AS-NZS-60898.1-2004.pdf
《AS-NZS-60898.1-2004.pdf》由会员分享,可在线阅读,更多相关《AS-NZS-60898.1-2004.pdf(141页珍藏版)》请在三一文库上搜索。
1、AS/NZS 60898.1:2004 Australian/New Zealand Standard Electrical accessoriesCircuit-breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD) AS/NZS 60898.1:2004 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on
2、 05 Sep 2008 AS/NZS 60898.1:2004 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee EL-004, Electrical Accessories. It was approved on behalf of the Council of Standards Australia on 25 June 2004 and on behalf of the Council of Standards New Zealand on 9 July 2004.
3、This Standard was published on 13 August 2004. The following are represented on Committee EL-004: Australasian Railway Association Australian Chamber of Commerce and Industry Australian Electrical and Electronic Manufacturers Association Canterbury Manufacturers Association, New Zealand Consumer Ele
4、ctronic Suppliers Association Ministry of Economic Development (New Zealand) National Electrical and Communications Association Plastics Industry Pipe Association of Australia Regulatory Authorities (Electrical) Telarc New Zealand Testing Interests (Australia) Keeping Standards up-to-date Standards
5、are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themse
6、lves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about joint Australian/New Zealand Standards can be found by visiting the Standards Web Shop at .au or Standards New Zealand web site at ww
7、w.standards.co.nz and looking up the relevant Standard in the on-line catalogue. Alternatively, both organizations publish an annual printed Catalogue with full details of all current Standards. For more frequent listings or notification of revisions, amendments and withdrawals, Standards Australia
8、and Standards New Zealand offer a number of update options. For information about these services, users should contact their respective national Standards organization. We also welcome suggestions for improvement in our Standards, and especially encourage readers to notify us immediately of any appa
9、rent inaccuracies or ambiguities. Please address your comments to the Chief Executive of either Standards Australia International or Standards New Zealand at the address shown on the back cover. This Standard was issued in draft form for comment as DR 04122. Accessed by UNIVERSITY OF SOUTH AUSTRALIA
10、 on 05 Sep 2008 AS/NZS 60898.1:2004 Australian/New Zealand Standard Electrical accessoriesCircuit-breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD) COPYRIGHT Standards Australia/Standards New Zeal
11、and All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher. Jointly published by Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001 and
12、 Standards New Zealand, Private Bag 2439, Wellington 6020 ISBN 0 7337 3575 4 Originated as AS/NZS 4898:1997. Jointly revised and redesignated as AS/NZS 60898.1:2004. Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 05 Sep 2008 ii PREFACE This Standard was prepared by the Joint Standards Australia/Standa
13、rds New Zealand Committee EL-004, Electrical Accessories to supersede AS/NZS 4898:1997, Approval and test specificationCircuit-breakers for overcurrent protection for household and similar installations, from the date of publication. This Standard forms the first edition of AS/NZS 60898-1, Electrica
14、l accessoriesCircuit- breakers for overcurrent protection for household and similar installations Part 1: Circuit- breakers for a.c. operation. This Standard is to be used in conjunction with the appropriate Part 2, which contains clauses that supplement or modify the corresponding clauses in Part 1
15、, to provide the relevant requirements for the appropriate type of product. The objective of this Standard is to provide Australian and New Zealand electrical industries, manufacturers and regulatory bodies with safety general requirements for circuit-breakers for a.c. operation, and which may be us
16、ed as the bases for approval for sale or for connection to supply in Australia and New Zealand. This Standard is an adoption with national modifications and has been reproduced from, IEC 60898-1, Ed. 1.2 (2003), Electrical accessoriesCircuit-breakers for overcurrent protection for household and simi
17、lar installations Part 1: Circuit-breakers for a.c. operation which includes Amendment 1:2002 and Amendment 2:2003. Variations to IEC 60898-1 to take account of Australian/New Zealand conditions are indicated at the appropriate places throughout this standard. Strikethrough (example) identifies IEC
18、text, tables and figures which, for the purposes of this Australian/New Zealand Standard, are deleted. Where text, tables or figures are added, each is set in its proper place and identified by shading (example). Added figures are not themselves shaded, but are identified by a shaded border. Variati
19、ons made to IEC 60898-1 form the Australian/New Zealand variations for the purposes of the CB scheme for recognition of testing to standards for safety of electrical equipment. These variations have been incorporated in the body of the standard. They are listed in Annex ZZ for easy reference. This S
20、tandard will exist in parallel with AS/NZS 3111, Approval and test specification Miniature overcurrent circuit-breakers (and any revisions thereof). Both this Standard and AS/NZS 3111 are acceptable for miniature overcurrent circuit-breakers. The essential safety requirements in AS/NZS 3820 that cou
21、ld be applicable to miniature circuit- breakers are covered by this Standard taken in conjunction with any other relevant requirements affecting safety. The terms normative and informative are used to define the application of the annex to which they apply. A normative annex is an integral part of a
22、 standard, whereas an informative annex is only for information and guidance. In this Standard, the following print types are used: requirements proper: in arial type; test specifications: in italic type; explanatory matter: in smaller arial type. As this Standard is reproduced from an International
23、 Standard, the following applies: (a) Its number does not appear on each page of text and its identity is shown only on the cover and title page. (b) In the source text IEC 60898 should read AS/NZS 60898. (c) A full point should be substituted for a comma when referring to a decimal marker. Accessed
24、 by UNIVERSITY OF SOUTH AUSTRALIA on 05 Sep 2008 iii The numbering of clauses, subclauses, notes, tables, figures and annexes follows that of IEC 60898-1. To allow for additional material to be introduced by Australia and New Zealand, the numbers 201 to 300 are used to number further clauses, subcla
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AS NZS 60898.1 2004
链接地址:https://www.31doc.com/p-3730191.html