BS-7178-1989 EN-281-1988.pdf
《BS-7178-1989 EN-281-1988.pdf》由会员分享,可在线阅读,更多相关《BS-7178-1989 EN-281-1988.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7178:1989 EN 281:1988 Specification for Construction and layout of pedals of self-propelled industrial trucks sit-down rider-controlled The European Standard EN 281 has the status of a British Standard. UDC 621.868.2 8:629.043.062 Licensed Copy: London South Bank University, Lond
2、on South Bank University, Fri Dec 08 12:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7178:1989 This British Standard, having been prepared under the direction of the Mechanical Handling Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on
3、31 October 1989 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference MHE/7 Draft for comment 84/76276 DC ISBN 0 580 17589 8 Cooperating organizations The European Committee for Standardization, under whose supervision this European Standard was prepared,
4、comprises the national standards organizations of the following Western European countries. AustriaOesterreichisches Normungsinstitut BelgiumInstitut belge de normalisation DenmarkDansk Standardiseringsraad FinlandSuomen Standardisoimisliito, r.y. FranceAssociation franaise de normalisation GermanyD
5、eutsches Institut fr Normung e.V. GreeceHellenic Organization for Standardization IcelandIcelandic Council for Standardization IrelandNational Standards Authority of Ireland ItalyEnte Nazionale Italiano di Unificazione LuxemburgInspection des travails et des mines NetherlandsNederlands Normalisatie-
6、instituut NorwayNorges Standardiseringsforbund PortugalInstituto Portugus da Qualidade SpainInstituto Espaol de Normalizacin SwedenStandardiseringskommissionen i Sverige SwitzerlandAssociation suisse de normalisation United KingdomBritish Standards Institution Amendments issued since publications Am
7、d. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7178:1989 BSI 08-1999i Contents Page Cooperating organizationsInside front cover National forewordii Brief history2 Foreword2 Text
8、of EN 2813 National appendix AInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7178:1989 ii BSI 08-1999 National foreword This British Standard has been prepared under the direction of the M
9、echanical Handling Standards Policy Committee and is the English language version of EN 281 “Self-propelled industrial trucks sit-down rider-controlled; Rules for the construction and layout of pedals” published by the European Committee for Standardization (CEN). EN 281 was produced as a result of
10、international discussion in which the UK took an active part. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fro
11、m legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indic
12、ated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 281 December 1988 UDC 621.868.2 8:629.043.062 Key word
13、s: Industrial trucks, self-propelled machines, pedals, specifications, human factors engineering, layout, building codes English version Self-propelled industrial trucks sit-down rider-controlled; Rules for the construction and layout of pedals Chariots de manutention automoteurs conduction assis; R
14、gles de construction et de configuration des pdales Kraftbetriebene Flurfrderzeuge mit Fahrersitz; Regeln fr die Ausfhrung und Anordnung der Pedale This European Standard was accepted by CEN on 2 November 1988. CEN members are bound to comply with the requirements of the CEN/CENELEC Rules which stip
15、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Central Secretariat or to any CEN member. This European Standa
16、rd exists in the official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to CEN Central Secretariat has the same status as the official versions. CEN members are the national standard
17、s organizations of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung C
18、entral Secretariat: rue de Stassart 36, B-1050 Brussels CEN 1988. Copyright reserved to all CEN members Ref. No. EN 281:1988E Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 281:1988 2 BSI 08-1999 Brief hist
19、ory This standard has been prepared by a Working Group of CEN/BT (Technical Board). It is based on a draft proposal submitted to CEN by FEM (Fdration Europenne de la Manutention). The original FEM document was submitted to the Primary Questionnaire (PQ) procedure, to determine its acceptability to C
20、EN members as the basis for a European Standard. This standard was required in order to fulfil the requirements of the standardization request of 6 January 1987, given to CEN by the CEC (Commission of the European Communities) and subsequently endorsed by the EFTA. The standard has been compiled to
21、meet requirements of Point 9.5.1 Annex 1 to the directive 86/663/EEC adopted by the EEC Council with the object of harmonizing the legal requirements of member states for self-propelled sit-down rider-controlled industrial trucks. In accordance with the Common CEN/CENELEC Rules, the following countr
22、ies are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Foreword This standard has been established to supplement clause 8.4.1.1 o
23、f ISO Standard 3691, second edition 1980-11-15 (Powered industrial trucks Safety code), in order to standardize pedal layout, construction and function. Contents Page Brief History2 Foreword2 1Object and field of application3 2References3 3Definitions3 4Requirements3 5Identification3 6Design and man
24、ufacture4 7Pedal layouts4 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 281:1988 BSI 08-19993 1 Object and field of application This standard establishes the requirements for pedals where used for the cont
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7178-1989 EN-281-1988 BS 7178 1989 EN 281 1988
链接地址:https://www.31doc.com/p-3735803.html