《UG高级教程之四.pdf》由会员分享,可在线阅读,更多相关《UG高级教程之四.pdf(786页珍藏版)》请在三一文库上搜索。
1、 UGS PLM Solutions Inc. 2003. All right reserved. UGNX2_CAM基础培训基础培训 UDS yanyifei UGS PLM Solutions Inc. 2003. All right reserved. UGCAM培训课程安排UGCAM培训课程安排UGCAM培训课程安排UGCAM培训课程安排 UDS 1.CAM的基本知识0.5天 2. Planar and Face milling 平面铣及面铣1.0 3.Cavity Milling 型腔铣1.0 4. Fixed Axis Surface Contouring固定轴轮廓铣1.5 5.
2、Point to Point 钻孔 holemaking0.5 6. 复习总结考试0.5 total 5天 UGS PLM Solutions Inc. 2003. All right reserved. UDS Lesson 1 CAM概述CAM概述 本课介绍 1.数控铣加工的基本知识 2.UG铣加工编程通用过程 3.UG铣加工主要术语 4.UG铣加工界面 5.UG铣加工的工具条 6.UG铣加工的操作导航器 UGS PLM Solutions Inc. 2003. All right reserved. 数控铣加工的基本知识数控铣加工的基本知识数控铣加工的基本知识数控铣加工的基本知识 UDS
3、 坐标系: 机床坐标系(右手定则:手心朝上,三手指互相垂直,食指指向为Z,中指为Y,拇指为X。) 机床原点 工件坐标系(OC-XC-YC-ZC表示) 加工坐标系(OM-XM-YM-ZM表示, 加坐标系跟工件坐标系必须重合) 绝对坐标与相对坐标(增量坐标) 机床坐标系 加坐标系跟工 件坐标系重合 UGS PLM Solutions Inc. 2003. All right reserved. 数控机床的基本知识数控机床的基本知识数控机床的基本知识数控机床的基本知识 ?数控机床组成(数控装置、伺服机构、机床主体) ?机床控制方式(点位控制、连续轨迹控制) 点位控制 连续轨迹控制 UGS PLM S
4、olutions Inc. 2003. All right reserved. 数控编程的流程数控编程的流程数控编程的流程数控编程的流程 ?准备工作阶段 ?技术方案阶段 ?数控编程阶段 ?程序定型阶段 数控编程分4个阶段: UGS PLM Solutions Inc. 2003. All right reserved. UDS 加工档案的合理安排加工档案的合理安排加工档案的合理安排加工档案的合理安排 Master Model主模型的定义及命名 xxx_aaa_dwg.prt xxx_assm.prt xxx_aaa_fea.prt xxx_aaa.prt Xxx为零件号为零件号/图号图号 UG
5、S PLM Solutions Inc. 2003. All right reserved. 加工档案的合理安排加工档案的合理安排加工档案的合理安排加工档案的合理安排 UDS 装配 Master Model主模型的引用: 在加工中,我们通过装配,将要加工的零件调入加工装配件中,要加工的零件 被称为Master model。加工数据保存在装配件中。 加工人员对主模型数据为read only,主模型的修改将会更新整个装配件。 UGS PLM Solutions Inc. 2003. All right reserved. 数控铣加工的流程数控铣加工的流程数控铣加工的流程数控铣加工的流程 UDS U
6、GS PLM Solutions Inc. 2003. All right reserved. UDS UGCAM加工类型UGCAM加工类型UGCAM加工类型UGCAM加工类型 UG CAM可以支持2.5-5轴的加工。 下图为UG加工中,三轴加工类型。(基础培训) UGS PLM Solutions Inc. 2003. All right reserved. UG CAM切削数据库UG CAM切削数据库UG CAM切削数据库UG CAM切削数据库 ?工件材料库 ?刀具材料库 ?刀具尺寸库 ?切削方法库 ?切削速度库 UG CAM切削数据库的组成: UGS PLM Solutions Inc.
