BS-3424-38-1998.pdf
《BS-3424-38-1998.pdf》由会员分享,可在线阅读,更多相关《BS-3424-38-1998.pdf(8页珍藏版)》请在三一文库上搜索。
1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS 3424-38:1998 ICS 59.08
2、0.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Testing coated fabrics Part 38: Method 41. Determination of wounded burst strength Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:17:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3424-38:1998 This British Stand
3、ard, having been prepared under the direction of the Materials and Chemicals Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 1998 BSI 1998 The following BSI references relate to the work on this standard: Committee reference TCI/78
4、Draft for comment 97/125026 DC ISBN 0 580 28237 6 Amendments issued since publication Amd. No.DateText affected Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/78 Coated fabrics, upon which the following bodies were r
5、epresented: British Plastics Federation British Rubber Manufacturers Association Ltd. British Textile Technology Group Fira International Home Office Made-up Textiles Association Ministry of Defence RAPRATechnology Ltd. SATRATechnology Centre Society of British Aerospace Companies Limited Textile In
6、stitute Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:17:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3424-38:1998 BSI 1998i Contents Page Committees responsibleInside front cover Forewordii 1Scope1 2Normative references1 3Principle1 4Apparatus and materials1 5Preparation of test spe
7、cimens1 6Conditioning1 7Wet testing1 8Procedure1 9Calculation and expression of results3 10Test report3 Figure 1 Example of bursting attachment2 Figure 2 Example of location pins3 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:17:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii BSI 1998 B
8、S 3424-38:1998 Foreword This British Standard has been prepared by Technical Committee TCI/78. Textile materials and coated fabrics have traditionally been tested by inserting a cut in the transverse or machine direction of the material in order to produce a specimen that can be mounted in the jaws
9、of a standard tensile testing machine. Upon separation of the jaws, the test specimen is torn apart. Analysis of the resulting autographic trace has been a cause of dispute about whether it is the highest value of all the maximum peaks on a particular test that is required, the mean of all the maxim
10、um peaks, or the lowest value and/or mean of the minimum values attained. In certain cases, a mid-point between the mean of the maximum peaks and the mean of the minimum values may also be required. In practice, many users are not concerned with the actual value of the material but only with the fac
11、t that the material has torn. Another problem with such a test is that the tear propagates in a direction that is not aligned with the direction of application of the force. The present test is presented as a proposed solution to some of these difficulties, although it is accepted that the test may
12、not find universal application. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary o
13、f pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 3, and a back cover. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:17:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 19981 BS 3424-38:1998 1 Scope This Part of BS 3424 describes a method o
14、f test for determining the omnidirectional wounded burst resistance of a coated fabric when subjected to a force exerted by a traversing sphere moving at right angles to the plane of the coated fabric. 2 Normative references The following normative documents contain provisions which, through referen
15、ce in this text, constitute provisions of this part of this British Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. For undated references, the latest edition of the publication referred to applies. BS 5214-1, Specification for testi
16、ng machines for rubbers and plastics Part 1: Tensile, flexural and compression types (constant rate of traverse). BS EN ISO 2231, Rubber- or plastics-coated fabrics Standard atmospheres for conditioning and testing. 3 Principle A test specimen having a centrally punched hole of 3 mm diameter is plac
17、ed concentrically in the ring clamp of a ball burst test apparatus. The traversing ball exerts a force on the hole until rupture occurs across the full width of the aperture of the internal ring mechanism (see 4.2). The maximum force thus exerted is recorded. 4 Apparatus and materials 4.1 Constant r
18、ate tensile testing machine, capable of maintaining a constant rate of traverse and conforming to Grade B of BS 5214-1. 4.2 Bursting attachment (Figure 1 provides an example), such that the test specimen is held securely by a ring mechanism of internal diameter 45 mm0.5 mm, with the centre of the te
19、st specimen pressed against an incompressible ball of 38 mm0.2 mm diameter. The ball moves at right angles to the plane of the coated fabric at a constant rate of 100 mm/min10 mm/min. The clamping surfaces of the upper and lower clamps are grooved concentrically such that the crowns of the grooves o
20、f one plate fit the grooves of the other. The grooves are not less than 0.8 mm apart and not less than 0.15 mm deep. The first outer groove of each plate is not less than 3 mm from the outer rim of the plate. Each groove has a radius not less than 0.4 mm and the lower inner edge of the upper clamp a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 3424 38 1998
链接地址:https://www.31doc.com/p-3731216.html