【BS英国标准】BS EN 13864-2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns.pdf
《【BS英国标准】BS EN 13864-2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns.pdf》由会员分享,可在线阅读,更多相关《【BS英国标准】BS EN 13864-2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns.pdf(13页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13864:2004 Surfaces for sports areas Determination of tensile strength of synthetic yarns The European Standard EN 13864:2004 has the status of a British Standard ICS 97.150; 97.220.10 ? BS EN 13864:2004 This British Standard was published under the authority of the Standards
2、Policy and Strategy Committee on 14 July 2004 BSI 14 July 2004 ISBN 0 580 44089 3 National foreword This British Standard is the official English language version of EN 13864:2004. The UK participation in its preparation was entrusted to Technical Committee PRI/57, Surfaces for sports areas, which h
3、as the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section
4、entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compl
5、iance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related
6、 international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Am
7、endments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13864 July 2004 ICS 97.150; 97.220.10 English version Surfaces for sports areas - Determination of tensile strength of synthetic yarns Sols sportifs - Dtermination de la rsistance la traction
8、 des fibres synthtiques Sportbden - Bestimmung der Zugfestigkeit von synthetischen Garnen This European Standard was approved by CEN on 13 May 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status o
9、f a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A versi
10、on in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estoni
11、a, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOM
12、ITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13864:2004: E EN 13864:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and defi
13、nitions .4 4 Principle5 5 Apparatus and materials.5 5.1 Means of measuring tensile strength5 5.2 Means of measuring linear density of the pile6 5.3 Means of measuring width and thickness of test pieces 6 5.4 Material .6 6 Sampling and preparation of test pieces 6 6.1 Sampling.6 6.2 Preparation of te
14、st pieces.6 6.3 Conditioning and test conditions.7 7 Procedure .7 8 Calculation and expression of results.7 9 Test report8 Bibliography9 w w w . b z f x w . c o m EN 13864:2004 (E) 3 Foreword This document (EN 13864:2004) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas
15、”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. This
16、standard is based on ISO 2062 and ISO 5079, noting that synthetic turf fibres are not classical fibres and therefore have to be treated as both textile as well as plastics products. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are
17、 bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and
18、United Kingdom. w w w . b z f x w . c o m EN 13864:2004 (E) 4 1 Scope This European Standard describes two methods for the determination of the tensile properties of pile yarns in the construction of synthetic turf. Method A is used for determining the tensile properties of synthetic yarns taken fro
19、m packages prior to the manufacture of synthetic turf. Method B is used for determining the tensile properties of pile yarns from the manufactured synthetic turf. The results from the two methods are not comparable and method B is less accurate. 2 Normative references The following referenced docume
20、nts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 2062:1995, Textiles Yarns from packages Determination of single-end break
21、ing force and elongation at break (ISO 2062:1993) EN ISO 5079:1995, Textiles - Fibres Determination of breaking force and elongation at break of individual fibres (ISO 5079:1995) ISO 5893, Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specific
22、ation 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN ISO 2062:1995, EN ISO 5079:1995 and the following apply. 3.1 package length of yarn in a form suitable for use, handling or storage 3.2 initial length length of a test piece under specifie
23、d pre-tension, at the beginning of a test NOTE For a tensile test, the initial length is measured between the two effective clamping points and is expressed in millimetres. 3.3 breaking force maximum force applied to a test piece carried to rupture during a tensile test under specified conditions NO
24、TE 1 See A1 in Figure 1 NOTE 2 The breaking force is expressed in Newtons (N) or centiNewtons (cN) w w w . b z f x w . c o m EN 13864:2004 (E) 5 Elongation AB 1 22 A B1 A B Force Figure 1 Typical force/elongation curve 3.4 elongation at break elongation of a test piece produced by the breaking force
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS英国标准 【BS英国标准】BS EN 13864-2004 Surfaces for sports areas Determination of tensile strength synthetic BS
链接地址:https://www.31doc.com/p-3694709.html