7、 2003. All right reserved. UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语 ?Machining Environment加工环境 UDS UGS PLM Solutions Inc. 2003. All right reserved. UDS 加工工具条加工工具条加工工具条加工工具条 UGS PLM Solutions Inc. 2003. All right reserved. UDS 加工工具条加工工具条 UGS PLM Solutions Inc. 2003. All right reserved. UDS 加工工具条加
8、工工具条 UGS PLM Solutions Inc. 2003. All right reserved. 操作导航器操作导航器操作导航器操作导航器 UDS UGS PLM Solutions Inc. 2003. All right reserved. 父节点组父节点组父节点组父节点组 刀具tool:刀具尺寸参数。 方法method:加工参数,如进给速度、主轴转速和公差等。 几何体geometry:几何体数据,如,零件、毛坯、MCS、安全平面等。 程序program:决定操作输出的顺序。 UDS UGS PLM Solutions Inc. 2003. All right reserved.
9、 操作的管理方式操作的管理方式操作的管理方式操作的管理方式 四种管理方式四种管理方式 四种管理方式四种管理方式四种管理方式四种管理方式 刀具刀具刀具刀具几何体几何体几何体几何体方法方法方法方法 操作操作操作操作 程序程序程序程序 机床坐标系 几何体 边界 避让 机床坐标系 几何体 边界 避让 余量 公差 进给率 显示 余量 公差 进给率 显示 机床 转台 刀架 刀具 机床 转台 刀架 刀具 输出 成组 次序 输出 成组 次序 UGS PLM Solutions Inc. 2003. All right reserved. MCS(Machine Coordinate System)加工坐标系
10、UG CAM的主要术语 UDS UGS PLM Solutions Inc. 2003. All right reserved. UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语 ?operation 一个工序或一段加工程序称为一个operation. UDS UGS PLM Solutions Inc. 2003. All right reserved. 操作符号操作符号操作符号操作符号 UDS UGS PLM Solutions Inc. 2003. All right reserved. 显示栏目定制显示栏目定制显示栏目定制显示栏目定制 UDS C
11、ustomize column 定制栏目 UGS PLM Solutions Inc. 2003. All right reserved. UDS 显示栏目定制显示栏目定制显示栏目定制显示栏目定制 Customize column 定制栏目 UGS PLM Solutions Inc. 2003. All right reserved. UDS 操作导航器操作导航器操作导航器操作导航器 UGS PLM Solutions Inc. 2003. All right reserved. UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语 ?Boundary边界
12、 ?用于定义加工范围 UDS UGS PLM Solutions Inc. 2003. All right reserved. UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语 ?CLSF(Cutter Location Source File)刀位源文件 UDS UGS PLM Solutions Inc. 2003. All right reserved. UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语UG CAM的主要术语 ?Postprocess后处理 ? ?将刀轨转换为机床代码 UDS UGS PLM Solutions I
13、nc. 2003. All right reserved. UG 数控编程过程UG 数控编程过程UG 数控编程过程UG 数控编程过程 分析几何体 平面/曲面, 粗加工/精加工 选择加工环境 选择 Manufacturing 建立/修改加工 对象父节点 (四个) 程序几何体刀具方法 创建操作生成刀轨刀轨仿真 后处理, 车间工艺文件 数控程序 (NC代码) UDS UGS PLM Solutions Inc. 2003. All right reserved. NC代码NC代码NC代码NC代码 ? ?G00表示主轴以机床确审快速走直线 ?G01表示主轴以编程进给率走直线 ?G02是顺时针走圆弧 ?
