SAE J2224-2002 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging.pdf
《SAE J2224-2002 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging.pdf》由会员分享,可在线阅读,更多相关《SAE J2224-2002 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging.pdf(4页珍藏版)》请在三一文库上搜索。
1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. TO PLACE A DOCUMENT ORDER: +1 (724) 776-4970 FAX: +1 (724) 776-0790 SAE WEB ADDRESS h
3、ttp:/www.sae.org Copyright 2002 Society of Automotive Engineers, Inc. All rights reserved.Printed in U.S.A. SURFACE VEHICLE 400 Commonwealth Drive, Warrendale, PA 15096-0001 INFORMATION REPORT J2224 REV. MAY2002 Issued1994-10 Revised2002-05 Superseding J2224 OCT1994 Identification of Truck, Trailer,
4、 and Bus Wheel Seals and Associated Packaging 1.ScopeThis SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging. 1.1PurposeThe purpose of this document is to provide users of truck, tr
5、ailer, and bus wheel seals a means of identifying the suppliers of all such components by use of the symbology utilized by the suppliers on their components and packaging. 2.ReferencesThere are no referenced publications specified herein. 3.General 3.1To be listed; the supplier should provide eviden
6、ce that the symbol is used. 3.2The following minimum identification is recommended. 3.2.1SEAL IDENTIFICATION a.Trademark or ID b.Date or date code c.Part number d.Side identification (examples: oilside, airside) e.Country of origin (country where molded) 3.2.2PACKAGING IDENTIFICATION a.Trademark or
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SAE J2224-2002 Identification of Truck Trailer and Bus Wheel Seals Associated Packaging J2224 2002
链接地址:https://www.31doc.com/p-3678360.html