《ANSI-Z245.51-2008.pdf》由会员分享,可在线阅读,更多相关《ANSI-Z245.51-2008.pdf(73页珍藏版)》请在三一文库上搜索。
1、 ANSI Z245.51 - 2008 American National Standard American National Standard ANSI Z245.51 - 2008 ENVIRONMENTAL INDUSTRY A S S O C I A T I O N S for Equipment Technology and Operations for Wastes and Recyclable Materials Baling Equipment Safety Requirements WASTE EQUIPMENT TECHNOLOGY ASSOCIATION A PART
2、 OF THE ENVIRONMENTAL INDUSTRY ASSOCIATIONS 4301 CONNECTICUT AVENUE, NW SUITE 300 WASHINGTON, DC 20008 TELEPHONE: 202-244-4700 FAX: 202-966-4824 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 M
3、DTNo reproduction or networking permitted without license from IHS -,-,- ANSI Z245.51 - 2008 American National Standard for Equipment Technology and Operations for Wastes and Recyclable Materials Baling Equipment Safety Requirements Secretariat Environmental Industry Associations Approved February 2
4、7, 2008 American National Standards Institute, Inc. Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,- American National St
5、andard Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial
6、 agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use
7、 of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American Nationa
8、l Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Ins
9、titute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require t
10、hat action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute, 25 W. 42nd Street, New York, New York, 10036, Phone: 212-642-49
11、00, Fax: 212-398-0023. Published by Waste Equipment Technology Association (Part of Environmental Industry Associations) 4301 Connecticut Ave., N. W., Washington, D.C. 20008 Copyright 2008 by the Environmental Industry Associations All rights reserved No part of this publication may be reproduced in
12、 any form, in an electronic retrieval system or otherwise, without prior permission of the publisher. Printed in the United States of America Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTN
13、o reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 Table of Contents Page Foreword (informative) iv 0 Introduction (informative)1 1 Scope .2 2 Normative references .2 3 Definitions2 4 Construction 4.1 General15 4.2 Component requirement
14、s15 4.3 Construction requirements, tests and evaluation criteria16 5 Safeguards and features 5.1 Access covers .18 5.2 Service openings.18 5.3 Controls .18 5.4 Operating switches and sensors.18 5.5 Security switch.18 5.6 Emergency controls.19 5.7 Interlocks .19 5.8 Guarding19 5.9 Container/cart lift
15、ing systems .20 5.10 Start-up alarms21 5.11 Vertical downstroke balers additional safety features23 5.12 Vertical upstroke balers additional safety features.23 5.13 Horizontal balers additional safety features .24 6 Markings 6.1 General .24 6.2 Marking of permanently connected equipment.25 6.3 Marki
16、ng of cord connected equipment26 6.4 Marking of components.26 6.5 Caution, warning and danger markings27 6.6 Permanence of markings28 7 Instructions 7.1 General29 7.2 Installation and operating instructions.29 Annexes A Bibliography (informative) A.1 American National Standards .31 A.2 U.S. Governme
17、nt Health it does not denote a mandatory requirement. 3.78 start-up alarm: An audible and visible alarm distinctive and recognizable as a signal to provide warning that the baler will begin to operate. 7 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee
18、=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 3.79 sustained manual pressure control: A control that requires continuous pressure by the operator to allow the baler to o
19、perate. 3.80 system: The combined use of several technologies, normally stand-alone, in an integrated fashion for the simultaneous or sequential processing of materials (such as, shredders, trommels, conveyors, etc ). 3.81 system pressure: The range of operating pressures ranging between normal and
20、maximum operating pressure in the hydraulic system as stated by the manufacturer. 3.82 unattended baler with automatic startup: Baling equipment where the main motor will start and the baler will cycle automatically while unattended when activated by a signal from a sensor or a sequencing program or
21、 device. 3.83 waste: Any type of solid wastes (except human wastes) such as garbage, trash, rubbish, ashes, incineration residue, street cleanings, plant trimmings, solids, semi-solids, liquids or gases, or the like which are generated and discarded by commercial, industrial, and residential activit
22、ies. Excluded are solid or dissolved materials such as domestic sewage and solid or dissolved materials in irrigation return flows or industrial discharges. This definition does include material diverted from the waste stream for the purpose of recycling. 3.84 working surface: Any surface on which e
23、mployees perform job duties or upon which employees are required to work while performing assigned tasks. 8 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permi
24、tted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 Figure 1 Vertical Downstroke Baler 9 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networ
25、king permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 Figure 2 Vertical Upstroke Baler (Chain Driven) 10 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTN
26、o reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 Figure 3 Horizontal Extrusion Baler Figure 4 Horizontal Closed-Chamber Baler 11 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing C
