07-30175078-DC.pdf
《07-30175078-DC.pdf》由会员分享,可在线阅读,更多相关《07-30175078-DC.pdf(13页珍藏版)》请在三一文库上搜索。
1、a Date: 14 December 2007 Origin: European Latest date for receipt of comments: 31 March 2008 Project no.: 2007/03317 Responsible committee: ACE/6/-/3 Aerospace - Connectors Interested committees: Title: Draft BS EN 3660-020 Aerospace series - Cable outlet accessories for circular and rectangular ele
2、ctrical and optical connectors Part 020: Cable outlet, Style A, straight, unsealed with clamp strain re lief - Product standard Supersession information: If this document is published as a standard, the UK implementation of it will supersede NONE and partially supersede. NONE If you are aware of a c
3、urrent national standard which may be affected, please notify the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 31 March 2008. This draft is issued to allow comments from interested parties; all co
4、mments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for cir
5、culation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email ordersbsi-. Brit
6、ish, International and foreign standards are also available from BSI Customer Services. Information on the co-operating organizations represented on the committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement Intern
7、ational or European publications referred to in this draft may be found via the British Standards Online Service on the BSI web site http:/www.bsi-. Direct tel: 020 8996 7792 Responsible Committee Secretary: Mrs Sara Walton (BSI) E-mail: sara.waltonbsi- Draft for Public Comment Head Office 389 Chisw
8、ick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 7.0 DPC: 07/30175078 DC Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:13:33 GMT+00:00 2008, Uncontrolled Copy, (c) BSI b Introduction This draft standard is ba
9、sed on European discussions in which the UK has taken an active part. Your comments on this draft are welcome and will assist in the preparation of the consequent British Standard. If no comments are received to the contrary, then the UK will approve this draft and implement it as a British Standard
10、. Comment is particularly welcome on national, legislative or similar deviations that may be necessary. Even if this draft standard is not approved by the UK, if it receives the necessary support in Europe, the UK will be obliged to publish the official English Language text unchanged as a British S
11、tandard and to withdraw any conflicting standard. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to ensure that all comments receive efficient and appropriate attention by the
12、 responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or Version 97 of Microsoft W
13、ord for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on submitting comments and h
14、ow to obtain a blank electronic version of a comment form are available from the BSI web site at: http:/www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Not
15、e (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which no connection . 6.4 Para
16、graph 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation. Licensed Copy: London
17、South Bank University, London South Bank University, Wed Jan 02 02:13:33 GMT+00:00 2008, Uncontrolled Copy, (c) BSI prEN 3660-020 consensus draft DRAFT Edition: 2E _ Study No: C 2/GT 3 Draft No: 2E Date:25.10.2007 Step No: 10 _ _ Ref: _ Superseding Ref.: _1E_ UDC: 49. Descriptors: Aeronautical indus
18、try, aircraft equipment, accessories, electrical connection equipment, electrical connector, characteristics, outlet, backshells ENGLISH VERSION Cable outlet accessories for circular and rectangular electrical and optical connectors Part 020: Cable outlet, Style A, straight, unsealed with clamp stra
19、in relief - Product standard Srie arospatiale Accessoires arrieres pour connecteurs circulaires et rectangulaires lectriques et optiques Partie 020: Raccord droit non tanche type A avec brides serre-cable Norme de produit Luft- und Raumfahrt Endgehuse fr Elektrische und optische Rund- und Rechteck-
20、steckverbinder Teil 020: Endgehuse, Bauform A, gerade Ausfhrung, nicht abgedichtet, mit Zugentlastungsklemme - Produktnorm Master document: X en ?fr ? de Author: Germany Mr. Tim Ehlers e-mail: tehlersglenair.de _ THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES - STANDARDIZATION Gulledelle 94, B - 1
21、200 Bruxelles Tel.: (32) 2 775 81 17(23) Fax.: (32) 2 763 35 65 _ Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:13:33 GMT+00:00 2008, Uncontrolled Copy, (c) BSI Page 2 2nd draft prEN 3660-020 consensus draft 10/ 2007 Blank page Licensed Copy: London South B
22、ank University, London South Bank University, Wed Jan 02 02:13:33 GMT+00:00 2008, Uncontrolled Copy, (c) BSI Page 3 prEN 3660-020 consensus draft 10/2007 Contents 1. Scope and field of application 2. Normative references 3. Terminology 4. Characteristics 5. Identification 6. Marking 7. Technical spe
23、cification Warning This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard. . Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:13:33 GMT+00:
24、00 2008, Uncontrolled Copy, (c) BSI Page 4 2nd draft prEN 3660-020 consensus draft 10/ 2007 1 Scope This product standard defines a range of cable outlets, style A , straight, unsealed with clamp strain relief for use under the following conditions: Associated electrical connector(s) : EN 3660-002 T
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 07 30175078 DC
链接地址:https://www.31doc.com/p-3726329.html