ASAE-S482-2004.pdf
《ASAE-S482-2004.pdf》由会员分享,可在线阅读,更多相关《ASAE-S482-2004.pdf(3页珍藏版)》请在三一文库上搜索。
1、S T A N D A R D ASABE is a professional and technical organization, of members worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, and biological systems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural an
2、d Biological Engineers to meet standardization needs within the scope of the Society; principally agricultural fi eld equipment, farmstead equipment, structures, soil and water resource management, turf and landscape equipment, forest engineering, food and process engineering, electric power applica
3、tions, plant and animal environment, and waste management. NOTE: ASABE Standards, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged in industry or trade is entirely voluntary. The ASABE assumes no responsibility for results attrib- utable to the applica
4、tion of ASABE Standards, Engineering Practices, and Data. Conformity does not ensure compliance with applicable ordinances, laws and regulations. Prospective users are responsible for protecting themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Dat
5、a initially approved prior to the society name change in July of 2005 are designated as ASAE, regardless of the revision approval date. Newly developed Standards, Engineering Practices and Data approved after July of 2005 are designated as ASABE. Standards designated as ANSI are American National St
6、andards as are all ISO adoptions published by ASABE. Adoption as an American National Standard requires verifi cation by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of
7、Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made tow
8、ard their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revised or withdrawn at any time. Additionally, procedures of ASABE require that action be taken periodically to reaffi rm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. Al
9、l rights reserved. ASABE, 2950 Niles Road, St. Joseph, MI 49085-9659, USA ph. 269-429-0300, fax 269-429-3852, hqasabe.org ASAE S482 FEB04 DrawbarsAgricultural Wheel Tractors ASAE S482 FEB04 DrawbarsAgricultural Wheel Tractors Proposed by the Equipment Manufacturers Institute; approved by the ASAE Tr
10、actor Committee; approved by the Power and Machinery Division Standards Committee; adopted by ASAE March 1994; reaffi rmed and revised editorially December 1998; revised editorially March 1999; reaffi rmed February 2004. 1 Purpose and scope 1.1 This Standard provides dimensions and vertical static l
11、oad limits for drawbars of agricultural wheel type tractors. 1.1.1 To facilitate interchangeability of towed implements and wheeled type tractors within established power categories. 1.1.2 To facilitate interchangeability of drawbar attachments such as drawbar extenders and safety chain attachments.
12、 1.1.3 To provide limits for vertical static loads imposed by towed implements. 1.1.4 To provide dimensions relating the drawbar to the tractor power take-off shaft. 1.2 Dimensions comprising the standard specifi cations are divided into four categories: CategoryMaximum drawbar power kW (P) I1535 II
13、30100 III60170 IV135300 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements bas
14、ed on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Standards organizations maintain registers of currently valid standards. ANSI/ASAE S338.2 JUL93, Safety Chain for Towed Equipment ASAE S203.13 MAR94, Front and Rea
15、r Power Take-Off for Agricultural Tractors ASAE S207.12 MAR94, Operating Requirements for Tractors and Power Take-Off Driven Implements ASAES217.11Three-PointFree-LinkAttachmentforHitching Implements to Agricultural Wheel Tractors SAE J711 MAR91, Tire Selection Tables for Agricultural Machines of Fu
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASAE S482 2004
链接地址:https://www.31doc.com/p-3730249.html