27、o/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 Figure 5 Two-Stage Vertical-Horizontal (Continuous) Extrusion Baler 12 Copyright American National Standards Institute Provided by I
28、HS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 Figure 6 Two-Stage Horizontal Baler (Two Compression Strokes) 13 Copyright American Nati
29、onal Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 Figuder re 7 Two-Stage Horizontal Baler With Singl
30、e-Compression Cylin 14 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 4 Co
31、nstruction 4.1 General 4.1.1 Balers shall be designed and constructed with consideration for the reduction of the risk of fire, electrical shock or injury to persons during operation and maintenance. NOTE 1: Consideration shall be given to reasonably foreseeable misuse of the baler for its intended
32、application. It is not expected that every possible misuse will be foreseen, but the manufacturer should use its best judgment and experience to reduce the risk of fire, electrical shock or injury to persons during installation, operation and maintenance of the baler. NOTE 2: An optional, functional
33、 attachment that is made available or recommended by the manufacturer for use with the basic equipment shall be included in the evaluation of the equipment. Unless the manufacturer recommends the use of two or more attachments at the same time, only one attachment at a time is to be evaluated with t
34、he equipment. NOTE 3: Whether a guard, an interlock, or the like is required and whether such a device is adequate shall be determined from an evaluation of the complete equipment, its operating characteristics, and the likelihood of a risk of injury to persons resulting from a cause other than negl
35、igence. The evaluation shall include consideration of the results of breakdown or malfunction of any one component, but not more than one component at a time, unless one event contributes to another. If the evaluation shows that breakdown or malfunction of a particular component results in a risk of
36、 injury to persons, that component shall be evaluated for reliability. 4.2 Component requirements 4.2.1 Except as indicated in 4.2.2, a component of a baler covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components gene
37、rally used in the equipment covered by this standard. 4.2.2 A component need not comply with a specific requirement that: a) Involves a feature or characteristic not needed in the application of the component in the equipment covered by this standard, or b) Is superseded by a requirement in this sta
38、ndard. 4.2.3 A component shall be used in accordance with its recognized rating established for the intended conditions of use. 4.2.4 Specific components may be recognized as being incomplete in construction features or restricted in performance capabilities. Such components are intended for use onl
39、y under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions for which they have been recognized. 15 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/591077000
40、1 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 4.3 Construction requirements, tests and evaluation criteria 4.3.1 Mechanical components and construction features of balers shall be in accord
41、ance with Table 1. Table 1 Mechanical construction requirements and performance evaluation criteria Feature or component Requirement (See Annex B) Specific performance tests and evaluation criteria (See Annex D) Sharpness of edges B.1.1 Adhesives B.1.2 UL 746C Corrosion protection B.1.3 Mechanical e
42、nclosures and guards B.2 Mechanical components and assembly B.3 Rotating and moving parts B.4 D.8 Hydraulic systems B.5.1 Hydraulic system hoses B.5.2 Hydraulic system couplings and fittings B.5.3 Hydraulic system control valves B.6 UL 429; UL 842 Hydraulic system relief valves B.7.1 - B.7.6 Hydraul
43、ic system reservoirs B.7.7 Stability B.8 D.7 Structural integrity B.9 16 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=Boeing Co/5910770001 Not for Resale, 10/23/2008 02:24:29 MDTNo reproduction or networking permitted without license from IHS -,-,-
44、 AMERICAN NATIONAL STANDARD ANSI Z245.51-2008 4.3.2 Electrical equipment used in balers shall be in accordance with Table 2. Table 2 Electrical construction requirements and performance evaluation criteria Feature or component Requirement (See Annex C) Specific performance tests and evaluation crite
45、ria (See Annex D) Electrical enclosures C.2 UL 50, with environmental rating equivalent to the intended use of the baler Access to uninsulated live parts and film- coated wire C.3 Cords and plugs of cord-connected equipment C.4.1.1 Strain relief for cords on cord-connected equipment C.4.1.2 D.5 Bush
46、ings for cords on cord-connected equipment C.1.4.3 D.6 Permanently connected equipment a. General b. Terminal compartment c. Wiring terminals and leads d. Identification of terminals and leads C.5.1 C.5.2 C.5.3 C.5.4 Current-carrying parts C.6 Insulating material C.7 Mechanical protection of interna
47、l wiring C.8.1 Slices and connections of internal wiring C.8.2 Separation of circuits C.8.3 Grounding a. General b. Grounding identification C.10.1 C.10.2 Heating elements C.11 Listed heater(s) UL 1030 for sheathed heating elements Motors C.12.1 UL 1004 a. Construction b. Overload protection C.12.2 Motor utilizes UL 508A controller or meets requirements of C.12.2.1 - C 12.2.4 Overload- or thermal-protective devices C.13 UL 508A or meets requirements of C.13.1 - C.13.6 Switches, controls and interlocks C.14 Spacings C.15 Starting
链接地址:https://www.31doc.com/p-3732794.html