《A-A-59326-8A-2003.pdf》由会员分享,可在线阅读,更多相关《A-A-59326-8A-2003.pdf(4页珍藏版)》请在三一文库上搜索。
1、INCH-POUND A-A-59326/8A May 1, 2003 SUPERSEDING A-A-59326/8 September 25, 1998 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COUPLING HALF, FEMALE BY FLANGE, TYPE VIII (TTMA) The General Services Administration has authorized the use of this commercial item description specification sheet, for all
2、 federal agencies. The complete requirements for procuring couplings described herein shall consist of this document and the latest issue in effect of A-A-59326A. 1. SCOPE. This specification covers a female by flange coupling halve to be used in conjunction with a male cam lock type coupling. 2. CL
3、ASSIFICATION. The size of the coupling halves is designated in table 1. TABLE 1. Coupling half size. Dash No. Cam-Lock Nom. Size Flange Nom. Size Dimension C Gasket Reqd. 1 2 2 -6 2 2 2 -7 3 3 3 -8 4 4 4 5.25 -9 5 6 6 6.125 -10 6 2 4 -6 7 1 2 -3 8 2 3 -6 9 3 4 5.25 -8 Sizes are in inches Beneficial
4、comments, recommendations, additions, deletions, clarifications, etc., and any other data which may improve this document should be sent by letter to: US Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-D/210, 6501 E. 11 Mile Road, Warren, MI 48397-5000. AMSC N/A FSC 4730 DISTRIBUTION STAT
5、EMENT A. Approved for public release; distribution is unlimited. A-A-59326/8A 2 FLANGED INTERFACE (SEE A-A-59326A) CAM-LOCK INTERFACE (SEE A-A-59326A) C MIN GASKET (SEE A-A-59326A) PULL RINGS FIGURE 1. Coupling half. A-A-59326/8A 3 3. SALIENT CHARACTERISTICS. The following characteristics differ fro
6、m those listed in A-A-59326A. 3.1 Hydrostatic test pressure. The -inch through 6-inch couplings shall withstand a hydrostatic test pressure of 300 pounds per square inch gage (psig). The 6-inch, 75 psi rated couplings shall withstand a hydrostatic test pressure of 150 psig. 3.2 Working pressure. The
7、 -inch through 4-inch couplings shall be rated for 150 pounds per square inch working pressure. The 6-inch couplings shall be rated for 75 psi or 150 psi working pressure as appropriate. 3.3 Accessories. The coupling shall be supplied with pull rings and gasket indicated. 4. NOTES. 4.1. Part Identif
8、ication Number (PIN). The following PIN procedure is for government purposes and does not constitute a requirement for the contractor. This example describes a part numbering system for a specification sheet A-A-59326/8A AA59326/8-3-SS-1; /8 indicates a Female by Flange Type VIII (TTMA) Coupling Hal
9、f; -3 indicates a 3-inch nominal cam lock end; SS indicates a stainless steel body; and -1 indicates a style 1 coupling. Material: A - Aluminum B - Copper Alloy (Brass or Bronze) BA - Aluminum Bronze SS - Stainless Steel Style 1 - Style 1 couplings do not require the incorporation of a positive lock
10、ing mechanism to lock the cam arms in the closed position but the cam arms will stay in the closed position when the coupling halves are assembled. Style 2 - Style 2 couplings will incorporate a positive locking mechanism to lock the cam arms in the closed position when the coupling halves are assem
11、bled. The locking mechanism will be manually released (the release doesnt have to stay in the released position) before the cam arms can be moved to the open position. 4.2. International standardization. Certain provisions of this specification (dimensions) are the subject of international standardization agreement (see A-A-59326A). A-A-59326/8A 4 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA-FSS Custodians: Preparing Activity: Army - AT Army - AT Navy - YD Air Force 99 (Project 4730-2029-008) Review Activities: Army - AV, GL Navy - MC, SH Air Force - 71 DLA - CC
链接地址:https://www.31doc.com/p-3729537.html