BS-7568-25-1993 ISO-9182-1-1992.pdf
《BS-7568-25-1993 ISO-9182-1-1992.pdf》由会员分享,可在线阅读,更多相关《BS-7568-25-1993 ISO-9182-1-1992.pdf(6页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7568-25: 1993 ISO 9182-1: 1992 Press tools Part 25: Guide pillars Types UDC 621.979.07 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-25:1993 This British Standard, having been prep
2、ared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 September 1993 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MTE/12 D
3、raft for comment 91/76086 DC ISBN 0 580 22523 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machine, Engineers and Hand Tools Standards Policy Committee (MTE/-) to Technical Committee MTE/12, upon which the following bodies were repr
4、esented: Advanced Manufacturing Technology Research Institute Amalgamated Engineering Union Gauge and Tool Makers Association Coopted member Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:37 GMT+00:
5、00 2006, Uncontrolled Copy, (c) BSI BS 7568-25:1993 BSI 10-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Types, methods of mounting and dimensions1 Figure 11 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:37 GMT
6、+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-25:1993 ii BSI 10-1999 National foreword This Part of BS 7568 has been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee. It is identical with ISO 9182-1:1992 Tools for pressing Guide pillars Part 1: Types
7、, prepared by Technical Committee ISO/TC29, Small Tools, and published by the International Organization for Standardization (ISO). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Com
8、pliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, page 1 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorpora
9、ted. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-25:1993 BSI 10-19991 1 Scope This part of ISO 9182 illustrates four main typ
10、es of guide pillars and their methods of mounting. 2 Types, methods of mounting and dimensions The guide pillars represented in Figure 1 illustrate the types only; these representations shall not influence the manufacturers design. The detailed dimensions of each type of guide pillar are given in th
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7568-25-1993 ISO-9182-1-1992 BS 7568 25 1993 ISO 9182 1992
链接地址:https://www.31doc.com/p-3735976.html