BS 1679-6-1994.pdf
《BS 1679-6-1994.pdf》由会员分享,可在线阅读,更多相关《BS 1679-6-1994.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 1679-6: 1994 Containers for pharmaceutical dispensing Part 6: Specification for glass medicine bottles UDC 615.014.8:621.798.147-033.5 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 24 03:29:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 1679-6:1994 This British Standard,
2、having been prepared under the direction of the Packaging and Freight Containers Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 May 1994 BSI 07-1999 First published October 1967 Second edition February 1984 Third edition May 1994 The
3、following BSI references relate to the work on this standard: Committee reference PKM/27 Draft for comment 93/305994 DC ISBN 0 580 22859 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Packaging and Freight Containers Standards Policy
4、Committee (PKM/-) to Technical Committee PKM/27, upon which the following bodies were represented: Association of British Health-care Industries Association of Clinical Pathologists British Glass Manufacturers Confederation Department of Health Guild of Hospital Pharmacists Metal Packaging Manufactu
5、rers Association National Pharmaceutical Association Pharmaceutical Services Negotiating Committee Public Health Laboratory Service Pira International Royal College of Ophthalmologists Royal Pharmaceutical Society of Great Britain Amendments issued since publication Amd. No.DateComments Licensed Cop
6、y: sheffieldun sheffieldun, na, Fri Nov 24 03:29:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 1679-6:1994 BSI 07-1999i Contents Page Committees responsibleInside front cover Forewordii 1Scope1 2References1 3Nominal capacity and reference number1 4Materials1 5Design and construction1 6Marking4 7P
7、erformance4 8Closures4 Annex A (normative) Method of test for light transmission5 Figure 1 Style and dimensions of medicine bottles2 Table 1 Nominal capacity and reference number1 Table 2 Brimfull capacity and dimensions of medicine bottles3 List of referencesInside back cover Licensed Copy: sheffie
8、ldun sheffieldun, na, Fri Nov 24 03:29:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 1679-6:1994 ii BSI 07-1999 Foreword This Part of BS 1679 has been prepared under the direction of the Packaging and Freight Containers Standards Policy Committee, at the request of the Royal Pharmaceutical Societ
9、y of Great Britain. It supersedes BS 1679-6:1984, which is withdrawn. This Part is one of a series, originally prepared at the request of the then Ministry of Health, specifying containers suitable for use by pharmacists in National Health Service dispensing. It has now been revised to change the ne
10、ck finish described in earlier editions to the standard R3 neck finish, in order to permit the use of a wider range of closures, including those which, in combination with the bottles specified, may enable the container (the combination of bottle plus closure) to conform to BS EN 28317 Child-resista
11、nt packaging. Requirements and testing procedures for reclosable packages. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer
12、 immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated i
13、n the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 24 03:29:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 1679-6:1994 BSI 07-19991 1 Scope This Part of BS 1679 specifies requirements for materials, design and construction for a range of glass bott
14、les for dispensing liquid medicines for oral use. 2 References 2.1 Normative references This Part of BS 1679 incorporates, by dated or undated reference, provisions from other publications. These normative references are made at the appropriate places in the text and the cited publications are liste
15、d on the inside back cover. For dated references, only the edition cited applies; any subsequent amendments to, or revisions of, the cited publication apply to this Part of BS 1679 only when incorporated in the reference by amendment or revision. For undated references, the latest edition of the cit
16、ed publication applies, together with any amendments. 2.2 Informative references This Part of BS 1679 refers to other publications that provide information or guidance. Editions of these publications current at the time of issue of this standard are listed on the inside back cover, but reference sho
17、uld be made to the latest editions. 3 Nominal capacity and reference number The nominal capacities and corresponding reference numbers for the range shall be as given in Table 1. Table 1 Nominal capacity and reference number 4 Materials The bottles shall be made from amber or white flint soda-lime-s
18、ilica glass. 5 Design and construction 5.1 The brimfull capacity, nominal mass and principal dimensions of the bottles shall be as given in Table 2. 5.2 The shape of the bottles shall be as shown in Figure 1, as defined by the dimensions given in Table 2. 5.3 The dimensions and profile of the neck f
19、inish of the bottles shall be as specified in BS 1918-1:1978 for the R3/22 and R3/28 neck finishes. NOTEUnits for all dimensions (including finishes), capacities, mass and tolerances are expressed as specified in BS 4602. Nominal capacity ml Reference number 50N50 100N 100 150N 150 200N 200 300N 300
20、 500N 500 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 24 03:29:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 1679-6:1994 2 BSI 07-1999 NOTEAll bottles in this series have profiles similar to that illustrated, consistent with the dimensions given. Figure 1 Style and dimensions of medicine
21、bottles Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 24 03:29:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 1679-6:1994 BSI 07-19993 Table 2 Brimfull capacity and dimensions of medicine bottles Reference number CapacityNominal massPrincipal dimensions (See Figure 1) Design dimensionsa (See
22、 Figure 1)Neck finishb BrimfullToleranceABCDEF GRHR (nominal capacity in ml)mlmlg max. mm min. mm max. mm max. mmmmmmmmmmmmR3 size N5057.1 3.05399.997.946.428.012.748.621.137.0110.022 N 100108.6 4.592120.2118.257.634.915.958.221.145.0135.022 N 150160.6 5.5129134.6132.465.139.417.465.121.151.0155.022
23、 N 200213 6.0171148.1145.971.343.119.071.425.556.0170.028 N 300318 7.5236168.6166.281.249.122.281.725.564.0195.028 N 500519.5 9.5360196.3193.995.457.925.496.425.575.0225.028 a These dimensions are for mould-making purposes only. b For neck finish, see BS 1918-1:1978. Licensed Copy: sheffieldun sheff
24、ieldun, na, Fri Nov 24 03:29:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 1679-6:1994 4 BSI 07-1999 6 Marking The base of each bottle shall be embossed with: a) the reference number (see Table 1); b) the manufacturers name or trade mark; c) the mould number. 7 Performance 7.1 Transmission of lig
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 1679-6-1994 1679 1994
链接地址:https://www.31doc.com/p-3731572.html