulse amount for 3-dimensional handle feed(Version 1.3 and newer)_ 75 2 (20)
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- GE FANUC 全套 资料 英文 OPENSYS
链接地址:https://www.31doc.com/p-3655876.html