07-30170284-DC.pdf
《07-30170284-DC.pdf》由会员分享,可在线阅读,更多相关《07-30170284-DC.pdf(17页珍藏版)》请在三一文库上搜索。
1、a Date: 9 August 2007 Origin: International Latest date for receipt of comments: 30 November 2007 Project no.: 2007/02091 Responsible committee: GEL/210/12 EMC - Basic and generic standards Interested committees: Title: Draft CISPR 16-2-5 TR ed. 1: Specification for radio disturbance and immunity me
2、asuring apparatus and methods Part 2-5: In situ measurements for disturbing emissions produced by physically large equipment Supersession information: If this document is published as a standard, the UK implementation of it will supersede NONE and partially supersede. NONE If you are aware of a curr
3、ent national standard which may be affected, please notify the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 30 November 2007. This draft is issued to allow comments from interested parties; all co
4、mments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for cir
5、culation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email ordersbsi-. Brit
6、ish, International and foreign standards are also available from BSI Customer Services. British Standards on CD or Online are available from British Standards Publishing Sales Limited. Tel: 01344 404409 or email bsonlinetechindex.co.uk. Information on the co-operating organizations represented on th
7、e committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement International or European publications referred to in this draft may be found via the British Standards Online Service on the BSI web site http:/www.bsi-. Di
8、rect tel: 020 8996 7273 Responsible Committee Secretary: Mrs G D Salt (BSI) E-mail: geraldine.saltbsi- Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 7.0 DPC: 07/30170284 DC Licensed Copy: London South B
9、ank University, London South Bank University, Sat Aug 18 09:44:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI b Introduction This draft standard is based on international discussions in which the UK has taken an active part. Your comments on this draft are welcome and will assist in the preparation o
10、f the consequent standard. If no comments are received to the contrary, then the UK will approve this draft. There is a high probability that this text could be adopted by CENELEC as a reference document for harmonization or as a European Standard. Recipients of this draft are requested to comment o
11、n the text bearing in mind this possibility. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to ensure that all comments receive efficient and appropriate attention by the resp
12、onsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or Version 97 of Microsoft Word f
13、or Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on submitting comments and how to
14、 obtain a blank electronic version of a comment form are available from the BSI web site at: http:/www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Note (e.
15、g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which no connection . 6.4 Paragraph
16、 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation. Licensed Copy: London South
17、 Bank University, London South Bank University, Sat Aug 18 09:44:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI CISPR/H/161/DTR DRAFT TECHNICAL REPORT Project number CISPR TR 16-2-5 Ed.1 IEC/TC or SC CISPR/H Secretariat Denmark Distributed on 2007-07-27 Voting terminates on 2007-09-28 Also of interes
18、t to the following committees CISPR/A Supersedes document CISPR/H/151/CD and CISPR/H/160/CC Functions concerned Safety EMC Environment Quality assurance THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT SHOULD NOT BE USED FOR REFERENCE PURPOSES. RECIPIENTS OF THIS DOCUMENT ARE INVITED TO
19、SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION. Title CISPR 16-2-5 TR ed. 1: Specification for radio disturbance and immunity measuring apparatus and methods Part 2-5: In situ measurements for disturbing emissio
20、ns produced by physically large equipment This DTR was prepared by CISPR/H/WG04 with participation of experts of CISPR/A. FORM DTR (IEC) 2002-05-14 Copyright 2007 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this electronic file, to make a copy and
21、 to print out the content for the sole purpose of preparing National Committee positions. You may not copy or “mirror“ the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC. Licensed Copy: London South Bank University, London Sou
22、th Bank University, Sat Aug 18 09:44:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI CISPR 16-2-5/TR IEC:200X CISPR/H/161/DTR 2 CONTENTS 1 Scope.5 2 Normative references .5 3 Definitions Terms and abbreviations6 4 Methodology.7 4.1 Structure of each measurement.7 4.2 Preliminary measurements and selec
23、tion of measurement method 8 4.3 Selection of the EUT mode of operation and the reference point depending on the environment8 4.4 Assessment of measurement results .9 5 Method of measurement for in situ conducted emission10 5.1 General.10 5.2 Conducted emission measurement procedure .10 5.2.1 Refere
24、nce ground for in situ measurements.10 5.2.2 Disturbance voltage/current measurements on cables which carry wanted symmetrical signals .11 5.2.3 Disturbance voltage measurements on cables which do not carry wanted symmetrical signals .11 6 Method of measurement for in situ radiated emission .11 6.1
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 07 30170284 DC
链接地址:https://www.31doc.com/p-3726261.html