IEEE Std C37.111-1991 IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems.pdf
《IEEE Std C37.111-1991 IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems.pdf》由会员分享,可在线阅读,更多相关《IEEE Std C37.111-1991 IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems.pdf(28页珍藏版)》请在三一文库上搜索。
1、IEEE C37.111-1991 IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems Sponsor Power System Relaying Committee of the IEEE Power Engineering Society Approved June 27, 1991 IEEE Standards Board Abstract: A common format for the data files and exchange medium needed for
2、 the interchange of various types of fault, test, or simulation data is defined. Sources of transient data are described, and the case of diskettes as an exchange medium is recommended. Issues of sampling rates, filters, and sample rate conversions for transient data being exchanged are discussed. F
3、iles for data exchange are specified, as is the organization of the data. A sample file is given. Keywords: Configuration file, data file, header file, transient data The Institute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, USA Copyright 1991 by the
4、Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1991 Printed in the United States of America ISBN 1-55937-156-0 No part of the publication may be reproduced in any form, in an electronic retrieval system or otherwise without the prior written permission of the
5、publisher. IEEE Standards documents are developed within the Technical Committees of the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Board. Members of the committees serve voluntarily and without compensation. They are not necessarily members of the Institute. The
6、standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE that have expressed an interest in participating in the development of the standard. Use of an IEEE Standard is wholly voluntary. The existence
7、 of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought
8、 about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to concl
9、ude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. Comments for revision of IEEE Standards are welcome from any interested party, regardless of memb
10、ership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applicatio
11、ns. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of all concerned interests, it is important to ensure that any interpretation has also received the concurrence o
12、f a balance of interests. For this reason IEEE and the members of its technical committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments on standards and requests for interpretation
13、s should be addressed to: Secretary, IEEE Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331 USA IEEE Standards documents are adopted by the Institute of Electrical and Electronics Engineers without regard to whether their adoption may involve patents on articles, materials, or pr
14、ocesses. Such adoption does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the standards documents. iii Foreword This Foreword is not a part of IEEE C37.111-1991, IEEE Standard Format for Transient Data Exchange (COMTRADE) for Power Syste
15、ms. The increasing use of digital computer-based protection, oscillography, measurement, and control functions in electric power substations has created a potential for accumulating large quantities of digital records of power system transient events. In addition to these sources of digital data, an
16、alog and digital power-system simulators also may be used to generate transient digital records. The users of these records are faced with the problem of having to cope with different formats used by each of these systems to generate, store, and transmit these records. COMTRADE defines a common form
17、at for storing digital records of transient events. This standard is to be used for facilitating physical exchange of data files on storage media. It is hoped that this standard will be of considerable value to the users and producers of digital data files describing transient events on electric pow
18、er systems. At the time that it developed this standard, the COMTRADE Working Group had the following membership: A. G. Phadke, Chair J. A. Jodice, Vice Chair M. G. Adamiak J. D. Brandt J. A. Bright R. O. Burnett, Jr. C. H. Castro T. W. Cease D. M. Clark G. Clough D. C. Dawson D. Fulton E. M. Gulach
19、enski D. Hollands A. T. Howard D. Jerrings M. Kezunovic D. J. Lawerence M. Lefrancois H. I. Mehta R. J. Murphy D. Robertson M. S. Sachdev J. S. Thorp E. A. Udren M. A. Xavier At the time that it reviewed and approved this standard for balloting, the Relay Channels Subcommittee had the following memb
20、ership: E. A. Udren, Chair P. R. Drum, Vice Chair B. Bozoki R. J. Fernandez J. W. Hohn D. Hollands J. D. Huddleston, III J. W. Ingleson S. L. Nilsson A. G. Phadke E. T. Sage L. J. Schulze H. S. Smith J. E. Stevens J. A. Zipp At the time that it balloted and approved this standard for submission to t
21、he IEEE Standards Board, the Power System Relaying Committee of the IEEE Power Engineering Society had the following membership: J. R. Boyle, Chair J. Zulaski, Vice Chair A. T. Giuiante, Secretary J. C. Appleyard R. E. Arehart C. W. Barnett E. A. Baumgartner R. W. Beckwith J. Berdy J. L. Blackburn J
22、. Blose B. Bozoki J. A. Bright W. R. Brownlee A. A. Burzese H. J. Calhoun J. W. Chadwick D. M. Clark D. E. Colwell S. P. Conrad C. J. Cook iv A. N. Darlington D. C. Dawson R. W. Dempsey R. E. Deitrich J. B. Dingier H. Disante P. R. Drum L. L. Dvorak W. A. Elmore J. T. Emery E. J. Emmerling M. K. Enn
23、s J. Esztergalyos W. E. Feero R. J. Fernandez S. E. Grier C. H., Griffin K. R. Gruesen E. A. Guro R. W. Haas R. E. Hart R. W. Hirtler J. W. Hohn S. H. Horowitz J. Huddleston, III J. W. Ingleson R. H. Jones E. W. Kalkstein T. L. Kaschalk K. J. Khunkhun J. L. Koepfinger J. S. Komisarek W. C. Kotheimer
24、 L. E. Landoll J. R. Latham J. R. Linders H. J. Marieni W. J. Marsh, Jr. Ca A. Mathews G. E. May R. J. Moran C. J. Mozina J. J. Murphy T. J. Murray K. K. Mustaphi G. R. Nail T. Niessink S. L. Nilsson R. W. Ohnesorge G. C. Parr R. W. Pashley A. G. Phadke A. C. Pierce J. M. Postforoosh O. F. Pumphrey
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE Std C37.111-1991 Standard Common Format for Transient Data Exchange COMTRADE Power Systems C37
链接地址:https://www.31doc.com/p-3658756.html