AS-3711.6-2000.pdf
《AS-3711.6-2000.pdf》由会员分享,可在线阅读,更多相关《AS-3711.6-2000.pdf(33页珍藏版)》请在三一文库上搜索。
1、AS 3711.62000 Australian Standard Freight containers Part 6: Tank containers Modifi ed and including the full text of ISO 1496-3:1995 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 27 Feb 2009 This Australian Standard was prepared by Committee ME/68, Freight Containers. It was approved on behalf of th
2、e Council of Standards Australia on 31 August 1999 and published on 24 January 2000. The following interests are represented on Committee ME/68: Australasian Railway Association Australian Chamber of Shipping Australian Maritime Safety Authority AUSTROADS Department of Defence (Australia) Germanisch
3、er Lloyd National Freight Forwarders Association National Road Transport Commission Keeping Standards up-to-date Standards are living documents which refl ect progress in science, technology and systems To maintain their currency, all Standards are periodically reviewed, and neweditionsarepublished.
4、Betweeneditions,amendmentsmaybeissued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about Standards can be fo
5、und by visiting the Standards Australia web site at .au and looking up the relevant Standard in the on-line catalogue. Alternatively, the printed Catalogue provides information current at 1 January each year, and the monthly magazine, The Australian Standard, has a full listing of revisions and amen
6、dments published each month. We also welcome suggestions for the improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Contact us via email at mail .au, or write to the Chief Executive, Standards AustraliaInternational Lt
7、d. POBox 1055, Strathfi eld., NSW 2135. This Standard was issued in draft form for comment as DR 98594. Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 27 Feb 2009 AS 3711.62000 Australian Standard Freight containers Part 6: Tank containers Originated as AS 17271975 and AS 25531982. Final edition AS/NZ
8、S 3711.6:1993. Revised and designated AS 3711.62000. COPYRIGHT Standards Australia International All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher. P
9、ublished by Standards Australia International Ltd PO Box 1055, Strathfield, NSW 2135, Australia ISBN 0 7337 2936 3 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 27 Feb 2009 ii PREFACE This Standard was prepared by the Standards Australia Committee ME/68, Freight Containers to supersede AS/NZS 3711.6:
10、1993. It has been adopted with national modifi cations and has been reproducedfromISO1496-3:1995,Series1freight containersSpecifi cationandtesting, Part 3: Tank containers for liquids, gases and pressurized dry bulk. This Standard is Part 6 in the AS or AS/NZS 3711, Freight containers series. The se
11、ries comprises AS 3711.1 Part 1: Classifi cation, dimensions and ratings AS/NZS 3711.2Part 2: Terminology AS/NZS 3711.3 Part 3: Corner fi ttings AS/NZS 3711.4Part 4: General purpose containers AS 3711.5Part 5: Thermal containers AS 3711.6Part 6: Tank containers AS/NZS 3711.7Part 7: Dry bulk containe
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AS 3711.6 2000
链接地址:https://www.31doc.com/p-3730644.html