AS-NZS-CISPR-13-2004.pdf
《AS-NZS-CISPR-13-2004.pdf》由会员分享,可在线阅读,更多相关《AS-NZS-CISPR-13-2004.pdf(45页珍藏版)》请在三一文库上搜索。
1、AS/NZS CISPR 13:2004 CISPR 13:2003 and CISPR 13:2003 Amdt 1:2003 Australian/New Zealand Standard Sound and television broadcast receivers and associated equipment Radio disturbance characteristics Limits and methods of measurement AS/NZS CISPR 13:2004 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 07
2、Oct 2008 AS/NZS CISPR 13:2004 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee TE-003, Electromagnetic Interference. It was approved on behalf of the Council of Standards Australia on 2 June 2004 and on behalf of the Council of Standards New Zealand on 11 June 200
3、4. It was published on 6 July 2004. The following are represented on Committee TE-003: Australian Broadcasting Authority Australian Broadcasting Corporation Australian Chamber of Commerce and Industry Australian Communications Authority Australian Electrical and Electronic Manufacturers Association
4、Australian Information Industry Association CSIRO Telecommunications and Industrial Physics Commercial Television Australia Department of Defence (Australia) Electrical Compliance Testing Association Institution of Engineers Australia Ministry of Economic Development (New Zealand) SingTel Optus Soci
5、ety of Automotive EngineersAustralasia Telstra Corporation University of Western Australia Wireless Institute Australia Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically re
6、viewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. D
7、etailed information about joint Australian/New Zealand Standards can be found by visiting the Standards Web Shop at .au or Standards New Zealand web site at www.standards.co.nz and looking up the relevant Standard in the on-line catalogue. Alternatively, both organizations publish an annual printed
8、Catalogue with full details of all current Standards. For more frequent listings or notification of revisions, amendments and withdrawals, Standards Australia and Standards New Zealand offer a number of update options. For information about these services, users should contact their respective natio
9、nal Standards organization. We also welcome suggestions for improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Please address your comments to the Chief Executive of either Standards Australia International or Standard
10、s New Zealand at the address shown on the back cover. This Standard was issued in draft form for comment as DR 04199. Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Oct 2008 AS/NZS CISPR 13:2004 Australian/New Zealand Standard Sound and television broadcast receivers and associated equipment Radio
11、disturbance characteristics Limits and methods of measurement Originated as AS 10531973. Previous edition AS/NZS CISPR 13:2003. Second edition 2004. COPYRIGHT Standards Australia/Standards New Zealand All rights are reserved. No part of this work may be reproduced or copied in any form or by any mea
12、ns, electronic or mechanical, including photocopying, without the written permission of the publisher. Jointly published by Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001 and Standards New Zealand, Private Bag 2439, Wellington 6020 ISBN 0 7337 6123 2 Accessed by UNIVERSITY OF
13、SOUTH AUSTRALIA on 07 Oct 2008 ii PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee TE-003, Electromagnetic Interference to supersede AS/NZS CISPR 13:2003. This Standard is identical with, and has been reproduced from, CISPR 13:2003, Sound and televi
14、sion broadcast receivers and associated equipmentRadio disturbance characteristicsLimits and methods of measurement, which incorporates CISPR 13 Amdt 1:2003. The objective of this Standard is to specify the generation of electromagnetic energy from sound and television receivers for the reception of
15、 broadcast and similar transmissions and from associated equipment. The frequency range covered extends from 9 kHz to 400 GHz. The terms normative and informative are used to define the application of the annex to which they apply. A normative annex is an integral part of a standard, whereas an info
16、rmative annex is only for information and guidance. As this Standard is reproduced from an International Standard, the following applies: (a) Its number does not appear on each page of text and its identity is shown only on the cover and title page. (b) In the source text this International Standard
17、 should read this Australian/New Zealand Standard. (c) A full point should be substituted for a comma when referring to a decimal marker. (d) Any French text on figures should be ignored. Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Oct 2008 iii CONTENTS Page 1 Scope and object1 2 Normative refer
18、ences .1 3 Definitions and abbreviations2 3.1 Definitions .2 3.2 Abbreviations 3 4 Limits of disturbance.3 4.1 General .3 4.2 Disturbance voltage at the mains terminals3 4.3 Disturbance voltage at the antenna terminals 4 4.4 Wanted signal and disturbance voltage at the RF output of equipment with in
19、corporated or with add-on RF video modulator5 4.5 Disturbance power.5 4.6 Radiated disturbances.6 4.7 Radiated power .6 5 Measurement procedures .7 5.1 General .7 5.2 Test signals.7 5.3 Disturbance voltage at the mains terminals in the frequency range 150 kHz to 30 MHz8 5.3.1 General .8 5.3.2 Televi
20、sion receivers.8 5.3.3 Sound receivers.9 5.3.4 Associated equipment9 5.3.5 Audio amplifiers.9 5.3.6 Measurement of the disturbance voltage at the mains terminals 10 5.4 Measurement of disturbance voltage at the antenna terminals of a receiver and associated equipment with an RF input in the frequenc
21、y range 30 MHz to 2,15 GHz .10 5.4.1 General .10 5.4.2 Measurement on receivers or associated equipment with coaxial antenna connections .10 5.4.3 Measurement on receivers or associated equipment with balanced antenna connectors.11 5.4.4 Presentation of the results.11 5.5 Measurement of the wanted s
22、ignal and disturbance voltage at the RF output terminals of associated equipment with an RF video modulator, in the frequency range 30 MHz to 2,15 GHz 11 5.5.1 Introduction .11 5.5.2 Method of measurement 11 5.6 Measurement of disturbance power of associated equipment (video recorders excluded) in t
23、he frequency range 30 MHz to 1 GHz .11 5.6.1 General .11 5.6.2 Method of measurement 12 5.6.3 Measuring procedure.12 5.6.4 Presentation of the results.12 5.7 Measurement of radiation in the frequency range 30 MHz to 1 GHz at 3 m distance.13 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Oct 2008 iv
24、 5.7.1 Introduction .13 5.7.2 Measuring site requirements13 5.7.3 Disposition of the receiver under test.14 5.7.4 Disposition of the field-strength meter14 5.7.5 Measurement procedure 15 5.8 Measurement of radiation in the frequency range 1 GHz to 18 GHz .15 5.8.1 Measuring set-up.15 5.8.2 Test site
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AS NZS CISPR 13 2004
链接地址:https://www.31doc.com/p-3732791.html