BS-7016-4-1988 ISO-7967-4-1988.pdf
《BS-7016-4-1988 ISO-7967-4-1988.pdf》由会员分享,可在线阅读,更多相关《BS-7016-4-1988 ISO-7967-4-1988.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7016-4: 1988 ISO 7967-4: 1988 Components and systems of reciprocating internal combustion engines Part 4: Glossary of terms for pressure charging and air/exhaust gas ducting systems ISO title: Reciprocating internal combustion engines Vocabulary of components and systems Part 4:
2、Pressure charging and air/exhaust gas ducting systems UDC 62 833 + 62 24:(038) Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 This British Standard, having been prepared under the direction of t
3、he Machinery and Components Standards Committee, was published under the authority of the Board of BSI and comes into effect on 30 December 1988 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MCE/14 Draft for comment 86/78268 DC ISBN 0 580 16865 4 C
4、ommittees responsible for this British Standard The preparation of this British Standard was entrusted by the Machinery and Components Standards Committee (MCE/-) to Technical Committee MCE/14, upon which the following bodies were represented: Association of Consulting Engineers British Railways Boa
5、rd Ministry of Defence Society of Motor Manufacturers and Traders Ltd. The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of British Generating Set Manufacturers BEAMA Ltd. Marine Engine and Equipment Manufacturers Association Am
6、endments issued since publication Amd. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-1999i Contents Page Committees responsibleInside front cover National forewo
7、rdii 0Introduction1 1Scope and field of application2 2Reference2 3Arrangement of terms and definitions2 4Pressure charging and scavenging units3 5Air inlet and exhaust pipes and manifolds8 6Air filtration system9 7Silencers9 8Charge air cooler10 9Exhaust gas cleaners10 Indexes English11 French13 Rus
8、sian14 Publication referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 ii BSI 10-1999 National foreword This Part of BS 7016 has been prepared under the direction of the
9、Machinery and Components Standards Committee and is identical with ISO 7967-4:1988 “Reciprocating internal combustion engines Vocabulary of components and systems Part 4: Pressure charging and air/exhaust gas ducting systems” published by the International Organization for Standardization (ISO). ISO
10、 7967 consists of nine Parts which are listed in clause 0. Parts 1 to 9 of ISO 7967 will be implemented as Parts 1 to 9 of BS 7016. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminol
11、ogy and certain conventions are not identical with those used in British Standards; attention is drawn especially to the following. Wherever the words “part of ISO 7967” appear, referring to this standard, they should be read as “Part of BS 7016”. A British Standard does not purport to include all t
12、he necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International StandardCorresponding British Standard ISO 2710:1978BS 5676:197
13、9 Vocabulary for reciprocating internal combustion engines (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 14, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments
14、incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-19991 Licensed Copy: London South Bank University, Lo
15、ndon South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 2 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-19993 Licensed Copy:
16、 London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 4 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7016-4-1988 ISO-7967-4-1988 BS 7016 1988 ISO 7967
链接地址:https://www.31doc.com/p-3735711.html