BS-7568-18-1992 ISO-9448-2-1991.pdf
《BS-7568-18-1992 ISO-9448-2-1991.pdf》由会员分享,可在线阅读,更多相关《BS-7568-18-1992 ISO-9448-2-1991.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7568-18: 1992 ISO 9448-2: 1991 Press tools Part 18: Guide bushes Gliding bushes, plain, type 1 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-18:1992 This British Standard, having b
2、een prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1992 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MTE
3、/12 Draft for comment 89/79318 DC ISBN 0 580 20952 0 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machine, Engineers and Hand Tools Standards Policy Committee (MTE/-) to Technical Committee MTE/12, upon which the following bodies were
4、 represented: Advanced Manufacturing Technology Research Institute Amalgamated Engineering Union Gauge and Tool Makers Association Coopted member Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:00 GM
5、T+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-18:1992 BSI 10-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Dimensions1 3Material and corresponding hardness1 4Designation1 Annex A (informative) BibliographyInside back cover Figure 11 Table 12 Licensed Co
6、py: London South Bank University, London South Bank University, Fri Dec 08 11:39:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-18:1992 ii BSI 10-1999 National foreword This Part of BS 7568 has been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committ
7、ee. It is identical with ISO 9448-2:1991 “Tools for pressing Guide bushes Part 2, Form A, gliding bushes, plain, type 1”, prepared by Technical Committee ISO/TC29, Small tools, and published by the International Organization for Standardization (ISO). A British Standard does not purport to include a
8、ll the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i an
9、d ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University
10、, Fri Dec 08 11:39:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-18:1992 BSI 10-19991 1 Scope This part of ISO 9448 specifies the main dimensions and tolerances, in millimetres, of guide bushes of form A, plain gliding bushes, type 1, intended for use in press tools and to be mounted in the
11、clamp plate by means of interference fit. It gives guidance on the materials, and specifies the hardness and the designation of bushes in accordance with this part of ISO 9448. 2 Dimensions See Figure 1 and Table 1. Details not stated such as chamfers, radii, lubrication grooves, etc., are left to t
12、he manufacturers discretion. 3 Material and corresponding hardness The material is left to the manufacturers discretion and the hardness shall be 60HRC. 4 Designation A guide bush in accordance with this part of ISO 9448 shall be designated by a) “Guide bush” b) a reference to this part of ISO 9448;
13、 c) its form; d) its guiding diameter, D1, in millimetres; e) its length, l1, in millimetres. EXAMPLE A guide bush of form A, plain gliding bush, type 1, of guiding diameter D1 = 12 mm and of length l1 = 25 mm is designated as follows: Guide bush ISO 9448-2 A 12 25 +2 0 Figure 1 Licensed Copy: Londo
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7568-18-1992 ISO-9448-2-1991 BS 7568 18 1992 ISO 9448 1991
链接地址:https://www.31doc.com/p-3735949.html