07-30160937-DC.pdf
《07-30160937-DC.pdf》由会员分享,可在线阅读,更多相关《07-30160937-DC.pdf(26页珍藏版)》请在三一文库上搜索。
1、a Date: 9 January 2007 Origin: International Latest date for receipt of comments: 30 April 2007 Project no.: 2007/00079 Responsible committee: GEL/3 Documentation and graphical symbols Interested committees: Title: Draft BS EN 62941 Industrial systems, installations and equipment and industrial prod
2、ucts - Labelling of conductors and cables Supersession information: If this document is published as a standard, the UK implementation of it will supersede NONE and partially supersede NONE . If you are aware of a current national standard which may be affected, please notify the secretary (contact
3、details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 30 April 2007. This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication. No acknowledgement will norm
4、ally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for circulation within a nominating organization for briefing purposes. Electronic circulati
5、on is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email ordersbsi-. British, International and foreign standards are also available from BSI Customer Service
6、s. British Standards on CD or Online are available from British Standards Publishing Sales Limited. Tel: 01344 404409 or email bsonlinetechindex.co.uk. Information on the co-operating organizations represented on the committees referenced above may be obtained from the responsible committee secretar
7、y. Cross-references The British Standards which implement International or European publications referred to in this draft may be found via the British Standards Online Service on the BSI web site http:/www.bsi-. Direct tel: 0208 996 7281 Responsible Committee Secretary: Mr S Bounds (BSI) E-mail: si
8、mon.boundsbsi- Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 6.1 DPC: 07/30160937 DC Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 00:43:42 GMT+00:00 2007, Uncont
9、rolled Copy, (c) BSI b Introduction This draft standard is based on international discussions in which the UK has taken an active part. Your comments on this draft are welcome and will assist in the preparation of the consequent standard. If no comments are received to the contrary, then the UK will
10、 approve this draft. There is a high probability that this text could be adopted by CENELEC as a reference document for harmonization or as a European Standard. Recipients of this draft are requested to comment on the text bearing in mind this possibility. UK Vote Please indicate whether you conside
11、r the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to ensure that all comments receive efficient and appropriate attention by the responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All com
12、ments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or Version 97 of Microsoft Word for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any com
13、ments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on submitting comments and how to obtain a blank electronic version of a comment form are available from the BSI web site
14、 at:http:/www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Note (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed chang
15、e by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which no connection . 6.4 Paragraph 2 te The use of the UV photometer as an alternative cannot be supported as serious probl
16、ems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation. Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 00:43:42 GMT+00:00 2007, Uncon
17、trolled Copy, (c) BSI FORM CD (IEC) 2002-08-08 3/834/CD COMMITTEE DRAFT (CD) IEC/TC or SC: 3 Project number IEC 62941 Ed. 1 Title of TC/SC: Information structures, documentation and graphical symbols Date of circulation 2007-01-12 Closing date for comments 2007-04-13 Also of interest to the followin
18、g committees TC16, TC17, TC44 Supersedes document 3/804/NP+3/827/RVN Functions concerned: Safety EMC Environment Quality assurance Secretary: Mr. Per-ke Svensson (Sweden) THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT SHOULD NOT BE USED FOR REFERENCE PURPOSES. RECIPIENTS OF THIS DOCUME
19、NT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION. Title: Industrial systems, installations and equipment and industrial products - Labelling of conductors and cables (Titre) : Systmes, installati
20、ons, appareils et produits industriels - Marquage des conducteurs et des cbles Introductory note The present draft is based on the original proposal, document 3/804/NP, modified with regard to the comments received on that, compiled in document 3/827/RVN, and on the discussion at the meeting of TC3
21、in Berlin. One of the important changes is that the term “marking” has been replaced by “labelling”. The draft has been further modified through commenting in PT35. As it was not included in the original proposal, and no consensus has been reached in PT 35 about the method to use page numbers (of th
22、e circuit diagram) as a basis for labelling, this has been described in an annex to the draft. The National Committees are specifically asked to comment on the use of his method. Copyright 2006 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this elec
23、tronic file, to make a copy and to print out the content for the sole purpose of preparing National Comittee positions. You may not copy or “mirror“ the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC. Licensed Copy: London Sou
24、th Bank University, London South Bank University, Thu Jan 18 00:43:42 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 3/834/CD - 2 - Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 00:43:42 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 62491 Ed. 1 IEC:2006 3 62491 Ed. 1
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 07 30160937 DC
链接地址:https://www.31doc.com/p-3726174.html