ACI-SP-15-2005.pdf
《ACI-SP-15-2005.pdf》由会员分享,可在线阅读,更多相关《ACI-SP-15-2005.pdf(35页珍藏版)》请在三一文库上搜索。
1、American Concrete Institute“ Advancing concrete knowlege FIELD REFERENCE MANUAL Specifications for Structural Concrete AC1 301-05 with selected AC1 references PUBLICATION SP-15 (05) American Concrete Institute, Farmington Hills Copyright American Concrete Institute Provided by IHS under license with
2、 ACI Licensee=Aramco HQ/9980755100 Not for Resale, 03/18/2007 08:48:10 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright O 2005 American Concrete Institute P.O. Box 9094 Farmington Hills, MI 48333-9094 All rights reserved including rights of reproduction and use in
3、any form or by any means, including the making of copies by any photo process, or by any electronic or mechanical device, printed, written, or oral, or recording for sound or visual reproduction or for use in any knowledge or retrieval system or device, unless permission in writing is obtained from
4、the copyright proprietors. Printed in the United States of America November 2005 ISBN: 0-87031-194-8 Library of Congress Control Number: 2005935052 Copyright American Concrete Institute Provided by IHS under license with ACI Licensee=Aramco HQ/9980755100 Not for Resale, 03/18/2007 08:48:10 MDTNo rep
5、roduction or networking permitted without license from IHS -,-,- Contents 1 51 125 149 179 217 237 253 275 29 1 369 40 1 443 463 487 519 559 Specifications for Structural Concrete Cement and Concrete Terminology Standard Specifications for Tolerances for Concrete Construction and Materials and Comme
6、ntary Chemical Admixtures for Concrete Guide for Structural Lightweight-Aggregate Concrete Evaluation of Strength Test Results of Concrete Guide for Obtaining Cores and Interpreting Compressive Strength Results Causes, Evaluation and Repair of Cracks in Concrete Structures Controlled Low-Strength Ma
7、terials Guide for Concrete Floor and Slab Construction Guide to Cast-In-Place Architectural Concrete Practice Guide for Measuring, Mixing, Transporting, and Placing Concrete Hot Weather Concreting Cold Weather Concreting Guide to Curing Concrete Guide for Consolidation of Concrete Building Code Requ
8、irements for Structural Concrete (Chapters 3-7) 619 65 1 Guide to Formwork for Concrete Design Responsibility for Architectural Precast-Concrete Projects AC1 301-05 AC1 11 6R-00 AC1 1 17/117R-90 (Reapproved 2002) AC1 212.3R-04 AC1 213R-O3 AC1 2 14R-02 AC1 214.4R-O3 AC1 224.1R-93 (Reapproved 1998) AC
9、1 229R-99 (Reapproved 2005) AC1 302. IR-04 AC1 303R-O4 AC1 304R-00 AC1 305R-99 AC1 306R-88 (Reapproved 2002) AC1 308R-01 AC1 309R-96 AC1 3 18-05 AC1 347-04 AC1 533.1R-02 Copyright American Concrete Institute Provided by IHS under license with ACI Licensee=Aramco HQ/9980755100 Not for Resale, 03/18/2
10、007 08:48:10 MDTNo reproduction or networking permitted without license from IHS -,-,- AC1 301-05 Specifications for Structural Concrete An AC1 Standard Reported by AC1 Committee 301 W. Calvin McCall Chair Colin L. Lobo Secretary Jon B. Ardahl Domingo J. Carreira* Oleh B. Ciuk Steven R. Close* D. Ge
11、ne Daniel James E. Anderson Ramon L. Carrasquillo Paul A. Decker Dan Elleryt Alphonse E. Engelman Thomas M. Greene Jeffrey W. Coleman Steven H. Gebler Marwan A. Daye Clifford Gordont Mario R. Diaz James A. Famy* W. Bryant Frye Richard D. Gaynor David P. Gustafson* Jerry A. Holland Roy H. Keck* James
12、 A. Lee Voting Subcommittee Members Gene Hightower G. Michael Robinson Narendra V. Jadhav Michael L. Leming Edward D. Russell Mehmet A. Samee William M. Klorman Mark A. Payne Kenneth B. Rear W. Thomas Scott William C. Sherman Douglas J. Sordyl Consulting Members Gilbert J. Haddad Ross S. Martin Atil
13、ano Lamana Bryant Mathat *Subcommittee chair. tDeceased. This specijcation is a Reference Specijicution that the Engineer or Archi- tect can make applicable to any construction project by citing it in the Project Specijications. The ArchitecdEngineer supplements the provisions of this Reference Spec
14、ijication as needed by designating or specifying indi- vidual project requirements. The documeni covers materials and proportioning of concrete; reinforc- ing and prestressing steels; production, placing, finishing, and curing of concrete; and formwork design and construction. Methods o f treatment
15、of joints and embedded items, repair of surface defecis, and finishing of formed und unformed surfaces are specified. Separate sections are devoted to architectural concrete, lightweight concrete, mass concrete, prestressed concrete, and shrinkage-compensating concrete. Provisions governing test- in
16、g, evaluation, and acceptance o f concrete as well as acceptance of the structures are included. Keywords: admixture; aggregate; air entrainment; architecturai concrete; cement; cementitious materials; cold weather; compressive strength; concrete; concrete construction; concrete durability; concrete
17、 slab; consoli- dation; conveyor; curing; density; exposed-aggregate finish; finish; floors; formwork; grout; grouting; hot-weather; inspection; joint (construction, contraction, and isolation); lightweight concrete; mix; mixture proportion; placing; prestressed concrete; prestressing steel; reinfor
18、ced concrete; rein- forcement; repair; reshonng; shoring; shrinkage-compensating concrete; specification; subgrade; temperature; test; tolerance; water-cementitious material ratio; welded wire reinforcement. David K. Maxwell Timothy L. Moore Jerry Pames Aimee Pergalsky James M. Shilstone, Sr. Daniel
19、 J. Stanley BNCe A. Suprenant Robert L. Teerman Michael A. Whisonant Michelle L. Wilson Richard M. Wing Joseph A. McElroy Carlos Videla NOTES TO SPECIFIER This specification is incorporated by reference in the project specifications using the wording in P3 of the preface and including the informatio
20、n from the mandatory, optional, and submittal checklists following the specification. PR E FAC E P1. AC1 Specification 301 is intended to be used by refer- ence or incorporation in its entirety in the Project Specifica- tion. Do not copy individual Parts, Sections, Articles, or Paragraphs into the P
21、roject Specification, because taking them out of context may change their meaning. P2. If Sections or Parts of AC1 Specification 301 are copied into the Project Specification or any other document, AC1 301-05 supersedes AC1 301-99 and became effective April 20,2005. Copyright O 2005, American Concre
22、te Institute. All rights reserved including rights of reproduction and use in any form or by any means, including the making of copies by any photo process, or by electronic or mechanical device, printed, written, or oral, or recording for sound or visual reproduc- tion or for use in any knowledge o
23、r retrieval system or device, unless permission in writing is obtained from the copyright proprietors. 1 Copyright American Concrete Institute Provided by IHS under license with ACI Licensee=Aramco HQ/9980755100 Not for Resale, 03/18/2007 08:48:10 MDTNo reproduction or networking permitted without l
24、icense from IHS -,-,- 2 AC1 301 FIELD REFERENCE MANUAL do not refer to them as an AC1 Specification, because the specification has been altered. P3. A statement such as the following will serve to make AC1 Specification 301 a part of the Project Specification: “Work on (Project Title) shall conform
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ACI SP 15 2005
链接地址:https://www.31doc.com/p-3729661.html