BS-7560-1992 ISO-8210-1989.pdf
《BS-7560-1992 ISO-8210-1989.pdf》由会员分享,可在线阅读,更多相关《BS-7560-1992 ISO-8210-1989.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7560:1992 ISO 8210:1989 Method of Assessing, testing and reporting characteristics and performance of combine harvesters Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 13:21:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7560:1992 This Bri
2、tish Standard, having been prepared under the direction of the Agricultural Machinery and Implements Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 1 April 1992 BSI 11-1999 The following BSI references relate to the work on this standard
3、: Committee reference AGE/23 Draft for comment 85/79520 DC ISBN 0 580 20600 9 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Agricultural Machinery and Implements Standards Policy Committee (AGE/-) to Technical Committee AGE/23, upon wh
4、ich the following bodies were represented: Agricultural Engineers Association British Agricultural and Garden Machinery Association Ltd. Council of Scottish Agricultural Colleges Department of Agriculture and Fisheries for Scotland Flour Milling and Baking Research Association Health and Safety Exec
5、utive Ministry of Agriculture, Fisheries and Food National Farmers Union National Farmers Union of Scotland National Institute of Agricultural Engineering National Union of Agricultural and Allied Workers Silsoe College Spring Research and Manufacturers Association Amendments issued since publicatio
6、n Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 13:21:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7560:1992 BSI 11-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative references1 3Defini
7、tions1 4General requirements2 5Characteristics of machine2 6Functional field tests2 7Capacity tests3 8Test report6 Annex A (normative) Tests on sloping ground7 Publication(s) referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 13:21:33 G
8、MT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7560:1992 ii BSI 11-1999 National foreword This British Standard has been prepared under the direction of the Agricultural Machinery and Implements Standards Policy Committee and is identical with ISO 8210:1989 “Equipment for harvesting Combine harvesters
9、 Test procedure” prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, of the International Organization for Standardization (ISO). Technical Committee AGE/23 has reviewed the provisions of ISO 500:19791); ISO 3767-1:1982; ISO 3767-2:1982; ISO 3789-1:1982; I
10、SO 3789-2:1982; ISO 3965:19772); ISO 4254-1:1989; ISO/TR 5007:1980; ISO 5131:1982; ISO 5702:1983; ISO 6689:1981 to which reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. ISO 6095, to which reference is made in clause 2 and 6.2.2.1, ha
11、s not yet been published. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of page
12、s This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.
13、Cross-references International StandardCorresponding British Standard BS 6347: Performance assessment of agricultural tractors ISO 789-3:1982Part 3:1983 Method for determination of turning and clearance diameters (Identical) ISO 789-6:1982Part 6:1983 Method for determination of centre of gravity (Id
14、entical) ISO 3600:1981BS 5401:1982a Guide for the presentation of operator manuals and technical publications dealing with tractors and machinery for agriculture and forestry (Identical) ISO 5687:1981BS 6621:1985 Method for determination of combine harvester capacity and unloading rate (Identical) I
15、SO 5697:1982BS 6384:1983 Methods for determination of braking performance of agricultural and forestry vehicles (Identical) a BS 5401 has been revised and is now only related to ISO 3600. 1) Now superseded by ISO 500:1991 which is identical to BS 5861:1992. 2) Now superseded by ISO 3965:1990 which i
16、s identical to BS 5510:1991. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 13:21:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7560:1992 BSI 11-19991 1 Scope This International Standard specifies a test procedure for combine harvesters; it applies to all ty
17、pes of combine harvesters. The test procedure specified in this International Standard deals with the measurement and testing of combine harvesters, either of self-propelled or trailed type, either directly cutting the crop or picking it up from a wind-row, for use in several crops. It indicates ter
18、minology and methods to be used for measuring important characteristics of combines. It includes both functional and capacity tests, i.e. those conducted over an extended period when ease of operation, ease of adjustment, rate of work and general operating characteristics may be assessed, and those
19、carried out on specific occasions for the determination of grain loss and capacity characteristics. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions
20、indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below. Members of IEC and ISO maintain registers of currently valid I
21、nternational Standards. ISO 500:1979, Agricultural tractors Power take-off and drawbar Specification. ISO 789-3:1982, Agricultural tractors Test procedures Part 3: Turning and clearance diameters. ISO 789-6:1982, Agricultural tractors Test procedures Part 6: Centre of gravity. ISO 3600:1981, Tractor
22、s and machinery for agriculture and forestry Operator manuals and technical publications Presentation. ISO 3767-1:1982, Tractors and machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols. ISO 3767-2:1982, Tra
23、ctors and machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machinery. ISO 3789-1:1982, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Location
24、and method of operation of operator controls Part 1: Common controls. ISO 3789-2:1982, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Location and method of operation of operator controls Part 2: Controls for agricultural tractors and machinery. ISO 3965:1977, Ag
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7560-1992 ISO-8210-1989 BS 7560 1992 ISO 8210 1989
链接地址:https://www.31doc.com/p-3735932.html