BS-2064-3-1990 ISO-6105-1988.pdf
《BS-2064-3-1990 ISO-6105-1988.pdf》由会员分享,可在线阅读,更多相关《BS-2064-3-1990 ISO-6105-1988.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 2064-3: 1990 ISO 6105:1988 Diamond abrasive products Part 3: Dimensions of steel blades for segmented saws for cutting of stone and masonry UDC 621.921.34:669.1:62 253.5 (083.3):621.93.025.7:621.93.026.23:693.21 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 28 13:51:34 GMT+
2、00:00 2006, Uncontrolled Copy, (c) BSI BS 2064-3:1990 This British Standard, having been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on 31 January 1990 BSI 12-1999 The fo
3、llowing BSI references relate to the work on this standard: Committee reference MTE/10 Draft for comment 77/56412 DC ISBN 0 580 18126 X Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machine, Engineers and Hand Tools Standards Policy Co
4、mmittee (MTE/-) to Technical Committee MTE/13, upon which the following bodies were represented: Abrasive Industries Association Advanced Manufacturing Technology Research Institute British Abrasive Federation British Compressed Air Society British Steel Industry Health and Safety Executive Hire Ass
5、ociation Europe Trades Union Congress Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 28 13:51:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 2064-3:1990 BSI 12-1999i Contents Page Committees responsibleInside front cover Nation
6、al forewordii 1Scope and field of application1 2References1 3Dimensions1 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 28 13:51:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 2064-3:1990 ii BSI 12-1999 National foreword This Part of BS 2064 has been prepared under the direction of the Machin
7、e, Engineer, and Hand Tools Standards Policy Committee and is identical with ISO 6105 “Abrasive products Segmented saws for machining of stone and masonry cutting Dimensions of steel blades”, published by the International Organization for Standardization (ISO). Additional information. In clause 1,
8、reference is made to the material cubic boron nitride. This is incorrect and should be ignored. Cubic boron nitride is not a material used in the manufacture of saws. The ISO Technical Committee responsible for preparing this standard has acknowledged the error and will issue an amendment in due cou
9、rse. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International Stand
10、ardCorresponding British Standard ISO 6104:1979BS 5831:1979 Specification for designation and multilingual nomenclature for diamond or cubic boron nitride grinding wheels and saws (Identical) ISO 6106:1979BS 5851:1980 Specification for grain sizes of diamond or cubic boron nitride (Identical) Summar
11、y of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy
12、: sheffieldun sheffieldun, na, Tue Nov 28 13:51:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 2064-3:1990 BSI 12-19991 1 Scope and field of application This International Standard lays down the dimensions of steel blades of diamond or cubic boron nitride saws, the multilingual nomenclature and di
13、mensional designation of which are specified in ISO 6104. These saws are principally used for cutting stone and masonry. The diamond or cubic boron nitride concentration and the grain size of the diamond section of the saws shall be specified in conformity with ISO 6104 and ISO 6106 respectively. 2
14、References ISO 6104, Abrasive products Diamond or cubic boron nitride grinding wheels and saws General survey, designation and multilingual nomenclature. ISO 6106, Abrasive products Grain sizes of diamond or cubic boron nitride. 3 Dimensions 3.1 Saws used principally for stone cutting Licensed Copy:
15、 sheffieldun sheffieldun, na, Tue Nov 28 13:51:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 2064-3:1990 2 BSI 12-1999 Dimensions in millimetres Position Narrow slotWide slotNarrow slot with elongated teeth DD1EABL1Number of teeth BL1Number of teeth BL1Number of teeth tol.tol.tol.tol.tol.tol. 012
16、00190 0,3 1,3 0,05 14 13 0,5 42,913 8 0,541,7123 0,546,712 022001901,8 0,07 032502401,5 0,0541,317 10 0,5 40,215 3 0,5 47,215 043002901,8 0,07 40,42140,61847,618 053503402,239,72540,82147,821 064003902,540,72841,1244824 07450440 0,5 2,8 0,114 13 0,5 40,23212 0,5 41,2 26 3 0,5 50,126 085004902,839,73
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-2064-3-1990 ISO-6105-1988 BS 2064 1990 ISO 6105 1988
链接地址:https://www.31doc.com/p-3730795.html