IEEE Std 1019-1985 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene Insulation.pdf
《IEEE Std 1019-1985 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene Insulation.pdf》由会员分享,可在线阅读,更多相关《IEEE Std 1019-1985 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene Insulation.pdf(12页珍藏版)》请在三一文库上搜索。
1、AMERKAN NAIK)rlAL L STANDARD d IEEE Std 1019-1985 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene Insulation Published by The Institute of Electrical and Electronics Engineers, Inc 345 East 47th Street, New York, NY 10017, USA December 18, 1984 SH09795 IEEE St
2、d 1019-1985 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene Insulation SpOnSQr Petroleum and Chemical Industry Committee of the IEEE Industry Applications Society Approved June 14, 1984 IEEE Standards Board Approved September 18, 1985 American National Standar
3、ds Institute 0 Copyright 1984 by The Institute of Electrical and Electronics Engineers, Inc 345 East 47th Street, New York, NY 10017, USA No part of this publication may be reproduced in any form, in an electronic retrieval system or othzrwise, without the prior written permission ofthe publisher. I
4、EEE Standards documents are developed within the Technical Com- mittees of the IEEE Societies and the Standards Coordinating Commit- tees of the IEEE Standards Board. Members of the committees serve voluntarily and without compensation. They are not necessarily mem- bers of the Institute. The standa
5、rds developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE which have expressed an in- terest in participating in the development of the standard. Use of an IEEE Standard is wholly voluntary. The existence of
6、 an IEEE Standard does not imply that there are no other ways to pro- duce, test, measure, purchase, market, or provide other goods and ser- vices related to the scope of the IEEE Standard. Furthermore, the view- point expressed at the time a standard is approved and issued is subject to change brou
7、ght about through developments in the state of the art and comments received from users of the standard. Every IEEE Stan- dard is subjected to review at least once every five years for revision or reaffirmation. When a document is more than five years old, and has not been reaffirmed, it is reasonab
8、le to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. Comments for revision of IEEE Standards are welcome from any interested party, regardl
9、ess of membership affiliation with IEEE. Sug- gestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Interpretations: Occasionally questions may arise regarding the mean- ing of portions of standards as they relate to spec
10、ific appiications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of all concerned interests, it is important to ensure that any interpretation has also received th
11、e con- currence of a balance of interests. For this reason IEEE and the mem- bers of its technical committees are not able to provide an instant re- sponse to interpretation requests except in those cases where the mabter has previously received formal consideration. Comments on standards and reques
12、ts for interpretations should be ad- dressed to: Secretary, IEEE Standards Board 345 East 47th Street New York, NY 10017 USA Foreword (This Foreword is not a part of IEEE Std 1019-1985, IEEE Recommended Practice for Specifying Electric Sub- mersible Pump Cable-Polypropylene Insulation.) This recomme
13、nded practice, under the jurisdiction of the IEEE Industry Applications Society, Petroleum and Chemical Industry Committee, presents minimum requirements for the construction, manufacturing, purchasing, and application of electric submersible pump cable. The configuration of the cable is round, with
14、 polypropylene insulation, nitrile jacket, and armor. This recommended practice may be used by anyone desiring to do so and is presented as minimum criteria for construction of this class submersible cable. It is not intended to restrict innovation or to limit development of improvements in cable de
15、sign. Every effort has been made to assure the accuracy and reliability of the data contained herein; however, the Committee makes no representation, warranty, or guarantee in connection with the publication of this specification and hereby expressly disclaims any liability or responsibility for los
16、s or damage resulting from its use, for any violation of any federal, state, or municipal regulation with which it may conflict, or for the infringement of any patent resulting from the use of this document. At the time this recommended practice was approved the Downhole Working Group of the Petrole
17、um and Chemical Industry Committee had the following membership: M. 0. Durham, Chairman Joseph E. Vandevier, Secretary Rolf Beer J.D. Hunt Frank Vatalero Lynn Boyer Steve Nelson Olin Willis At the time this recommended practice was approved, the Petroleum and Chemical Industry Committee of the IEEE
18、Industry Applications Society had the following membership: R. M. Jackson, Chairman J. A. Adkison S. P. Axe W. Beard V. Burkhardt J. D. Campbell A. J. Chapman B. J. Comingore E. T. Crimmins J. B. Dwyer H. B. Dygert B. E. Ewers E. F. Fagan F. P. Gertson B. E. Gilman D. Grant G. R. Griffith D. C. Azbi
19、ll, Secretary R. A. Hazlewood H. N. Hickok F. P. Hogan J. W. Kilgore P. M. Kinney J. C. Lacour W. H. Levers J. J. Mares B. McDaniel E. F. Merrill R. W. Mills W. Moser R. L. Nailen K. Nicholas M. R. Ogden T. P. Pearson R. J. Fritz, Vice Chairman B. M. Polkinghorn G. D. Rock E. Saavedra F. D. Shaw J.
20、D. Shimble W. A. Short H. Sibley H. D. Slief A. W. Smith E. E. Smith T. B. Smith J. A. Stewart P. 0. Teter E. B. Turner A. L. Verheil W. E. Withers When the IEEE Standards Board approved this standard on June 14, 1984, it had the following membership: James H. Beall, Chairman John E. May, Vice Chair
21、man Sava I. Sherr, Secretary J. J. Archambault John T. Boettger J. V. Bonucchi Rene Castenschiold Edward J. Cohen Len S. Corey Donald C. Fleckenstein Jay Forster Daniel L. Goldberg Donald N. Heirman Irvin N. Howell Jack Kinn Joseph L. Koepfinger* Irving Kolodny George Konomos R. F. Lawrence Donald T
22、. Michael* John P. Riganati Frank L. Rase Robert W. Seelbach Jay A. Stewart Clifford 0. Swanson W. B. Wilkens Charles J. Wylie *Member emeritus Contents PAGE SECTION 1 . Scope . 7 2 . References . 7 3 . Conductors . 8 3.1 Material 8 3.2 Construction . 8 3.4 GasBlockage 8 4 . Insulation 8 4.1 Materia
23、l 8 5.1 Material 8 5.2 Construction . 9 6 . Armor . 9 6.1 Material 9 3.3 Conductivity . 8 4.2 Construction . 8 8 . 5 . Assembly and Jacket 6.2 Construction . 9 9 7.1 Testing . 9 7.2 ConductorTests 9 7.3 Electrical Tests 9 7.4 Field Acceptance Test 10 7 . Manufacturer Electrical Test Requirements . .
24、 8 . Cable Ampacity TABLES Table 1 Physical Characteristics . 8 Table 2 Polypropylene Properties 8 Table 5 Ampacity Ratings . Table 3 Nitrile Properties 9 Table 4 Voltage Ratings 10 10 . IEEE Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene Insulation 1. Scope 1.1 T
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE Std 1019-1985 Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene 1019
链接地址:https://www.31doc.com/p-3657764.html