07-30161352-DC.pdf
《07-30161352-DC.pdf》由会员分享,可在线阅读,更多相关《07-30161352-DC.pdf(28页珍藏版)》请在三一文库上搜索。
1、a Date: 22 August 2007 Origin: European Latest date for receipt of comments: 30 November 2007 Project no.: 2007/00165 Responsible committee: GEL/9/3 Fixed equipment Interested committees: Title: Draft BS EN 50345 Railway applications - Fixed installations - Electric traction - Insulat ing synthetic
2、rope assemblies for support of overhead contact lines Supersession information: If this document is published as a standard, the UK implementation of it will supersede BSEN50345 : 2004 and partially supersede. NONE If you are aware of a current national standard which may be affected, please notify
3、the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 30 November 2007. This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication. No
4、 acknowledgement will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for circulation within a nominating organization for briefing purp
5、oses. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email ordersbsi-. British, International and foreign standards are also available
6、 from BSI Customer Services. British Standards on CD or Online are available from British Standards Publishing Sales Limited. Tel: 01344 404409 or email bsonlinetechindex.co.uk. Information on the co-operating organizations represented on the committees referenced above may be obtained from the resp
7、onsible committee secretary. Cross-references The British Standards which implement International or European publications referred to in this draft may be found via the British Standards Online Service on the BSI web site http:/www.bsi-. Direct tel: 020 8996 7445 Responsible Committee Secretary: K
8、Seyde (BSI) E-mail: keith.seydebsi- Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 7.0 DPC: 07/30161352 DC Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:44:45 G
9、MT+00:00 2007, Uncontrolled Copy, (c) BSI b Introduction This draft standard is based on European discussions in which the UK took an active part. Your comments on this draft are welcome and will assist in the preparation of the consequent British Standard. If no comments are received to the contrar
10、y, then the UK will approve this draft and implement it as a British Standard. Comment is particularly welcome on national legislative or similar deviations that may be necessary. Even if this draft standard is not approved by the UK, if it receives the necessary support in Europe, the UK will be ob
11、liged to publish the official English Language text unchanged as a British Standard and to withdraw any conflicting standard. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to
12、 ensure that all comments receive efficient and appropriate attention by the responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover.
13、 Comments should be compatible with Version 6.0 or Version 97 of Microsoft Word for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as
14、given in the example below. Further information on submitting comments and how to obtain a blank electronic version of a comment form are available from the BSI web site at: http:/www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7)
15、 MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Note (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. A
16、mend to read . so that the mains connector to which no connection . 6.4 Paragraph 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks,
17、 and Windows is a trademark of Microsoft Corporation. Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:44:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Draft for Enquiry PROJET NORME EUROPENNE prEN 50345 EUROPISCHE NORM EUROPEAN STANDARD Aot 2007 CENELEC Comit
18、 Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung European Committee for Electrotechnical Standardization Secrtariat Central: rue de Stassart 35, B - 1050 Bruxelles 2007 CENELEC - Tous droits dexploitation sous quelque forme et de quelque manire que ce soit
19、rservs dans le monde entier aux membres du CENELEC. Projet: 20530 Ref. n prEN 50345:2007 F ICS 29.280 Destin remplacer EN 50345:2004 Version franaise Applications ferroviaires - Installations fixes - Traction lectrique - Montages mettant en oeuvre des cbles synthtiques pour le support des lignes ari
20、ennes de contact Bahnanwendungen - Ortsfeste Anlagen - Elektrischer Zugbetrieb - Kunststoffseile im Fahrleitungsbau Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines Le prsent projet de Norme Europenne est soum
21、is aux membres du CENELEC pour lenqute du CENELEC. Date limite du CENELEC: 2008-01-18. Il a t tabli par le CLC/SC 9XC. Si ce projet devient une Norme Europenne, les membres du CENELEC sont tenus de se soumettre au Rglement Intrieur du CEN/CENELEC, qui dfinit les conditions dans lesquelles doit tre a
22、ttribu, sans modification, le statut de norme nationale cette Norme Europenne. Le prsent projet de Norme Europenne a t tabli par le CENELEC en trois versions officielles (allemand, anglais,franais). Une version dans une autre langue faite par traduction sous la responsabilit dun membre du CENELEC da
23、ns sa langue nationale, et notifie au Secrtariat Central, a le mme statut que les versions officielles. Les membres du CENELEC sont les comits lectrotechniques nationaux des pays suivants: Allemagne, Autriche, Belgique, Bulgarie, Chypre, Danemark, Espagne, Estonie, Finlande, France, Grce, Hongrie, I
24、rlande, Islande, Italie, Lettonie, Lituanie, Luxembourg, Malte, Norvge, Pays-Bas, Pologne, Portugal, Rpublique Tchque, Roumanie, Royaume-Uni, Slovaquie, Slovnie, Sude et Suisse. Avertissement: Le prsent document nest pas une Norme Europenne. Il est diffus pour examen et observations. Il est suscepti
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 07 30161352 DC
链接地址:https://www.31doc.com/p-3726166.html