07-30164993-DC.pdf
《07-30164993-DC.pdf》由会员分享,可在线阅读,更多相关《07-30164993-DC.pdf(24页珍藏版)》请在三一文库上搜索。
1、a Date: 20 April 2007 Origin: International Latest date for receipt of comments: 31 July 2007 Project no.: 2007/00978 Responsible committee: EPL/501 Electronic assembly technology Interested committees: Title: Draft BS EN 61249-2-37 ED.1 Materials for printed boards and other interconnecting structu
2、res - Part 2-37: Reinforced base materials clad and unclad - Modified non- halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly Supersession information: If this document is published as a standard, the UK implementati
3、on of it will supersede NONE and partially supersede. NONE If you are aware of a current national standard which may be affected, please notify the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 31
4、July 2007. This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BS
5、I except as permitted under the Copyright, Designs and Patent Act 1988 or for circulation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchas
6、ed from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email ordersbsi-. British, International and foreign standards are also available from BSI Customer Services. British Standards on CD or Online are available from British Standards Publishing Sales Limited. Tel: 01344 404409 or email bsonlin
7、etechindex.co.uk. Information on the co-operating organizations represented on the committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement International or European publications referred to in this draft may be foun
8、d via the British Standards Online Service on the BSI web site http:/www.bsi-. Direct tel: 020 8996 7205 Responsible Committee Secretary: Mr A Ashrafi (BSI) E-mail: asghar.ashrafibsi- Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)2
9、0 8996 7001 Form 36 Version 7.0 DPC: 07/30164993 DC Licensed Copy: London South Bank University, London South Bank University, Mon May 07 12:31:10 GMT+00:00 2007, Uncontrolled Copy, (c) BSI b Introduction This draft standard is based on international discussions in which the UK has taken an active p
10、art. Your comments on this draft are welcome and will assist in the preparation of the consequent standard. If no comments are received to the contrary, then the UK will approve this draft. There is a high probability that this text could be adopted by CENELEC as a reference document for harmonizati
11、on or as a European Standard. Recipients of this draft are requested to comment on the text bearing in mind this possibility. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to
12、 ensure that all comments receive efficient and appropriate attention by the responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover.
13、 Comments should be compatible with Version 6.0 or Version 97 of Microsoft Word for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as
14、given in the example below. Further information on submitting comments and how to obtain a blank electronic version of a comment form are available from the BSI web site at: http:/www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7)
15、 MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Note (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. A
16、mend to read . so that the mains connector to which no connection . 6.4 Paragraph 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks,
17、 and Windows is a trademark of Microsoft Corporation. Licensed Copy: London South Bank University, London South Bank University, Mon May 07 12:31:10 GMT+00:00 2007, Uncontrolled Copy, (c) BSI FORM CDV (IEC) 2005-09-23 91/659/CDV COMMITTEE DRAFT FOR VOTE (CDV) PROJET DE COMIT POUR VOTE (CDV) Project
18、number IEC 61249-2-37, Ed. 1 Numro de projet IEC/TC or SC: TC 91 CEI/CE ou SC: Secretariat / Secrtariat Japan Submitted for parallel voting in CENELEC Soumis au vote parallle au CENELEC Date of circulation Date de diffusion 2007-04-06 Closing date for voting (Voting mandatory for P-members) Date de
19、clture du vote (Vote obligatoire pour les membres (P) 2007-09-07 Also of interest to the following committees Intresse galement les comits suivants Supersedes document Remplace le document 91/658/NP Functions concerned Fonctions concernes Safety Scurit EMC CEM Environment Environnement Quality assur
20、ance Assurance qualit CE DOCUMENT EST TOUJOURS LTUDE ET SUSCEPTIBLE DE MODIFICATION. IL NE PEUT SERVIR DE RFRENCE. LES RCIPIENDAIRES DU PRSENT DOCUMENT SONT INVITS PRSENTER, AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES DROITS DE PROPRIT DONT ILS AURAIENT VENTUELLEMENT CONNAISSANCE ET FOURNIR UNE DOC
21、UMENTATION EXPLICATIVE. THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT SHOULD NOT BE USED FOR REFERENCE PURPOSES. RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMEN
22、TATION. Titre : Title : IEC 61249-2-37, Ed. 1: Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials clad and unclad Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad for lea
23、d-free assembly Note dintroduction Introductory note Ce CDV est diffus selon la procdure indique dans le doc. AC/8/2003 selon laquelle un NP est diffus en parallle avec son CDV. This CDV is issued in application of the procedure in AC/8/2003 for the simultaneous submission of a NP and its CDV. If th
24、e 91/658/NP is accepted, this CDV ballot will continue and the project will be considered as being at CDV stage. If the NP is not approved, CDV ballot will be cancelled. ATTENTION VOTE PARALLLE CEI CENELEC Lattention des Comits nationaux de la CEI, membres du CENELEC, est attire sur le fait que ce p
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 07 30164993 DC
链接地址:https://www.31doc.com/p-3726254.html