14、G03是逆时针走圆弧 ?M03表示主轴顺时针转动 ?M06表示换刀 ?M08开冷却液 ?M09关冷却液 ?T 表示刀具 在NC程序中的部分代码含义(以CINCINNATI为例) UDS UGS PLM Solutions Inc. 2003. All right reserved. NC代码NC代码NC代码NC代码 ?F表示进给率mm/min ?N表示序号 ?R、I 、J表示圆弧半径 ?G92表示编程坐标系 ?G99表示删除所有的坐标原点设置将坐标原点恢复到机床原点 ?G71表示公制 UDS UGS PLM Solutions Inc. 2003. All right reserved. NC
15、代码NC代码NC代码NC代码 ?下面是一实例,在这个例子中,直线长50,圆弧半径为25,直线的左端点 设为编程坐标系的原点。下面是加工程序: ?:G71 ?N10 G99 ?N20 G92 X200 Y200 Z100 ?N30 T01M06 ?N40 S500 M03 ?N50 G00 X0 Y0 Z200 ?N60 G01 Z5 F2000 M08 ?N70 Z0 F100 UDS UGS PLM Solutions Inc. 2003. All right reserved. NC代码NC代码NC代码NC代码 UDS ?N80 X50 ?N90 G02 X50 Y-50 P25 ?N10
16、0 G01 Z5 ?N110 G01 Z100 F2000 M09 ?N120 M05 ?N130 M02 UGS PLM Solutions Inc. 2003. All right reserved. UG 数控编程过程示例UG 数控编程过程示例UG 数控编程过程示例UG 数控编程过程示例 /Cam/cam_part_nx/cavity-1.prt UDS UGS PLM Solutions Inc. 2003. All right reserved. UG 数控编程过程示例UG 数控编程过程示例UG 数控编程过程示例UG 数控编程过程示例 UDS Step 1. 创建一新文件,加入主模型
17、。进入Manufacturing模块。 Step 2. 定义加工环境,初始化加工设置。 Step 3. 创建四个父节点组(刀具tool、方法method、几何体geometry、 程序program)。 Step 4. 创建操作。 Step 5. 定义加工参数。 Step 6. 产生刀轨。 Step 7. 仿真刀轨。 Step 8. 后置处理生成NC代码。! 车身曲面造型车身曲面造型 车身曲面车身曲面 第第1步 打开文件步 打开文件 1. 打开文件 “car_body.prt”, 2. 另存为“xxx_car_body.prt (xxx为你的姓名) 第第2步作前保险杠曲面步作前保险杠曲面 1.
18、Work Layer=1 2.作前保险杠曲面:利用Through Curves。 _所有设置均为缺省设置 第第3步作侧围曲面步作侧围曲面 1. Work Layer=1 2. 作侧围曲面利用Through Curves: _所有设置均为缺省设置 第第4步作后保险杠及其它曲面步作后保险杠及其它曲面 1. Work Layer=1 2. 作后保险杠及其它曲面利用Through Curves _所有设置均为缺省设置 第第5步作前保险杠与侧围之间的过渡曲面步作前保险杠与侧围之间的过渡曲面 1. Work Layer=1 2. 作前保险杠与侧围之间的过渡曲面:利用 Bridge。 _用曲率连续约束 第第
19、6步作后保险杠与侧围之间的过渡曲面步作后保险杠与侧围之间的过渡曲面 1. Work Layer=1 2. 作后保险杠与侧围之间的过渡曲面利用Bridge ? 选择曲率连续约束; ? 分别选择相应的二个曲面、选择Apply; ? 改变View到Top View,可发觉所作的过桥曲面太饱 满已超过车身宽度; ? 选择Drag选择过桥曲面上靠近后保险杠的那条 边; 沿箭头反方向拉曳;直至与车身宽度大约持平为 止。 1 1 2 3 4 5 6 4 6 2 5 3 第第7步作过渡曲面步作过渡曲面 1. Work Layer=1 2. 作后保险杠与侧围之间的过渡曲面利用 Bridge ? 选择曲率连续约束
20、; ? 分别选择相应的二个曲面; 第第8步作发动机引擎罩曲面步作发动机引擎罩曲面 1. 设置 Work Layer =1 Layer 10,11, 12,13,14 = Invisible 2. Insert ? Free Form Feature ? Section ? U-Direction Enlarge让用户生成一个新片体,它既和原始的未修剪面相关,又允许 用户改变各个未修剪边的尺寸。 让用户生成一个新片体,它既和原始的未修剪面相关,又允许 用户改变各个未修剪边的尺寸。 Lesson 9.3Enlarge Sheet Insert ? Free Form Feature ? Enlar
