BS-7330-4-1990 ISO-9655-1989.pdf
《BS-7330-4-1990 ISO-9655-1989.pdf》由会员分享,可在线阅读,更多相关《BS-7330-4-1990 ISO-9655-1989.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7330-4: 1990 ISO 9655:1989 Pliers and nippers for electronics Part 4: Specification for dimensions of single-purpose pliers for gripping and manipulating Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:34:49 GMT+00:00 2006, Uncontrolled Co
2、py, (c) BSI BS 7330-4:1990 This British Standard, having been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on 30 September 1990 BSI 12-1999 The following BSI references re
3、late to the work on this standard: Committee reference MTE/15 Draft for comment 88/74391 DC ISBN 0 580 18653 9 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machine, Engineers and Hand Tools Standards Policy Committee (MTE/-) to Techni
4、cal Committee MTE/15, upon which the following bodies were represented: British Coal Corporation British Telecommunications plc Consumer Policy Committee of BSI Department of Trade and Industry Mechanical Engineering and Manufacturing Technology Division (MMT) Electricity Supply Industry in England
5、and Wales Federation of British Engineers Tool Manufacturers Federation of British Hand Tool Manufacturers Handle Manufacturers Association Institute of Carpenters Institute of Trading Standards Administration Institution of Production Engineers Ministry of Defence Amendments issued since publicatio
6、n Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:34:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7330-4:1990 BSI 12-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative references1 3Dime
7、nsions1 Figure 11 Figure 22 Figure 33 Table 11 Table 22 Table 33 Publication(s) referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:34:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7330-4:1990 ii BSI 12-1999 National foreword This
8、Part of BS 7330, which has been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee, is identical with ISO 9655:1989 “Pliers and nippers for electronics Pliers for gripping and manipulating” published by the International Organization for Standardization
9、(ISO). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International Sta
10、ndardCorresponding British Standard BS 7330 Pliers and nippers for electronics ISO 8979:1988Part 1:1990 Nomenclature (Identical) ISO 9656:1989Part 3:1990 Methods of test (Identical) ISO 9657:1989Part 2:1990 Specification for general requirements (Identical) Summary of pages This document comprises a
11、 front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South
12、 Bank University, London South Bank University, Fri Dec 08 11:34:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7330-4:1990 BSI 12-19991 1 Scope This International Standard specifies the principal dimensions of single-purpose pliers for electronics for gripping and manipulating. The test methods f
13、or checking their proper functioning are given in ISO 9656. The general technical requirements are given in ISO 9657. The pliers illustrated in this International Standard are only examples and are not intended to affect the manufacturers design. 2 Normative references The following standards contai
14、n provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate
15、 the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 8979:1988, Pliers and nippers for electronics Nomenclature. ISO 9656:1989, Pliers and nippers for electronics Test methods
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7330-4-1990 ISO-9655-1989 BS 7330 1990 ISO 9655 1989
链接地址:https://www.31doc.com/p-3735854.html