ABMA-STD-19.1-1987-R1999.pdf
《ABMA-STD-19.1-1987-R1999.pdf》由会员分享,可在线阅读,更多相关《ABMA-STD-19.1-1987-R1999.pdf(65页珍藏版)》请在三一文库上搜索。
1、2595532 O079774 35T ANSUABMA 19.1 ADOPTION NOTICE ANSUABMA 19.1, “Tapered Roller Bearings - Radial Metric Design”, was adopted on 15 August 1995 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Industrial Supply Ce
2、nter, A”: DISC-EC, 700 Robbins Avenue, Philadelphia, FA 191 11- 5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094. The private sector and other Government agencies may purchase copies fr
3、om the American Bearing Manufacturers Association, Inc., 1200 19th Street, N.W., Suite 300, Washington, DC 20036-4303. - Custodians: Navy - AS Air Force - 99 Army - AT Adopting Activity: DLA-IS (Project 3 1 10-0968) AMSC NJA FSC3110 DISTRIBUT ION STATEMENT A. Approved for public release; distributio
4、n is unlimited. Copyright American Bearing Manufacturers Association Provided by IHS under license with ABMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/24/2007 09:38:50 MDTNo reproduction or networking permitted without license from IHS -,-,- 0871073 0001430 Tbf 9 _ - Co
5、pyright American Bearing Manufacturers Association, Inc., 1 987 These materials have been prepared by the American Bearing Manufacturers Association, Inc. However the information contained in these materials has not been independently verified by the American Bearing Manufacturers Association or inf
6、ormation Handling Services, Inc. Neither organization warrants or assumes any liability for the accuracy or completeness of these materials. Copyright American Bearing Manufacturers Association Provided by IHS under license with ABMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resal
7、e, 03/24/2007 09:38:50 MDTNo reproduction or networking permitted without license from IHS -,-,- o AFBMA 39.3 87 0873073 O000685 T49 ._. AMERICAN NATIONAL STANDARD AFBMASTANDARD TAPERED ROLLER BEARINGS - RADIAL METRIC DESIGN Approved October 19, 1987 tiOnal standards Idhite, Inc. 3 - ? -+ ANSVAFBMA
8、Std. 19.1-1987 Copyright American Bearing Manufacturers Association Provided by IHS under license with ABMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/24/2007 09:38:50 MDTNo reproduction or networking permitted without license from IHS -,-,- AFBMA 39.1 87 m 0873073 0000b
9、8b 985 m American Natiom Standard Approval of an American National Standard requires verification by ANSI that the reqUnements for due process, consensus, and other criteria for approval have been met by the standards developer. conswisiEf is established when, in tbejudpnt of the ANSI Board of Stand
10、ards Review. subsantial agreement has ken reached by directly and materially affected interests. Substantial agreement means much more than a simple majority. but not necessarily unanimity. Consensus requires that ail views and ObJeCtions be consided. and that a concaned effort be made toward heir m
11、olution. T h e use of Amricm National Stan- is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards o r not. f r o m manufacturing, marketing, purchasing, or using products. processes, o r procedures not conforming to the standards. The
12、 American N a t i o n a i Standads institute does not develop standards and will in no circumstances give an interpretation of any American Nationai Standard. Moreover. no person shall have the right o r authority to issue an interpretation o f an American National Standard in the name of the Americ
13、an Nationai Standards Institute. Requests for inter- pretations should be addmse to the secretariat o r sponsor whose name appears on the title page o f t h i s standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn a t any time. Tnie procedm o f the American N a t i o
14、 n a i Standards institute require that action be taken t o reaffirm, revise, o r withdraw this standard no later than five years fnnn the date of appipval. purchasers of American National Standards may receive ament informath an a standards by calling o r writing the American National Stan- dards I
15、nSntute. 3 li01 coansctiart Ave. N.W., Suite 7tW Copyright American Bearing Manufacturers Association Provided by IHS under license with ABMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/24/2007 09:38:50 MDTNo reproduction or networking permitted without license from IHS -
16、,-,- AFBMA 39.3 87 m O873073 0000b87 813 m FORWARD (This forward is not a part of American National Standard for Tapered Roller Bearings - Radial, Metric Design, ANSVAFBMA Standard 19.1) This new standard includes only information pertinent to tapered roller bearings designed in the metric system. S
17、imilar information for other types of bearings including thrust and radial tapered roller bearings in the inch design are covered in separate American National Standards. The boundary dimension tables of this standard contain the bearings in common use, selected from IS0 355, and bearings designed t
18、o meet anticipated future means. The various part numbering systems are explained and cross referenced in this stan- dard. Tolerances for boundary dimensions, and runouts, as well as recommended fitting practices for industrial and automotive applications, are provided. Copies of IS0 Standards conce
19、rning Rolling Contact Bearings (Ball and Roller Bear- ings) are available from the American National Standards Institute, Inc., 1430 Broad- way, New York, NY 10018. Suggestions for improvement of this standard gained through experience with its use will be welcomed. These should be sent to the Ameri
20、can National Standards Institute, Inc., 1430 Broadway, New York, NY 10018. The officers of Accredited Standards Committee B3 of the American National Stan- dards Institute and the organizations represented at the time this Standard was sub- mitted are as follows: S. R. Ahlman, Chairman G. T. Satterf
21、ield, Secretary American Society of Agricultural Engineers American Society of Lubrication Engineers Anti-Friction Bearings Manufacturers Association Hydraulic Institute National Machine Tool Builders Association Society of Automotive Engineers U.S. Department of Defense, DISC U.S. Department of the
22、 Navy Copyright American Bearing Manufacturers Association Provided by IHS under license with ABMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/24/2007 09:38:50 MDTNo reproduction or networking permitted without license from IHS -,-,- AFBMA $9*1 87 0873073 0000688 758 AFBM
23、A Standards for Ball and Roller Bearings and Balls 1 - Terminology 4 - Tolerance Definitions and Gaging Practices for Ball 69.50: 73.58t 76.50! 75.41; 76.N 80.791 80.10( 79.591 70.89: - 74.538 14“-20 15“-0644“ 16“-55-30“ l5“-06-34“ !lo-35 14“-25 20“-O 30“-O I2“-09 1 2“57-10 28“-48-39“ 12“-57-10“ 20“
24、-O 12“-50 15“-45 11“-55 11 “-30 16“-15 13“-52 15“-20 18“-04-30“ 15“-38-32“ 15“-38-32“ 21“-20 12O-22 12“-22 15“-25 19“-27-30“ 12“-51 30“-0 18“O 16“-41 12“-57-10“ 28“-48-39“ 12“-57-1 O“ 20“-O 11“-39 12“-49 15“-1 O 15O-0 1 lo-45 16“-33 12“-43-30“ 12“-35 14“O 9 Copyright American Bearing Manufacturers A
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ABMA STD 19.1 1987 R1999
链接地址:https://www.31doc.com/p-3728074.html