ABS-64-2006-E2008.pdf
《ABS-64-2006-E2008.pdf》由会员分享,可在线阅读,更多相关《ABS-64-2006-E2008.pdf(223页珍藏版)》请在三一文库上搜索。
1、 GUIDE FOR BUILDING AND CLASSING SUBSEA PIPELINE SYSTEMS MAY 2006 Guide to Color Coding Used in Online Version of the Rules The following summarizes the colors corresponding to Rule Changes, Corrigenda items and editorial changes in the Rules files which are available for download. Rule Changes: NOT
2、ICE NO. 1 November 2007 (effective 1 October 2007) NOTICE NO. 2 March 2008 (effective 1 January 2008) Corrigenda: CORRIGENDA/EDITORIALS 17 March 2008 Editorials: Editorial Changes Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resal
3、e, 08/07/2008 20:47:47 MDTNo reproduction or networking permitted without license from IHS -,-,- Guide for Building and Classing Subsea Pipeline Systems GUIDE FOR BUILDING AND CLASSING SUBSEA PIPELINE SYSTEMS MAY 2006 (Updated March 2008 see next page) American Bureau of Shipping Incorporated by Act
4、 of Legislature of the State of New York 1862 Copyright 2006 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:47:47 MDTNo reprodu
5、ction or networking permitted without license from IHS -,-,- Updates March 2008 consolidation includes: November 2007 version plus Notice No. 2, Corrigenda/Editorials November 2007 consolidation includes: May 2007 version plus Notice No. 1 Copyright American Bureau of Shipping Provided by IHS under
6、license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:47:47 MDTNo reproduction or networking permitted without license from IHS -,-,- ABS GUIDE FOR BUILDING AND CLASSING SUBSEA PIPELINE SYSTEMS . 2006 iii Foreword Foreword Foreword This Guide applies to classification of desig
7、n, construction and installation of offshore pipelines made of metallic materials, as well as the periodic surveys required for maintenance of classification. Serviceability of pipelines is also addressed, but only to the extent that proper functioning of the pipe and its components affects safety.
8、This Guide may also be used for certification or verification of design, construction and installation of pipelines. ABS will certify or verify design, construction and installation of offshore pipelines when requested by the Owner or mandated by government regulations to verify compliance with this
9、 Guide, a set of specific requirements, national standards or other applicable industry standards. If ABS certification or verification is in accordance with this Guide and covers design, construction and installation, then the pipeline is also eligible for ABS classification. This Guide has been wr
10、itten for worldwide application, and as such, the satisfaction of individual requirements may require comprehensive data, analyses and plans to demonstrate adequacy. This especially applies for pipelines located in frontier areas, such as those characterized by relatively great water depth or areas
11、with little or no previous operating experience. Conversely, many provisions of this Guide often can be satisfied merely on a comparative basis of local conditions or past successful practices. The Bureau acknowledges that a wide latitude exists as to the extent and type of documentation which is re
12、quired for submission to satisfy this Guide. It is not the intention of this Guide to impose requirements or practices in addition to those that have previously proven satisfactory in similar situations. Where available, design requirements in this Guide have been posed in terms of existing methodol
13、ogies and their attendant safety factors, load factors or permissible stresses that are deemed to provide an adequate level of safety. Primarily, the Bureaus use of such methods and limits in this Guide reflects what is considered to be the current state of practice in offshore pipeline design. At t
14、he same time, it is acknowledged that methods of design, construction and installation are constantly evolving. In recognition of these facts, the Guide specifically allows for such innovations and the Appendices are intended to reflect this. The application of this Guide by the Bureau will not seek
15、 to inhibit the use of any technological approach that can be shown to produce an acceptable level of safety. This ABS Guide is effective 1 May 2006 and supersedes the edition published in May 2005. Changes to Conditions of Classification (1 January 2008) For the 2008 edition, Chapter 1, “Scope and
16、Conditions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classification Offshore Units and Structures (Part 1) for all units, installations, vessels or systems in offshore service. The purpose of this consolidation was to emphasize the common applicabil
17、ity of the classification requirements in “Chapter 1” to ABS- classed offshore units, pipelines, risers, and other offshore structures, and thereby make “Conditions of Classification” more readily a common Rule of the various ABS Rules and Guides, as appropriate. Thus, Chapter 1 of this Guide specif
18、ies only the unique requirements applicable to subsea pipeline systems. These supplemental requirements are always to be used with the aforementioned Rules for Conditions of Classification Offshore Units and Structures (Part 1). Copyright American Bureau of Shipping Provided by IHS under license wit
19、h ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:47:47 MDTNo reproduction or networking permitted without license from IHS -,-,- This Page Intentionally Left Blank Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resa
20、le, 08/07/2008 20:47:47 MDTNo reproduction or networking permitted without license from IHS -,-,- ABS GUIDE FOR BUILDING AND CLASSING SUBSEA PIPELINE SYSTEMS . 2006 v Table of Contents GUIDE FOR BUILDING AND CLASSING SUBSEA PIPELINE SYSTEMS CONTENTS CHAPTER 1 Scope and Conditions of Classification (
21、Supplement to the ABS Rules for Conditions of Classification Offshore Units and Structures).1 Section 1 Applicability.3 Section 2 Classification Symbols and Notations.5 Section 3 Rules for Classification .7 Section 4 Documents to be Submitted .9 Section 5 Survey, Inspection and Testing 15 Section 6
22、Definitions.21 See also separately published booklet ABS Rules for Conditions of Classification Offshore Units and Structures (Part 1) CHAPTER 2 Materials and Welding.23 Section 1 Metallic Pipe25 Section 2 Piping Components and Pipe Coating29 Section 3 Welding of Pipes Piping Components 33 Section 4
23、 Corrosion Control35 CHAPTER 3 Design.37 Section 1 Design Requirements and Loads .41 Section 2 Geotechnical Conditions.51 Section 3 Environmental Effects.53 Section 4 Flow Assurance Analysis59 Section 5 Strength and Stability Criteria.61 Section 6 Pipeline Rectification and Intervention Design.69 Se
24、ction 7 Routing, Installation and Construction77 Section 8 Special Considerations for Pipe-in-Pipe Design.83 Section 9 Special Considerations for Pipeline Bundle Design.85 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ABS 64 2006 E2008
链接地址:https://www.31doc.com/p-3729521.html