21、ge 类型:类型: 1、Linear 在一个方向上线性地延伸扩大片体的边。 “Linear类型”可以增大片体的大小,但不能减小它。 2、Natural 沿着边的自然曲线延伸扩大片体的边。 “Natural类型”既可以增大也可以减小片体的大小。 Lesson 9.4Transform Sheet Transform Sheet功能能够动态地比例缩放、旋转和平移 单个 功能能够动态地比例缩放、旋转和平移 单个B表面,并实时地从显示中得到反馈。表面,并实时地从显示中得到反馈。 Edit ? Free Form Feature ? Transform Transform Sheet对话框选项对话框选项
22、 Select Control 能够选择变换的控制类型。控制类型有: Scale - 绕选中的轴缩放曲面的比例或尺寸。 Rotate - 绕选中的轴旋转曲面。 Translate - 沿选中的轴平移或移动曲面。 XC Axis沿 x 轴方向缩放、旋转或平移曲面。 YC Axis沿 y 轴方向缩放、旋转或平移曲面。 ZC Axis沿 y 轴方向缩放、旋转或平移曲面。 Reset将曲面重设为原先的值。 Lesson 9.5Deform Sheet Deform Sheet功能能够快速动态地修改单个功能能够快速动态地修改单个 B表面,并实时地从显示中得到反馈。表面,并实时地从显示中得到反馈。 Edi
23、t ? Free Form Feature ? Deform Lesson 9.5Deform Sheet Pivot Control(中心点控制)- 设置进行变形所依据的参 考位置和方向。 中心点控制)- 设置进行变形所依据的参 考位置和方向。 Horizontal 曲面在水平方向变形。 Vertical 曲面在竖直方向变形。 V-Low 变形从曲面上较低的区域开始。 V-High 变形从曲面上较高的区域开始。 V-Middle 变形从曲面的中间区域开始。 Switch H and V - 如果选择此选项,则- 如果选择此选项,则Pivot Control 选项会被改变。选项会被改变。 变形
24、方式变形方式 Stretch (伸缩伸缩) - 伸展或缩短曲面使其变形 Bend (弯曲弯曲) - 使曲面弯曲变形 Skew (扭曲扭曲) -使曲面扭曲变形 Twist (扭转扭转) -扭转曲面使其变形 Shift (移动移动) - 移动曲面使其变形 Reset - 取消所有变形滑尺的设置,重置曲面使其返回到 其原先的状态。 Exercise 1、文件:、文件:ids18_v1.pdf Activity 10-1 Editing Feature Parameters P.340 P.343 Activity 10-2 Editing Surfaces With X-Form P.346 P.3
25、48 2、文件:、文件:ids18_v2.pdf Activity 17-1 Enlarge Sheet -Natural P.196 P.199 Activity 17-2 Transforming Sheets P.204 P.206 Activity 17-3 Deforming Sheets P.204 P.206 3、文件:、文件:car_body.ppt 车身曲面造型设计车身曲面造型设计 Q ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?.?“?. ?0? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?2.?,?28?
26、,$%? ? ? ? ? ? (? ?9?!:? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?(? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?0?,?8,?%? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?0?,?8,?%? ? ? ? !? !? ? !? ? ? ?-?4? ? ?-? ? ?0?2?-? ? ?2.?-? ? ?2.?0? ? ?-?2?-? ? ? ? ? ? ? ? ? ? ? ? ?2?0?0?0? ?
