IEEE Std C37.94-2002 IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment.pdf
《IEEE Std C37.94-2002 IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment.pdf》由会员分享,可在线阅读,更多相关《IEEE Std C37.94-2002 IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment.pdf(19页珍藏版)》请在三一文库上搜索。
1、IEEE Std C37.94-2002 IEEE Standards C37.94 TM IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment Published by The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA 31 March 2003 I
2、EEE Power Engineering Society Sponsored by the Power System Relaying Committee and Power System Communications Committee IEEE Standards Print: SH95027 PDF: SS95027 Authorized licensed use limited to: Tsinghua University Library. Downloaded on December 25,2010 at 12:49:40 UTC from IEEE Xplore. Restri
3、ctions apply. Recognized as an American National Standard (ANSI) The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2003 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 31 March 2003. Printed
4、 in the United States of America. Print: ISBN 0-7381-3375-6 SH95027 PDF: ISBN 0-7381-3376-0 SS95027 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Std C37.94 -2002 IEEE Standard fo
5、r N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment Sponsor Power System Relaying Committee and Power System Communications Committee of the IEEE Power Engineering Society Approved 21 January 2003 American National Standards Institute Approved 12
6、 September 2002 IEEE-SA Standards Board Abstract: An optical interface for use between teleprotection and digital multiplexer equipment that can operate at a data rate of N times 64 kilobit per second where N = 1, 212 is described. Requirements for both physical connection and the communications tim
7、ing are also included. Keywords: alarm indication signal, bit error rate, cyclic redundancy check, loss of frame, loss of signal, multimode optical fiber, multiplexer,remote defect indication, teleprotection, unit interval Authorized licensed use limited to: Tsinghua University Library. Downloaded o
8、n December 25,2010 at 12:49:40 UTC from IEEE Xplore. Restrictions apply. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus develop
9、ment process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the fi nal product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the pro
10、cess and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal
11、 injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document. The IEEE does not warrant or represent the accuracy or co
12、ntent of the material contained herein, and expressly disclaims any express or implied warranty, including any implied warranty of merchantability or fi tness for a specifi c purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents are supp
13、lied “ AS IS .” The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued
14、 is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every fi ve years for revi- sion or reaffi rmation. When a document is more than fi ve years old and has not been rea
15、ffi rmed, it is reasonable to conclude that its contents, although still of some value, do not wholly refl ect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEEE is
16、 not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of a co
17、m- petent professional in determining the exercise of reasonable care in any given circumstances. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specifi c applications. When the need for interpretations is brought to the attention o
18、f IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its
19、societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of mem
20、bership affi liation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Standards Board 445 Hoes Lane P.O.
21、 Box 1331 Piscataway, NJ 08855-1331 USA Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payme
22、nt of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Note: A
23、ttention is called to the possibility that implementation of this standard may require use of subject mat- ter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be
24、 responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. Authorized licensed use limited to: Tsinghua University Library. Downloaded on December 25,201
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE Std C37.94-2002 Standard for Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection C37
链接地址:https://www.31doc.com/p-3658704.html