07-30162334-DC.pdf
《07-30162334-DC.pdf》由会员分享,可在线阅读,更多相关《07-30162334-DC.pdf(21页珍藏版)》请在三一文库上搜索。
1、a Date: 9 February 2007 Origin: International Latest date for receipt of comments: 31 May 2007 Project no.: 2007/00355 Responsible committee: PKW/0 Packaging Interested committees: Title: Draft BS ISO 29862 Self adhesive tapes Determination of peel adhesion properties Supersession information: If th
2、is document is published as a standard, the UK implementation of it will supersede NONE and partially supersede NONE . If you are aware of a current national standard which may be affected, please notify the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED
3、 AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 31 May 2007. This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on commenting. No copying is all
4、owed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for circulation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by com
5、mittee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email ordersbsi-. British, International and foreign standards are also available from BSI Customer Services. British Standards on CD or Online are available from British Standards P
6、ublishing Sales Limited. Tel: 01344 404409 or email bsonlinetechindex.co.uk. Information on the co-operating organizations represented on the committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement International or
7、European publications referred to in this draft may be found via the British Standards Online Service on the BSI web site http:/www.bsi-. Direct tel: 020 8996 7142 Responsible Committee Secretary: Miss Sarah Horsfield (BSI) E-mail: sarah.horsfieldbsi- Draft for Public Comment Head Office 389 Chiswic
8、k High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 6.1 DPC: 07/30162334 DC Licensed Copy: London South Bank University, London South Bank University, Fri Mar 02 00:46:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSI b Introduction This draft standard is base
9、d on international discussions in which the UK has taken an active part. Your comments on this draft are invited and will assist in the preparation of the consequent standard. Comments submitted will be reviewed by the relevant BSI committee before sending the consensus UK vote and comments to the i
10、nternational secretariat, which will then decide appropriate action on the draft and the comments received. If no comments are received to the contrary, then the UK will approve this draft. If the international standard is approved, it is possible the text will be published as an identical British S
11、tandard. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to ensure that all comments receive efficient and appropriate attention by the responsible BSI committee. Annotated dra
12、fts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or Version 97 of Microsoft Word for Windows, if possible; otherwise c
13、omments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on submitting comments and how to obtain a blank electronic version o
14、f a comment form are available from the BSI web site at:http:/www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Note (e.g. Table 1) Type of com- ment Comment
15、 (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which no connection . 6.4 Paragraph 2 te The use of the UV photometer as
16、 an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation. Licensed Copy: London South Bank University, London South Bank U
17、niversity, Fri Mar 02 00:46:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSI THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH. IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTAB
18、LE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS. International Organization for Standardization, 2007 DRAFT I
19、NTERNATIONAL STANDARD ISO/DIS 29862 Attributed to ISO/TMB by the Central Secretariat (see page iii) Voting begins on Voting terminates on 2007-01-31 2007-06-30 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION Self adhesive tapes Determination of peel adhesi
20、on properties Rubans auto-adhsifs Dtermination des caractristiques du pouvoir adhsif linaire ICS 83.180 FAST-TRACK PROCEDURE Licensed Copy: London South Bank University, London South Bank University, Fri Mar 02 00:46:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ISO/DIS 29862 PDF disclaimer This PDF
21、 file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein
22、the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PD
23、F-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Copyright notice This ISO doc
24、ument is a Draft International Standard and is copyright-protected by ISO. Except as permitted under the applicable laws of the users country, neither this ISO draft nor any extract from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photoc
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 07 30162334 DC
链接地址:https://www.31doc.com/p-3726176.html