BS-3414-2000.pdf
《BS-3414-2000.pdf》由会员分享,可在线阅读,更多相关《BS-3414-2000.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 3414:2000 Incorporating Corrigendum No. 1 Specification for hand-held crown bottle openers ICS 97.040.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 09:16:04 GMT+00:00 2006, Uncontrolled Copy, (c) B
2、SI BS 3414:2000 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 May 2000 BSI 15 May 2002 First published 1961 Withdrawn February 1992 Reins
3、tated as second edition May 2000 The following BSI references relate to the work on this standard: Committee reference PKW/2/1 Draft for comment 99/711103 DC ISBN 0 580 33141 5 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Commit
4、tee PKW/2/1, Glass packaging, upon which the following bodies were represented: Association of the British Pharmaceutical Industry Brewers and Licensed Retail Association British Glass Manufacturers Confederation British Retail Consortium British Soft Drinks Association Limited Campden and Chorleywo
5、od Food Research Association Consumer Policy Committee of BSI Dairy Industry Federation Department of Trade and Industry (Consumer Safety Unit, CA Division) Royal Society for the Prevention of Accidents Welsh Beekeepers Association Wine and Spirit Association of Great Britain Amendments issued since
6、 publication Amd. No.DateComments 13677 Corrigendum No. 1 15 May 2002Correction of Clause 6 and A.4 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 09:16:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3414:2000 BSI 15 May 2002 i Contents Page Committees responsibleInside front cover Forewor
7、dii 1Scope1 2Normative references1 3Material1 4Dimensions1 5Shape1 6Marking1 Annex A (informative) Recommendations for use of crown bottle openers3 Bibliography3 Figure 1 Nominal dimensions2 Figure 2 Dimensions of opening space2 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 09:16:04 GMT+00:
8、00 2006, Uncontrolled Copy, (c) BSI BS 3414:2000 ii BSI 15 May 2002 Foreword This British Standard has been prepared by Technical Committee PKW/2/1. A previous edition, BS 3414:1961, was withdrawn in February 1992. Many types of opener are used for bottles closed with a crown cap, and large numbers
9、of hand-held openers are distributed freely as advertisements. While most designs at present on the market are satisfactory, a few are inefficient and possibly even dangerous. However, it is neither practical nor desirable to impose unnecessary limitation on the design of openers. This British Stand
10、ard attempts, without restricting design, to specify essential characteristics of crown bottle openers, which will ensure their safety and efficiency. Safety and efficiency depend to a considerable extent upon how the bottle opener is used. It cannot, therefore, be assumed that an opener conforming
11、to this standard will always operate safely and efficiently. It is not always recognized by users that bottle openers are subject to wear and tear, and that there may be a loss of efficiency after long use. It is desirable that bar-mounted openers, in particular, be periodically inspected, and if ne
12、cessary replaced. The standard relates essentially to the commonly used aperture types of hand-held opener. The specified key dimensions of the working head may be applicable to other types of opener, including bar-mounted openers, which are outside the scope of this standard. A British Standard doe
13、s not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an insi
14、de front cover, pages i and ii, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 09:16:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3414:2000 BSI 15 May 2002 1 1
15、Scope This British Standard specifies requirements for crown bottle openers designed for the standard crown closures specified in CE.T.I.E. data sheet EC 1-02 1, to suit the glass bottle finishes specified in CE.T.I.E. data sheets GME 13.01 2 and GME 13.02 3. It applies to hand-held openers of the a
16、perture type. NOTERecommendations concerning the use of crown bottle openers are given in annex A. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this British Standard. For dated references, subsequent amend
17、ments to, or revisions of, any of these publications do not apply. For undated references, the latest edition of the publication referred to applies. BS EN ISO 6507-1:1998, Metallic materials Vickers hardness test Part 1: Test method. 3 Material 3.1 Elasticity The opener shall be manufactured from m
18、aterial having a modulus of elasticity which exceeds 200 kN/mm2. NOTESteel is a suitable material in this respect. 3.2 Resistance to wear The areas of the opener which are in direct contact with the closure shall have a minimum hardness value of 490 HV 5, determined in accordance with BS EN ISO 6507
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 3414 2000
链接地址:https://www.31doc.com/p-3731215.html