ANSI-B11.2-1995-R2005.pdf
《ANSI-B11.2-1995-R2005.pdf》由会员分享,可在线阅读,更多相关《ANSI-B11.2-1995-R2005.pdf(73页珍藏版)》请在三一文库上搜索。
1、 ANSI B11.2-1995 (R2005) American National Standard for Machine Tools Hydraulic Power Presses Safety Requirements for Construction, Care, and Use Secretariat and Accredited Standards Developer: AMT - The Association For Manufacturing Technology 7901 Westpark Drive McLean, VA 22102 Approved: February
2、 13, 1995. Reaffirmed: March 11, 2005 by the American National Standards, Inc. AMERICAN NATIONAL STANDARDS By approving this American National Standard, the ANSI Board of Standards Review confirms that the requirements for due process, consensus, balance and openness have been met by AMT The Associa
3、tion For Manufacturing Technology (the ANSI-accredited standards developing organization). American National Standards are developed through a consensus process. Consensus is established when substantial agreement has been reached by directly and materially affected interests. Substantial agreement
4、means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward resolution. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topi
5、c covered by this publication. While AMT administers the process and establishes procedures to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate or verify the accuracy or completeness of any information or the soundness of a
6、ny judgments contained in its standards or guidelines. American National Standards are promulgated through ANSI for voluntary use; their existence does not in any respect preclude anyone, whether they have approved the standards or not, from manufacturing, marketing, purchasing, or using products, p
7、rocesses, or procedures not conforming to the standards. However, users, distributors, regulatory bodies, certification agencies and others concerned may apply American National Standards as mandatory requirements in commerce and industry. The American National Standards Institute does not develop s
8、tandards and will in no circumstances give an interpretation of an American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations shou
9、ld be addressed to the Secretariat (AMT). AMT MAKES NO WARRANTY, EITHER EXPRESSED OR IMPLIED AS TO THE FITNESS OF MERCHANTABILITY OR ACCURACY OF THE INFORMATION CONTAINED WITHIN THIS STANDARD, AND DISCLAIMS AND MAKES NO WARRANTY THAT THE INFORMATION IN THIS DOCUMENT WILL FULFILL ANY OF YOUR PARTICUL
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ANSI B11 1995 R2005
链接地址:https://www.31doc.com/p-3729604.html