BS-7109-3-1990 EN-27816-3-1992 ISO-IEC-7816-3-1989.pdf
《BS-7109-3-1990 EN-27816-3-1992 ISO-IEC-7816-3-1989.pdf》由会员分享,可在线阅读,更多相关《BS-7109-3-1990 EN-27816-3-1992 ISO-IEC-7816-3-1989.pdf(34页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7109-3: 1990 EN 27816-3: 1992 ISO/IEC 7816-3:1989 Incorporating Amendments Nos. 1 and 2 and implementing Amendment No. 3, not published separately Guide to Design and use of identification cards having integrated circuits with contacts Part 3: Electronic signals and transmission
2、protocols The European Standard EN 27816-3:1992 has the status of a British Standard ICS 35.240.40 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 09:59:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7109-3:1990 This British Standard, having been prepared unde
3、r the direction of the Information Systems Technology Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on 30 June 1990 BSI 11-1998 The following BSI references relate to the work on this standard: Committee reference IST/17 Draft for comment 85/
4、66275 DC ISBN 0 580 18616 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Information Systems Technology Standards Policy Committee (IST/-) to Technical Committee IST/17, upon which the following bodies were represented: Association fo
5、r Payment Clearing Services British Printing Industries Federation British Tape Industry Association British Telecommunications plc Building Societies Association Department of Trade and Industry (National Physical Laboratory) Electronic Components Industry Federation Electronics and Business Equipm
6、ent Association GAMBICA (BEAMA Ltd.) Her Majestys Stationery Office Home Office Institute of Data Processing Management (User Standards Forum for Information Technology) Institute of Trading Standards Administration Railway Industry Association of Great Britain Amendments issued since publication Am
7、d. No.DateComments 7325November 1992 7988July 1995 8742January 1997Indicated by a sideline in the margin Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 09:59:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7109-3:1990 BSI 11-1998i Contents Page Committees resp
8、onsibleInside front cover National forewordii Foreword2 1Scope3 2Normative references3 3Definitions3 4Electrical characteristics of the contacts3 5Operating procedure for integrated circuit(s) cards5 6Answer-to-reset8 7Protocol type selection (PTS)13 8Protocol type T=0, asynchronous half duplex char
9、acter transmission protocol15 9Protocol type T=1, asynchronous half duplex block transmission protocol17 Annex A (informative) Scenarios25 Figure 1 Reset of the card6 Figure 2 Reset of a card when a synchronous answer is expected7 Figure 3 Character frame8 Figure 4 General configuration of the answe
10、r-to-reset9 Figure 5 Initial character TS9 Figure 6 Information provided by T010 Figure 7 Information provided by TDi10 Figure 8 Byte transmission diagram16 Figure 9 Block structure19 Figure 10 Character waiting time (CWT)20 Figure 11 Block guardtime (BGT) and block waiting time (BWT)20 Figure 12 Ch
11、aining function22 Figure 13 Coding of I-block PCB24 Figure 14 Coding of R-block PCB24 Figure 15 Coding of S-block PCB24 Figure X Schematic representation of mode selection and switching12 Figure Y Coding of the specific mode byte13 Figure Z Structure of PTS request/response14 Table 1 Electrical char
12、acteristics of I/O under normal operation conditions4 Table 2 Electrical characteristics of VPP under normal operation conditions4 Table 3 Electrical characteristics of CLK under normal operation conditions5 Table 4 Electrical characteristics of RST under normal operation conditions5 Table 5 Electri
13、cal characteristics of VCC under normal operation conditions5 Table 6 Clock rate conversion factor F12 Table 7 Bit rate adjustment factor D12 Table 8 Maximum programming current factor I12 Table 9 Procedure bytes17 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08
14、 09:59:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7109-3:1990 ii BSI 11-1998 National foreword This British Standard is the English language version of EN 27816-3:1992 including its amendments A1:1993 and A2:1995 and implements it as the UK national standard. This British Standard is published
15、 under the direction of the Information Systems Technology Standards Policy Committee whose Technical Committee IST/17 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and kee
16、p UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not purpo
17、rt to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front co
18、ver, pages i and ii, the EN title page, pages 2 to 28 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Ban
19、k University, Fri Dec 08 09:59:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 27816-3 April 1992 +A1 November 1993 +A2 October 1995 UDC 351.755.62:621.3.049.77 Descriptors: Data processing, information interchange, identification cards, integrated
20、circuits, data transmission, communication procedure, protocols, signals, electrical properties English version Identification cards Integrated circuit(s) cards with contacts Part 3: Electronic signals and transmission protocols (includes amendment A1:1993 and amendment A2:1995) (ISO/IEC 7816-3:1989
21、 edition 1) Cartes didentification Cartes circuit(s) intgr(s) contacts Partie 3: Signaux lectroniques et protocoles de transmission (ISO/IEC 7816-3:1989 dition 1) Kennkarten Karten mit integrierten Schaltkreisen und mit Kontaktstcken Teil 3: Elektronische Signale und bertragungsprotokoll (ISO/IEC 78
22、16-3:1989 Ausgabe 1) This European Standard was approved by CEN on 1992-04-11, amendment A1 was approved by CEN on 1993-11-25, amendment A2 was approved by CEN on 1995-03-09. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro
23、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English
24、, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finl
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7109-3-1990 EN-27816-3-1992 ISO-IEC-7816-3-1989 BS 7109 1990 EN 27816 1992 ISO IEC 7816 1989
链接地址:https://www.31doc.com/p-3735762.html