BS-7007-1-1988 ISO-2422-1986.pdf
《BS-7007-1-1988 ISO-2422-1986.pdf》由会员分享,可在线阅读,更多相关《BS-7007-1-1988 ISO-2422-1986.pdf(6页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7007-1: 1988 ISO 2422:1986 Abrasive products Part 1: Specification for dimensions and designation of truncated cone abrasive sleeves ISO title: Truncated cone abrasive sleeves Dimensions and designation UDC 621.922.025:62 229.225:(083.3) + .006.02 Licensed Copy: London South Bank
2、 University, London South Bank University, Fri Dec 08 11:34:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7007-1:1988 This British Standard, having been prepared under the direction of the Machine, Engineers and Hand Tool Standards Committee, was published under the authority of the Board of BSI
3、and comes into effect on 30 September 1988 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MTE/3 Special announcement BSI News June 1988 ISBN 0 580 16787 9 Committees responsible for this British Standard The preparation of this British Standard was
4、entrusted by the Machine, Engineers and Hand Tool Standards Committee (MTE/-) to Technical Committee MTE/3, upon which the following bodies were represented: Abrasive Industries Association Advanced Manufacturing Technology Research Institute British Paper and Board Industry Federation Coated Abrasi
5、ves Manufacturers Association Electronic Components Industry Association Coopted member Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:34:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7007-
6、1:1988 BSI 10-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope and field of application1 2Dimensions1 3Designation1 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:34:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7007
7、-1:1988 ii BSI 10-1999 National foreword This Part of BS 7007 has been prepared under the direction of the Machine, Engineers and Hand Tool Standards Committee. It is identical with ISO 2422:1986 “Truncated cone abrasive sleeves Dimensions and designation”, published by the International Organizatio
8、n for Standardization (ISO). The other Parts of BS 7007 are as follows: Part 2: Specification for designation and dimensions of coated abrasive flap wheels with shafts; Part 3: Specification for dimensional tolerances on non-standard coated abrasive products. Terminology and conventions. The text of
9、 the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is drawn especially to the following. Wherever the words “International Standa
10、rd” or “ISO 2422” appear, referring to this standard, they should be read as “Part of BS 7007” and “BS 7007-1” respectively. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance
11、 with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises of a front cover, an inside front cover, pages i and ii, page 1 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated.
12、 This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:34:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7007-1:1988 BSI 10-19991 1 Scope and field of application This International Standard
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7007-1-1988 ISO-2422-1986 BS 7007 1988 ISO 2422 1986
链接地址:https://www.31doc.com/p-3735705.html