27、? ? ? ? ? ? ? ? ? (? (? (? (? ? ? ? ? ? ? ? ? ?;? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?;.? ? ? ?;.?;.? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? !“? ?#$?%? ? ? ? ?A?A; ?A?A; ? ?*+,-.? ?A?A; ?A?A; ? ? ?
28、? ? ? ? ? ? ? ? ?B.?B.? ? “?6? ? ? ? ? ? ?.? ? ?-?.? ? ?0?0? ? ? ? ? ? ?-(?-( ? )? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? !“? ?#$?%? ? ? ? thus, 124 characters are available for a descriptive name. EDS, All Rights ReservedCAM Transition Student Guide13 How to Use This Manual Layers and Ca
29、tegories There are standard layer assignments as well as standard category names in all (or most) of the cat part files as follows: Layers 1-100, Model Geometry (Category: MODEL) Layers 1-14, Solid Geometry (Category: SOLIDS) Layers 15-20, Linked Objects (Category: LINKED OBJECTS) Layers 21-40, Sket
30、ch Geometry (Category: SKETCHES) Layers 41-60, Developed Curves (Category: 3DCURVES) Layers 61-80, Reference Geometry (Category: DATUMS) Layers 81-100, Sheet Bodies (Category: SHEETS) Layers 101 - 120, Drafting Objects (Category: DRAFT) Layers 101 - 110, Drawing Borders (Category: FORMATS) Layers 12
31、1 - 130, Mechanism Tools (Category: MECH) Layers 131 - 150, FEM, Engineering Tools (Category: CAE) Layers 151 - 180, Manufacturing (Category: MFG) Layers 181 - 190, Quality Tools (Category: QA) Layers 201 - 250, Assembly Components (Category: COMPONENTS) How to Use This Manual It is important that y
32、ou use the Student Guide in the sequence presented. Later lessons assume you have learned concepts and techniques taught in earlier lessons. If necessary, you can always refer to any previous activity where a method or technique was originally taught. Always read the Cue and Status information while
33、 working through activities and as you perform your regular duties. The format of activities is consistent throughout this manual. Steps are labeled and specify what will be accomplished at any given point in the activity. Below each step are action bullets which detail individual actions that must
34、be taken to accomplish the step. As your knowledge of Unigraphics increases, the step text may become all that is needed to accomplish a given task. 14CAM Transition Student GuideEDS, All Rights Reserved Course Overview Step 1:This is an example of a step. This is an example of an action bullet. The
35、 general format for lesson content is: presentation activity Most lessons have one or more activities. summary For students who prefer more detail from an Instructor Led Course: ask questions confirm with restatement attend and pay attention to instruction as it is given. Obviously, it is always nec
36、essary for students to consider the classroom situation and be considerate of other students who may have greater or lesser needs for instruction. Instructors cannot possibly meet the exact needs of every student. At the start of each class day you will be expected to log onto your terminal, start U
37、nigraphics, and to be ready to follow the instructors curriculum. At the end of the days class you should always quit Unigraphics and log off the terminal. EDS, All Rights ReservedCAM Transition Student Guide15 How to Use This Manual Classroom System Information Your instructor will provide you with
38、 the following items for working in the classroom: Student Login: User name: Password: Work Directory: Parts Directory: Instructor: Date: 16CAM Transition Student GuideEDS, All Rights Reserved Course Overview Toolbar Information This section will help you to assure that your computer displays toolba
39、r arrangements designed to match the instructions in this manual. Step 1:If you have not already done so, use the classroom login information recorded on the previous page to log onto your computer and start Unigraphics. Step 2:Over any toolbar area, activate the mouse button 3 (MB3) popup menu. Step 3:From the MB3 menu, choose Customize. Step 4:On the Options page choose Small (16x16) icons. Step 5:On the Toolbar page choose Reset All. This will cause all toolbars to update to configurations designed for your class, or to the Unigraphics default for any toolbar not otherwise s
链接地址:https://www.31doc.com/p-3680383.html